# packages

pkgId: 3f8a5643fac071511ae7e8363c7efcef23dc63f332023ba2a2407da5960bdeae
name: perl-LWP-Protocol-http10
arch: noarch
version: 6.03
epoch: 0
release: 41.fc44
summary: Legacy HTTP/1.0 support for LWP
url: https://metacpan.org/release/LWP-Protocol-http10
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-LWP-Protocol-http10-6.03-41.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-LWP-Protocol-http10-6.03-41.fc44.noarch.rpm
checksum_type: sha256
description:
  The LWP::Protocol::http10 module provides support for using HTTP/1.0
  protocol with LWP. To use it you need to call LWP::Protocol::implementor()
  to override the standard handler for http URLs.


pkgId: dfd99172a66cf1199a782340f8b131737fe40b4df51ba187e2d8a348bcdf2946
name: perl-LWP-Protocol-https
arch: noarch
version: 6.14
epoch: 0
release: 5.fc44
summary: Provide HTTPS support for LWP::UserAgent
url: https://metacpan.org/release/LWP-Protocol-https
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-LWP-Protocol-https-6.14-5.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-LWP-Protocol-https-6.14-5.fc44.noarch.rpm
checksum_type: sha256
description:
  The LWP::Protocol::https module provides support for using HTTPS schemed
  URLs with LWP. This module is a plug-in to the LWP protocol handling, so
  you don't use it directly. Once the module is installed LWP is able to
  access sites using HTTP over SSL/TLS.


pkgId: 9a074c819caba55b299f9a476bcd59cf3af99c9803ce86c5f1a87e07bd052e90
name: perl-LWP-UserAgent-DNS-Hosts
arch: noarch
version: 0.14
epoch: 0
release: 16.fc44
summary: Override LWP HTTP/HTTPS request's host like /etc/hosts
url: https://metacpan.org/release/LWP-UserAgent-DNS-Hosts
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-LWP-UserAgent-DNS-Hosts-0.14-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-LWP-UserAgent-DNS-Hosts-0.14-16.fc44.noarch.rpm
checksum_type: sha256
description:
  LWP::UserAgent::DNS::Hosts is a module to override HTTP/HTTPS request peer
  addresses that uses LWP::UserAgent.  This module concept was got from
  LWP::Protocol::PSGI.


pkgId: a777d4eefdd50e9ee4f94e47d6f0681e1d3f4c71e6c4104ebb241f65b0bd27a8
name: perl-LWP-UserAgent-Determined
arch: noarch
version: 1.07
epoch: 0
release: 34.fc44
summary: Virtual browser that retries errors
url: https://metacpan.org/release/LWP-UserAgent-Determined
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-LWP-UserAgent-Determined-1.07-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-LWP-UserAgent-Determined-1.07-34.fc44.noarch.rpm
checksum_type: sha256
description:
  This class works just like LWP::UserAgent (and is based on it, by being a
  subclass of it), except that when you use it to get a web page but run into
  a possibly-temporary error (like a DNS lookup timeout), it'll wait a few
  seconds and retry a few times.


pkgId: 998b3bd314b8239a9cb5f0c4dba0d4e7f05ad61d4aa23aa0ea74eb8ee9a54351
name: perl-LaTeX-ToUnicode
arch: noarch
version: 1.93
epoch: 0
release: 2.fc44
summary: Convert LaTeX commands to Unicode
url: https://metacpan.org/release/LaTeX-ToUnicode
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-36.rdu3.fedoraproject.org
rpm_sourcerpm: perl-LaTeX-ToUnicode-1.93-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-LaTeX-ToUnicode-1.93-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This Perl module provides a method to convert LaTeX-style markups for accents
  etc. into their Unicode equivalents. It translates commands for special
  characters or accents into their Unicode equivalents and removes
  formatting commands.


pkgId: 87a4c01537b49945a49760a9c4e27e2dc8c2e7e27f032607a1b55e815b92da03
name: perl-Language-Functional
arch: noarch
version: 0.05
epoch: 0
release: 40.fc44
summary: Module which makes Perl slightly more functional
url: https://metacpan.org/release/Language-Functional
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Language-Functional-0.05-40.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Language-Functional-0.05-40.fc44.noarch.rpm
checksum_type: sha256
description:
  Perl already contains some functional-like functions, such as map and grep.
  The purpose of this module is to add other functional-like functions to
  Perl, such as foldl and foldr, as well as the use of infinite lists.


pkgId: 03651ee4857648bc301bec7e2321c30d94e61d3c4c810d83ef6d3d4c618822ce
name: perl-Language-Prolog-Sugar
arch: noarch
version: 0.06
epoch: 0
release: 39.fc44
summary: Syntactic sugar for Prolog term constructors
url: https://metacpan.org/release/Language-Prolog-Sugar
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Language-Prolog-Sugar-0.06-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Language-Prolog-Sugar-0.06-39.fc44.noarch.rpm
checksum_type: sha256
description:
  Language::Prolog::Sugar is able to export to the calling package a set of
  subroutines to create Prolog terms as defined in the
  Language::Prolog::Types module. Perl programs using these constructors have
  the same look as real Prolog programs.


pkgId: fd04451552571896977f63eeb151e689fa4f8f0742747bca49276ab2bb410599
name: perl-Language-Prolog-Types
arch: noarch
version: 0.10
epoch: 0
release: 39.fc44
summary: Prolog types in Perl
url: https://metacpan.org/release/Language-Prolog-Types
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-16.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Language-Prolog-Types-0.10-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Language-Prolog-Types-0.10-39.fc44.noarch.rpm
checksum_type: sha256
description:
  This module exports subroutines to create Prolog terms in Perl, to test
  term types and also some utility functions to convert data between Prolog
  and Perl explicitly.


pkgId: 6ed70e5a8b1ce8110c2fc05cc4662fefeb86f2313e9a73146194664170a45367
name: perl-Lchown
arch: x86_64
version: 1.01
epoch: 0
release: 35.fc44
summary: Use the lchown(2) system call from Perl
url: https://metacpan.org/release/Lchown
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lchown-1.01-35.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lchown-1.01-35.fc44.x86_64.rpm
checksum_type: sha256
description:
  Provides a perl interface to the lchown() system call. lchown() changes
  ownership of a file, but does not dereference symbolic links.


pkgId: 688e97d75038ac68c76f0283ba93754819aac76cd32ffe321404b89af500fb2a
name: perl-Lexical-Persistence
arch: noarch
version: 1.023
epoch: 0
release: 31.fc44
summary: Persistent lexical variable values for arbitrary calls
url: https://metacpan.org/release/Lexical-Persistence
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lexical-Persistence-1.023-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lexical-Persistence-1.023-31.fc44.noarch.rpm
checksum_type: sha256
description:
  Lexical::Persistence does a few things, all related. Note that all the
  behaviors listed here are the defaults. Subclasses can override nearly
  every aspect of Lexical::Persistence's behavior.


pkgId: 42af2bf0d49996300f3a89358cbf8920f42f9df47a3d17cb35000b44040b076a
name: perl-Lexical-SealRequireHints
arch: x86_64
version: 0.012
epoch: 0
release: 12.fc44
summary: Prevent leakage of lexical hints
url: https://metacpan.org/release/Lexical-SealRequireHints
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lexical-SealRequireHints-0.012-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lexical-SealRequireHints-0.012-12.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module works around two historical bugs in Perl's handling of the %^H
  (lexical hints) variable. One bug causes lexical state in one file to leak
  into another that is required/used from it. This bug [perl #68590], was
  present from Perl 5.6 up to Perl 5.10, fixed in Perl 5.11.0. The second bug
  causes lexical state (normally a blank %^H once the first bug is fixed) to
  leak outwards from utf8.pm, if it is automatically loaded during Unicode
  regular expression matching, into whatever source is compiling at the time
  of the regexp match. This bug [perl #73174], was present from Perl 5.8.7
  up to Perl 5.11.5, fixed in Perl 5.12.0.


pkgId: b4838be2e3bd964c8eb48d00c2651df08bc7dc638e5ca8454bb129e89852426c
name: perl-Lexical-SealRequireHints-tests
arch: x86_64
version: 0.012
epoch: 0
release: 12.fc44
summary: Tests for perl-Lexical-SealRequireHints
url: https://metacpan.org/release/Lexical-SealRequireHints
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lexical-SealRequireHints-0.012-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lexical-SealRequireHints-tests-0.012-12.fc44.x86_64.rpm
checksum_type: sha256
description:
  Tests from perl-Lexical-SealRequireHints. Execute them
  with "/usr/libexec/perl-Lexical-SealRequireHints/test".


pkgId: 7c6da0cdd35148423f83049c8d23c729b2bebf633c04852a63c486b9cbd22662
name: perl-Lexical-Var
arch: x86_64
version: 0.010
epoch: 0
release: 11.fc44
summary: Static variables without name space pollution
url: https://metacpan.org/release/Lexical-Var
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lexical-Var-0.010-11.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lexical-Var-0.010-11.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module implements lexical scoping of static variables and subroutines.
  Although it can be used directly, it is mainly intended to be
  infrastructure for modules that manage name spaces.


pkgId: e9881f0519337d486b2fe6b63bd6aaa40bb0abef38f070917752f8c7c7284f3e
name: perl-Library-CallNumber-LC
arch: noarch
version: 0.23
epoch: 0
release: 30.fc44
summary: Normalize Library of Congress call numbers for sorting
url: https://metacpan.org/release/Library-CallNumber-LC
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) OR LicenseRef-Callaway-BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Library-CallNumber-LC-0.23-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Library-CallNumber-LC-0.23-30.fc44.noarch.rpm
checksum_type: sha256
description:
  This module takes Library of Congress (LC) call numbers and normalizes them so
  that they are comparable with each other. This supports sorting and
  left-anchored searching, such that searching "A11*" should give you all the A11
  call numbers.


pkgId: 05fcb4e6658101f849878cbd2ed4bef477804bf5b4f84cc8c34f4d7fbfbe2f24
name: perl-License-Syntax
arch: noarch
version: 0.13
epoch: 0
release: 31.fc44
summary: Coding and decoding of license strings using SPDX and SUSE syntax
url: https://metacpan.org/release/License-Syntax
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-36.rdu3.fedoraproject.org
rpm_sourcerpm: perl-License-Syntax-0.13-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-License-Syntax-0.13-31.fc44.noarch.rpm
checksum_type: sha256
description:
  License::Syntax is an object oriented module.  When constructing new
  License::Syntax objects, you can provide a mapping table for license
  names.  The table is used for recognizing alternate alias names for the
  licenses (left hand side) and also defines the canonical short names of
  the licenses (right hand side).  The mapping table is consulted twice,
  before and after decoding the syntax, thus non-terminal mappings may
  actually be followed.


pkgId: 27e33fee9ee20180a756c44c4bdcac906be680860f6efa31a1a894e2a6084052
name: perl-Lingua-EN-Alphabet-Shaw
arch: noarch
version: 0.64
epoch: 0
release: 37.fc44
summary: Transliterate the Latin to Shavian alphabets
url: https://metacpan.org/release/Lingua-EN-Alphabet-Shaw
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-Alphabet-Shaw-0.64-37.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-Alphabet-Shaw-0.64-37.fc44.noarch.rpm
checksum_type: sha256
description:
  The Shaw or Shavian alphabet was commissioned by the will of the playwright
  George Bernard Shaw in the early 1960s as a replacement for the Latin
  alphabet for representing English. It is designed to have a one-to-one
  phonemic (not phonetic) mapping with the sounds of English.


pkgId: 23c39362e605ec33c19f3622d760722743453b3e0ceed92c5cd59a967be1b2ce
name: perl-Lingua-EN-Fathom
arch: noarch
version: 1.27
epoch: 0
release: 7.fc44
summary: Measure readability of English text
url: https://metacpan.org/release/Lingua-EN-Fathom
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-Fathom-1.27-7.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-Fathom-1.27-7.fc44.noarch.rpm
checksum_type: sha256
description:
  This module analyses English text in either a string or file. Totals are
  then calculated for the number of characters, words, sentences, blank and
  non blank (text) lines and paragraphs.


pkgId: a9f258e9c93b0619dbd52103c7d87f1fc00a329520da95c47323aa2007a02460
name: perl-Lingua-EN-FindNumber
arch: noarch
version: 1.32
epoch: 0
release: 29.fc44
summary: Locate (written) numbers in English text
url: https://metacpan.org/release/Lingua-EN-FindNumber
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-FindNumber-1.32-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-FindNumber-1.32-29.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a regular expression for finding numbers in
  English text. It also provides functions for extracting and
  manipulating such numbers.


pkgId: d446622c79792f1ec3278be2cd969b1683f5f05521a9f41d6770362553e11c27
name: perl-Lingua-EN-Number-IsOrdinal
arch: noarch
version: 0.05
epoch: 0
release: 31.fc44
summary: Detect if English number is ordinal or cardinal
url: https://metacpan.org/release/Lingua-EN-Number-IsOrdinal
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-Number-IsOrdinal-0.05-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-Number-IsOrdinal-0.05-31.fc44.noarch.rpm
checksum_type: sha256
description:
  This module will tell you if a number, either in words or as digits, is a
  cardinal or ordinal number.


pkgId: 8c8a2856635f95d6b20db6fe9a543fbee7ce4a83103c7e184ad1e5fbc99414b8
name: perl-Lingua-EN-Numbers
arch: noarch
version: 2.03
epoch: 0
release: 29.fc44
summary: Turn "407" into "four hundred and seven", etc
url: https://metacpan.org/release/Lingua-EN-Numbers
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-Numbers-2.03-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-Numbers-2.03-29.fc44.noarch.rpm
checksum_type: sha256
description:
  Lingua::EN::Numbers turns numbers into English text. It exports (upon
  request) two functions, num2en and num2en_ordinal. Each takes a scalar
  value and returns a scalar value. The return value is the English text
  expressing that number; or if what you provided wasn't a number, then they
  return undefined.


pkgId: 28c8124aebf3b5d88fa0cabdfa3269b3cf5818762eab24cb035f4c664dfb92e5
name: perl-Lingua-EN-Numbers-Easy
arch: noarch
version: 2014120401
epoch: 0
release: 31.fc44
summary: Hash access to Lingua::EN::Numbers objects
url: https://metacpan.org/release/Lingua-EN-Numbers-Easy
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-19.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-Numbers-Easy-2014120401-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-Numbers-Easy-2014120401-31.fc44.noarch.rpm
checksum_type: sha256
description:
  Lingua::EN::Numbers is a module that translates numbers to English words.
  Unfortunately, it has an object oriented interface, which makes it hard to
  interpolate them in strings. Lingua::EN::Numbers::Easy translates numbers
  to words using a tied hash, which can be interpolated.


pkgId: dc68ac487554e20eec5e566b4fe32aabba21b85fda5f585416b5443f3367618a
name: perl-Lingua-EN-Numbers-Ordinate
arch: noarch
version: 1.05
epoch: 0
release: 14.fc44
summary: Perl functions for giving the ordinal form of a number given its cardinal value
url: https://metacpan.org/release/Lingua-EN-Numbers-Ordinate
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-Numbers-Ordinate-1.05-14.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-Numbers-Ordinate-1.05-14.fc44.noarch.rpm
checksum_type: sha256
description:
  There are two kinds of numbers in English -- cardinals (1,
  2, 3...), and ordinals (1st, 2nd, 3rd...).  This library
  provides functions for giving the ordinal form of a number,
  given its cardinal value.


pkgId: c89478d73f9312547ca9812d5d462875271f5b46a3f09fcf75522769b06e5fba
name: perl-Lingua-EN-Numbers-Ordinate-tests
arch: noarch
version: 1.05
epoch: 0
release: 14.fc44
summary: Tests for perl-Lingua-EN-Numbers-Ordinate
url: https://metacpan.org/release/Lingua-EN-Numbers-Ordinate
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-Numbers-Ordinate-1.05-14.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-Numbers-Ordinate-tests-1.05-14.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Lingua-EN-Numbers-Ordinate. Execute them
  with "/usr/libexec/perl-Lingua-EN-Numbers-Ordinate/test".


pkgId: 9ab4dcd871f390ed834b56b6fc6ea4ec89d24610a08d5007ee48e022c1eadf86
name: perl-Lingua-EN-Sentence
arch: noarch
version: 0.34
epoch: 0
release: 8.fc44
summary: Module for splitting text into sentences
url: https://metacpan.org/release/Lingua-EN-Sentence
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-Sentence-0.34-8.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-Sentence-0.34-8.fc44.noarch.rpm
checksum_type: sha256
description:
  The Lingua::EN::Sentence module contains the function get_sentences, which
  splits text into its constituent sentences, based on a regular expression
  and a list of abbreviations (built in and given).


pkgId: 4ef8e5cc548f8c393a9bffbbe9e525afee78eccc585d0c9180c525d60a4a9804
name: perl-Lingua-EN-Tagger
arch: x86_64
version: 0.31
epoch: 0
release: 19.fc44
summary: Part-of-speech tagger for English natural language processing
url: https://metacpan.org/release/Lingua-EN-Tagger
rpm_license: GPL-3.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-Tagger-0.31-19.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-Tagger-0.31-19.fc44.x86_64.rpm
checksum_type: sha256
description:
  The module is a probability based, corpus-trained tagger that assigns POS
  tags to English text based on a lookup dictionary and a set of probability
  values. The tagger assigns appropriate tags based on conditional
  probabilities - it examines the preceding tag to determine the appropriate
  tag for the current word. Unknown words are classified according to word
  morphology or can be set to be treated as nouns or other parts of speech.


pkgId: 9ca70b7903e94b16c539da677f17bbc33c7413dbae9c4fff6b5331e2e57cefa6
name: perl-Lingua-EN-Words2Nums
arch: noarch
version: 0.18
epoch: 0
release: 31.fc44
summary: Convert English text to numbers
url: https://metacpan.org/release/Lingua-EN-Words2Nums
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-EN-Words2Nums-0.18-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-EN-Words2Nums-0.18-31.fc44.noarch.rpm
checksum_type: sha256
description:
  This module converts English text into numbers. It supports both ordinal
  and cardinal numbers, negative numbers, and very large numbers.


pkgId: 36aa172fe313223025401eed035ce02097fea5a544494a542e78f53736adc01a
name: perl-Lingua-PT-Stemmer
arch: noarch
version: 0.02
epoch: 0
release: 28.fc44
summary: Portuguese language stemming
url: https://metacpan.org/release/Lingua-PT-Stemmer
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-PT-Stemmer-0.02-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-PT-Stemmer-0.02-28.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements a Portuguese stemming algorithm proposed in the
  paper A Stemming Algorithm for the Portuguese Language by Moreira, V.
  and Huyck, C.


pkgId: ef7d2d221a091ead74049ef7d8289f96fcea8579df80eb76b9934dfe4080928c
name: perl-Lingua-Preferred
arch: noarch
version: 0.2.4
epoch: 0
release: 49.fc44
summary: Perl extension to choose a language
url: https://metacpan.org/release/Lingua-Preferred
rpm_license: GPL-2.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-Preferred-0.2.4-49.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-Preferred-0.2.4-49.fc44.noarch.rpm
checksum_type: sha256
description:
  Many web browsers let you specify which languages you understand.
  Then they negotiate with the web server to get documents in the best
  language possible.  This is something similar in Perl.


pkgId: 7c08795e611f4adefe4aa99a7bc85f0ba1d678277c50afaa0084a0384d278abe
name: perl-Lingua-Stem
arch: noarch
version: 2.31
epoch: 0
release: 15.fc44
summary: Stemming of words
url: https://metacpan.org/release/Lingua-Stem
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-Stem-2.31-15.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-Stem-2.31-15.fc44.noarch.rpm
checksum_type: sha256
description:
  This routine applies stemming algorithms to its parameters, returning the
  stemmed words as appropriate to the selected locale.


pkgId: 32e3bb28be5d6125390fd4ffb552187a916ac8c364ca3b07a586178424fab0b8
name: perl-Lingua-Stem-Snowball
arch: x86_64
version: 0.952
epoch: 0
release: 55.fc44
summary: Perl interface to Snowball stemmers
url: https://metacpan.org/release/Lingua-Stem-Snowball
rpm_license: ( GPL-1.0-or-later OR Artistic-1.0-Perl ) AND BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-Stem-Snowball-0.952-55.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-Stem-Snowball-0.952-55.fc44.x86_64.rpm
checksum_type: sha256
description:
  Stemming reduces related words to a common root form -- for instance,
  "horse", "horses", and "horsing" all become "hors". Most commonly,
  stemming is deployed as part of a search application, allowing
  searches for a given term to match documents which contain other forms
  of that term.

  This module is very similar to Lingua::Stem -- however, Lingua::Stem
  is pure Perl, while Lingua::Stem::Snowball is an XS module which
  provides a Perl interface to the C version of the Snowball
  stemmers.


pkgId: 6054c162fb13a85cc20a7d3ef9f808965f2442d948b56bb0e6ca8030e43bdd85
name: perl-Lingua-Stem-Snowball-Da
arch: noarch
version: 1.01
epoch: 0
release: 44.fc44
summary: Porter's stemming algorithm for Danish
url: https://metacpan.org/release/Lingua-Stem-Snowball-Da
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-Stem-Snowball-Da-1.01-44.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-Stem-Snowball-Da-1.01-44.fc44.noarch.rpm
checksum_type: sha256
description:
  The stem function takes a scalar as a parameter and stems the word
  according to Martin Porter's Danish stemming algorithm, which can be found
  at the Snowball website: http://snowball.tartarus.org/.


pkgId: 80a734562dcf9727dc71566c613216d6c0d20e168c7aea12cfeb2db36043b4cd
name: perl-Lingua-StopWords
arch: noarch
version: 0.12
epoch: 0
release: 14.fc44
summary: Stop words for several languages
url: https://metacpan.org/release/Lingua-StopWords
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-StopWords-0.12-14.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-StopWords-0.12-14.fc44.noarch.rpm
checksum_type: sha256
description:
  In keyword search, it is common practice to suppress a collection of
  "stopwords": words such as "the", "and", "maybe", etc. which exist in in a
  large number of documents and do not tell you anything important about any
  document which contains them. This module provides such "stoplists" in
  several languages.


pkgId: 5a2c4da63387d26fb9df199de688cdd4cef4fc0715e7b019b2fe6c004e521b31
name: perl-Lingua-Translit
arch: noarch
version: 0.29
epoch: 0
release: 11.fc44
summary: Transliterates text between writing systems
url: https://metacpan.org/release/Lingua-Translit
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lingua-Translit-0.29-11.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lingua-Translit-0.29-11.fc44.noarch.rpm
checksum_type: sha256
description:
  Lingua::Translit can be used to convert text from one writing system to
  another, based on national or international transliteration tables. Where
  possible a reverse transliteration is supported.


pkgId: 58b283b3ca412224f5b96b97f0ff889c1bf1ffb6ed9a8d2a307f5e8424cf8ee6
name: perl-Linux-Inotify2
arch: x86_64
version: 2.3
epoch: 0
release: 15.fc44
summary: Scalable directory/file change notification
url: https://metacpan.org/release/Linux-Inotify2
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Linux-Inotify2-2.3-15.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Linux-Inotify2-2.3-15.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module implements an interface to the Linux 2.6.13+ Inotify
  file/directory change notification system. It has a number of advantages over
  the Linux::Inotify module:
     - it is portable (Linux::Inotify only works on x86)
     - the equivalent of full name works correctly
     - it is better documented
     - it has callback-style interface, which is better suited for integration.


pkgId: 5a43379a947b4ebd9c3bd58b787a8ea2774373719a278943685c518bd85ae0fe
name: perl-Linux-Pid
arch: x86_64
version: 0.04
epoch: 0
release: 61.fc44
summary: Get the native PID and the PPID on Linux
url: https://metacpan.org/release/Linux-Pid
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Linux-Pid-0.04-61.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Linux-Pid-0.04-61.fc44.x86_64.rpm
checksum_type: sha256
description:
  Linux::Pid gets the native PID and the PPID on Linux. It's useful with
  multithreaded programs. Linux's C library returns different values of
  the PID and the PPID from different threads. This module forces Perl
  to call the underlying C functions getpid() and getppid().


pkgId: 6cee8ef58607d5b4d532cff5d8973cf15b1543f7a75a6e94dbd1b8f334a8ee39
name: perl-List-AllUtils
arch: noarch
version: 0.19
epoch: 0
release: 16.fc44
summary: Combines List::Util and List::SomeUtils
url: https://metacpan.org/release/List-AllUtils
rpm_license: Artistic-2.0 AND CC-BY-4.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-List-AllUtils-0.19-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-List-AllUtils-0.19-16.fc44.noarch.rpm
checksum_type: sha256
description:
  Are you sick of trying to remember whether a particular helper is defined
  in List::Util or List::SomeUtils? I sure am. Now you don't have to remember.
  This module will export all of the functions that either of those two
  modules defines.


pkgId: 4c5df9b2a6eeb494375297ac75b0564b40540ec2bfb5bcfb2b1a3b1fdf486751
name: perl-List-MoreUtils
arch: noarch
version: 0.430
epoch: 0
release: 15.fc44
summary: Provide the stuff missing in List::Util
url: https://metacpan.org/release/List-MoreUtils
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-List-MoreUtils-0.430-15.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-List-MoreUtils-0.430-15.fc44.noarch.rpm
checksum_type: sha256
description:
  List::MoreUtils provides some trivial but commonly needed functionality
  on lists that is not going to go into List::Util.


pkgId: 0d28af06c75cc8d4e11bc4f6a38abf64decdd45d0a8a10553272d91409dd97db
name: perl-List-Pairwise
arch: noarch
version: 1.03
epoch: 0
release: 33.fc44
summary: Map/grep arrays and hashes pairwise
url: https://metacpan.org/release/List-Pairwise
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.rdu3.fedoraproject.org
rpm_sourcerpm: perl-List-Pairwise-1.03-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-List-Pairwise-1.03-33.fc44.noarch.rpm
checksum_type: sha256
description:
  List::Pairwise provides functions to map and grep lists two elements at a
  time, setting $a and $b to each pair instead of setting $_ to each element.


pkgId: 1dfafc122626c9cd2a4935eff95b1d05395f31bb5658d4b3265a7706100148a3
name: perl-List-SomeUtils
arch: noarch
version: 0.59
epoch: 0
release: 9.fc44
summary: Provide the stuff missing in List::Util
url: https://metacpan.org/release/List-SomeUtils
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-List-SomeUtils-0.59-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-List-SomeUtils-0.59-9.fc44.noarch.rpm
checksum_type: sha256
description:
  List::SomeUtils provides some trivial but commonly needed functionality on
  lists which is not going to go into List::Util.


pkgId: bbc58b00b12e14cd08c356ae45c95dc8113817a1dcdc56074218d0f9809914b0
name: perl-List-SomeUtils-XS
arch: x86_64
version: 0.58
epoch: 0
release: 27.fc44
summary: XS implementation for List::SomeUtils
url: https://metacpan.org/release/List-SomeUtils-XS
rpm_license: Artistic-2.0 AND ( GPL-1.0-or-later OR Artistic-1.0-Perl )
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-List-SomeUtils-XS-0.58-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-List-SomeUtils-XS-0.58-27.fc44.x86_64.rpm
checksum_type: sha256
description:
  List::SomeUtils provides some trivial but commonly needed functionality on
  lists which is not going to go into List::Util.

  XS implementation is faster than List::SomeUtils.


pkgId: f0d47e3e6bca0bf3bf6a3c954f63a18afbad0565fe9b6dca9eeac055d2929fe1
name: perl-List-UtilsBy
arch: noarch
version: 0.12
epoch: 0
release: 13.fc44
summary: Higher-order list utility functions
url: https://metacpan.org/release/List-UtilsBy
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-List-UtilsBy-0.12-13.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-List-UtilsBy-0.12-13.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a number of list utility functions, all of which take
  an initial code block to control their behaviour. They are variations on
  similar core perl or List::Util functions of similar names, but which use
  the block to control their behaviour. For example, the core Perl function
  sort takes a list of values and returns them, sorted into order by their
  string value. The sort_by function sorts them according to the string value
  returned by the extra function, when given each value.


pkgId: 1fab82b3765b18fa420b45e25429a5f52bd09ce4ee05f5dd8154ce7d1eed6476
name: perl-Locale-Codes
arch: noarch
version: 3.86
epoch: 0
release: 2.fc44
summary: Distribution of modules to handle locale codes
url: https://metacpan.org/release/Locale-Codes
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-36.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-Codes-3.86-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-Codes-3.86-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Locale-Codes is a distribution containing a set of modules. The modules
  each deal with different types of codes which identify parts of the locale
  including languages, countries, currency, etc.


pkgId: 4ffa7cd4f693c6d4ef7cdef8d2611d7e2b215a5dcf3f0a1205cfb61a889935e9
name: perl-Locale-Maketext
arch: noarch
version: 1.33
epoch: 0
release: 522.fc44
summary: Framework for localization
url: https://metacpan.org/release/Locale-Maketext
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-Maketext-1.33-522.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-Maketext-1.33-522.fc44.noarch.rpm
checksum_type: sha256
description:
  It is a common feature of applications (whether run directly, or via the Web)
  for them to be "localized" -- i.e., for them to present an English interface
  to an English-speaker, a German interface to a German-speaker, and so on for
  all languages it's programmed with. Locale::Maketext is a framework for
  software localization; it provides you with the tools for organizing and
  accessing the bits of text and text-processing code that you need for
  producing localized applications.


pkgId: 3fe8d08de1d32709266f8ef1a91a330ea5bb17da9bfbd1e0a0ee037f8f396d55
name: perl-Locale-Maketext-Fuzzy
arch: noarch
version: 0.11
epoch: 0
release: 34.fc44
summary: Maketext from already interpolated strings
url: https://metacpan.org/release/Locale-Maketext-Fuzzy
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-Maketext-Fuzzy-0.11-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-Maketext-Fuzzy-0.11-34.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a subclass of Locale::Maketext, with additional
  support for localizing messages that already contains interpolated
  variables.  This is most useful when the messages are returned by
  external modules -- for example, to match "dir: command not foundr"
  against "[_1]: command not found".


pkgId: 9f57c4142f846e8d1d734361c4a9b0bbb56ea465b6b0a863eaa50a1d61ad834d
name: perl-Locale-Maketext-Gettext
arch: noarch
version: 1.32
epoch: 0
release: 16.fc44
summary: Joins the gettext and Maketext frameworks
url: https://metacpan.org/release/Locale-Maketext-Gettext
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-Maketext-Gettext-1.32-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-Maketext-Gettext-1.32-16.fc44.noarch.rpm
checksum_type: sha256
description:
  Locale::Maketext::Gettext joins the GNU gettext and Maketext frameworks. It
  is a subclass of Locale::Maketext(3) that follows the way GNU gettext
  works. It works seamlessly, both in the sense of GNU gettext and Maketext.
  As a result, you enjoy both their advantages, and get rid of both their
  problems, too.


pkgId: 26580fe3a2aadf1dc642c27ecaf6f42d2440debc6d078a135e35419bf2381bc2
name: perl-Locale-Maketext-Gettext-tests
arch: noarch
version: 1.32
epoch: 0
release: 16.fc44
summary: Tests for perl-Locale-Maketext-Gettext
url: https://metacpan.org/release/Locale-Maketext-Gettext
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-Maketext-Gettext-1.32-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-Maketext-Gettext-tests-1.32-16.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Locale-Maketext-Gettext. Execute them
  with "/usr/libexec/perl-Locale-Maketext-Gettext/test".


pkgId: 0b35edf00e993031c5c8640f7b2185e6215db8263a4638477d125453b4a48522
name: perl-Locale-Maketext-Lexicon
arch: noarch
version: 1.00
epoch: 0
release: 37.fc44
summary: Extract translatable strings from source
url: https://metacpan.org/release/Locale-Maketext-Lexicon
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-Maketext-Lexicon-1.00-37.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-Maketext-Lexicon-1.00-37.fc44.noarch.rpm
checksum_type: sha256
description:
  Locale::Maketext::Lexicon provides lexicon-handling backends for
  Locale::Maketext to read from other localization formats, such as PO files,
  MO files, or from databases via the "Tie" interface.


pkgId: 2a096f1a57d3bd1734b8629effdf8fd487c179a2b0a8590e69ed1fe34ffa696a
name: perl-Locale-Maketext-Simple
arch: noarch
version: 0.21
epoch: 1
release: 522.fc44
summary: Simple interface to Locale::Maketext::Lexicon
url: https://www.perl.org/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-5.42.0-522.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-Maketext-Simple-0.21-522.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a simple wrapper around Locale::Maketext::Lexicon, designed
  to alleviate the need of creating Language Classes for module authors.


pkgId: 63028c97cedd691f96eb40a45470176c91a0d796583ed95502317f3eabb8196e
name: perl-Locale-Msgfmt
arch: noarch
version: 0.15
epoch: 0
release: 43.fc44
summary: Compile .po files to .mo files
url: https://metacpan.org/release/Locale-Msgfmt
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-Msgfmt-0.15-43.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-Msgfmt-0.15-43.fc44.noarch.rpm
checksum_type: sha256
description:
  This module does the same thing as msgfmt from GNU gettext-tools,
  except this is pure Perl. The interface is best explained through
  examples on home page.


pkgId: b5b3ffcb8a0caa413d997cc045f87bfa75f79a5ff6be6cab026eea9ea00ebf1b
name: perl-Locale-PO
arch: noarch
version: 0.27
epoch: 0
release: 31.fc44
summary: Perl module for manipulating .po entries from GNU gettext
url: https://metacpan.org/release/Locale-PO
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-PO-0.27-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-PO-0.27-31.fc44.noarch.rpm
checksum_type: sha256
description:
  This module simplifies management of GNU gettext .po files and is an
  alternative to using emacs po-mode. It provides an object-oriented
  interface in which each entry in a .po file is a Locale::PO object.


pkgId: 2948bcbe84b0c3f4b3f0ea085977d8b4621bda74505ab5c595edb3401f352cee
name: perl-Locale-SubCountry
arch: noarch
version: 2.07
epoch: 0
release: 13.fc44
summary: ISO 3166-2 two letter subcountry codes
url: https://metacpan.org/release/Locale-SubCountry
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-SubCountry-2.07-13.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-SubCountry-2.07-13.fc44.noarch.rpm
checksum_type: sha256
description:
  This module allows you to convert the full name for a countries administrative
  region to the code commonly used for postal addressing. The reverse look-up
  can also be done. Sub country codes are defined in "ISO 3166-2:2007, Codes for
  the representation of names of countries and their subdivisions".

  Sub countries are termed as states in the US and Australia, provinces in
  Canada and counties in the UK and Ireland.


pkgId: 5521d5c3a2b1308259a03ede898aee9ea8f7a81db57089b2ebe87ccd4112f5ce
name: perl-Locale-TextDomain-OO-Util
arch: noarch
version: 4.002
epoch: 0
release: 20.fc44
summary: Lexical Utils for Locale::TextDomain::OO
url: https://metacpan.org/release/Locale-TextDomain-OO-Util
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-TextDomain-OO-Util-4.002-20.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-TextDomain-OO-Util-4.002-20.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides methods for lexicon constants, to join and split
  lexicon keys and to extract the gettext file header.


pkgId: 65db6fe12f34bba5408fb524b8bd7dd2f87b576e2971a1f22958e48a36415cf7
name: perl-Locale-Utils-PlaceholderMaketext
arch: noarch
version: 1.005
epoch: 0
release: 25.fc44
summary: Utils to expand maketext placeholders
url: https://metacpan.org/release/Locale-Utils-PlaceholderMaketext
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Locale-Utils-PlaceholderMaketext-1.005-25.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-Utils-PlaceholderMaketext-1.005-25.fc44.noarch.rpm
checksum_type: sha256
description:
  Utils to transform text from maketext to gettext style and reverse. Utils
  to expand placeholders in maketext or gettext style.


pkgId: b2cf88a5d5379bc43daa029d712c6705921c02ec16a9e68a05373019dc2ebd7d
name: perl-Locale-gettext
arch: x86_64
version: 1.07
epoch: 0
release: 37.fc44
summary: Interface to gettext family of functions
url: https://metacpan.org/release/gettext
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-gettext-1.07-37.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Locale-gettext-1.07-37.fc44.x86_64.rpm
checksum_type: sha256
description:
  The gettext module permits access from perl to the gettext() family of
  functions for retrieving message strings from databases constructed to
  internationalize software.


pkgId: 667471f6eb5783977b0190883b44cf782728b50361ccd5b120a3ac0f53dfe1ed
name: perl-LockFile-Simple
arch: noarch
version: 0.208
epoch: 0
release: 35.fc44
summary: Simple file locking scheme
url: https://metacpan.org/release/LockFile-Simple
rpm_license: GPL-2.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.rdu3.fedoraproject.org
rpm_sourcerpm: perl-LockFile-Simple-0.208-35.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-LockFile-Simple-0.208-35.fc44.noarch.rpm
checksum_type: sha256
description:
  This simple locking scheme is not based on any file locking system calls
  such as flock() or lockf() but rather relies on basic file system
  primitives and properties, such as the atomicity of the write() system
  call. It is not meant to be exempt from all race conditions, especially
  over NFS.


pkgId: 5f09889dc2d738444985c1f9f6f05426616f0205be70a52d0e838e242de190c9
name: perl-Log-Agent
arch: noarch
version: 1.005
epoch: 0
release: 15.fc44
summary: Logging agent
url: https://metacpan.org/release/Log-Agent
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Agent-1.005-15.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Agent-1.005-15.fc44.noarch.rpm
checksum_type: sha256
description:
  The Log::Agent Perl module provides an abstract layer for logging and tracing,
  which is independent from the actual method used to physically perform those
  activities. It acts as an agent (hence the name) that collects the requests
  and delegates processing to a logging driver.


pkgId: 30fd6087ea81ace6ed91a8af0d8c74f9b0e17891f693bb2f4b0bcefa4671b1b4
name: perl-Log-Agent-mail
arch: noarch
version: 1.005
epoch: 0
release: 15.fc44
summary: E-mail driver for Log::Agent Perl logging framework
url: https://metacpan.org/release/Log-Agent
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Agent-1.005-15.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Agent-mail-1.005-15.fc44.noarch.rpm
checksum_type: sha256
description:
  This logging driver maps the log calls to email messages.  Each call generates
  a separate email message.


pkgId: d2b9b65694837b4110808edea4f4f2f58e05041c08713e406d6d4575e150e524
name: perl-Log-Any
arch: noarch
version: 1.718
epoch: 0
release: 2.fc44
summary: Bringing loggers and listeners together
url: https://metacpan.org/release/Log-Any
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Any-1.718-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Any-1.718-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Log::Any allows CPAN modules to safely and efficiently log messages, while
  letting the application choose (or decline to choose) a logging mechanism
  such as Log::Dispatch or Log::Log4perl.


pkgId: 3cd986ce8f33feb4ba8e520eb1cf3e8812bc51a05bb8d3a1a1937721961da190
name: perl-Log-Any-Adapter-Callback
arch: noarch
version: 0.102
epoch: 0
release: 7.fc44
summary: Send Log::Any logs to a subroutine
url: https://metacpan.org/release/Log-Any-Adapter-Callback
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-24.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Any-Adapter-Callback-0.102-7.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Any-Adapter-Callback-0.102-7.fc44.noarch.rpm
checksum_type: sha256
description:
  This adapter lets you specify callback subroutine to be called by
  Log::Any's logging methods (like $log->debug(), $log->error(), etc) and
  detection methods (like $log->is_warning(), $log->is_fatal(), etc.).


pkgId: 91c37e711b3d8afbb7d545990af81c5ad51e5df0b378f7853d10ceca41a9f909
name: perl-Log-Any-Adapter-Screen
arch: noarch
version: 0.141
epoch: 0
release: 5.fc44
summary: Send logs to screen, with colors and some other features
url: https://search.cpan.org/dist/Log-Any-Adapter-Screen/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Any-Adapter-Screen-0.141-5.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Any-Adapter-Screen-0.141-5.fc44.noarch.rpm
checksum_type: sha256
description:
  This Log::Any adapter prints log messages to screen (STDERR/STDOUT).  The
  messages are colored according to level (unless coloring is turned off).
  It has a few other features: allow passing formatter, allow setting level
  from some environment variables, add prefix/timestamps.


pkgId: 22d8c308321d091c0f6b5bf5c8d16d573e872cf3848c6af58824c78a57941865
name: perl-Log-Any-Adapter-TAP
arch: noarch
version: 0.003003
epoch: 0
release: 21.fc44
summary: Logging adapter suitable for use in TAP testcases
url: http://search.cpan.org/dist/Log-Any-Adapter-TAP/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Any-Adapter-TAP-0.003003-21.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Any-Adapter-TAP-0.003003-21.fc44.noarch.rpm
checksum_type: sha256
description:
  When running testcases, you probably want to see some of your logging
  output.  One sensible approach is to have all warn and more serious
  messages emitted as diag output on STDERR, and less serious messages
  emitted as note comments on STDOUT.


pkgId: c0b19471ddcae30d5a437df58daa4dd0d0f6579e9bf367d3856569659081459b
name: perl-Log-Any-IfLOG
arch: noarch
version: 0.09.0
epoch: 0
release: 21.fc44
summary: Load Log::Any only if "logging is enabled"
url: https://metacpan.org/release/Log-Any-IfLOG
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Any-IfLOG-0.09.0-21.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Any-IfLOG-0.09.0-21.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a drop-in replacement/wrapper for Log::Any to be used from
  your modules. This is a quick-hack solution to avoid the cost of loading
  Log::Any under "normal condition".


pkgId: 9b8e68b094b45f09e9c1a3c09329fb6a9af8b5d98eb51bc9c6f5d6b2554aa5ed
name: perl-Log-Contextual
arch: noarch
version: 0.009001
epoch: 0
release: 5.fc44
summary: Simple logging interface with a contextual log
url: https://metacpan.org/release/Log-Contextual
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Contextual-0.009001-5.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Contextual-0.009001-5.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a simple interface to extensible logging. It is bundled with
  a really basic logger, Log::Contextual::SimpleLogger, but in general you
  should use a real logger instead of that. For something more serious but
  not overly complicated, try Log::Dispatchouli.


pkgId: 6bcb5931fe6487bea1d280487d4588b8c8067fa85b193c7cf4a6f755da6d07ff
name: perl-Log-Dispatch
arch: noarch
version: 2.71
epoch: 0
release: 8.fc44
summary: Dispatches messages to one or more outputs
url: https://metacpan.org/release/Log-Dispatch
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-35.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Dispatch-2.71-8.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Dispatch-2.71-8.fc44.noarch.rpm
checksum_type: sha256
description:
  Log::Dispatch is a suite of OO modules for logging messages to
  multiple outputs, each of which can have a minimum and maximum log
  level.  It is designed to be easily subclassed, both for creating a
  new dispatcher object and particularly for creating new outputs.
  An Apache output is available in perl-Log-Dispatch-ApacheLog package.


pkgId: 36346666e0d8874097138377536ba071cf0d2b11c1b62c5e1ef3ea666ea4e2b1
name: perl-Log-Dispatch-ApacheLog
arch: noarch
version: 2.71
epoch: 0
release: 8.fc44
summary: Log::Dispatch output for logging to Apache::Log objects
url: https://metacpan.org/release/Log-Dispatch
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-35.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Dispatch-2.71-8.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Dispatch-ApacheLog-2.71-8.fc44.noarch.rpm
checksum_type: sha256
description:
  This Perl module enables you to pass messages to Apache's log object,
  represented by the Apache::Log class.


pkgId: 772d32701852b636d05ab630bef98cce33965c846b75b99984e8519f93d581a1
name: perl-Log-Dispatch-Array
arch: noarch
version: 1.005
epoch: 0
release: 9.fc44
summary: Log events to an array (reference)
url: https://metacpan.org/release/Log-Dispatch-Array
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Dispatch-Array-1.005-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Dispatch-Array-1.005-9.fc44.noarch.rpm
checksum_type: sha256
description:
  This provides a Log::Dispatch log output system that appends logged events
  to an array reference. This is probably only useful for testing the logging
  of your code.


pkgId: 0ae649a9da3f1852f0fd91954d2a97401ba211a0133ec0ba0b572bae697965bd
name: perl-Log-Dispatch-Config
arch: noarch
version: 1.04
epoch: 0
release: 40.fc44
summary: Log4j for Perl
url: https://metacpan.org/release/Log-Dispatch-Config
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Dispatch-Config-1.04-40.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Dispatch-Config-1.04-40.fc44.noarch.rpm
checksum_type: sha256
description:
  Log::Dispatch::Config is a subclass of Log::Dispatch and provides a way to
  configure Log::Dispatch object with configuration file (default, in AppConfig
  format).


pkgId: 0f5e07e530b5c9f028e6a9b2b9ce8b5547fd6ddd686183e01d8946a25e6d3c51
name: perl-Log-Dispatch-Configurator-Any
arch: noarch
version: 1.122640
epoch: 0
release: 36.fc44
summary: Configurator implementation with Config::Any
url: https://metacpan.org/release/Log-Dispatch-Configurator-Any
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Dispatch-Configurator-Any-1.122640-36.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Dispatch-Configurator-Any-1.122640-36.fc44.noarch.rpm
checksum_type: sha256
description:
  Log::Dispatch::Config is a wrapper for Log::Dispatch and provides a way to
  configure Log::Dispatch objects with configuration files. Somewhat like a lite
  version of log4j and Log::Log4perl it allows multiple log destinations. The
  standard configuration file format for Log::Dispatch::Config is AppConfig.


pkgId: 0a68bb474fbf3a550b0260952a721b5b4703783d53d8b125b206a7e65296a285
name: perl-Log-Dispatch-FileRotate
arch: noarch
version: 1.38
epoch: 0
release: 13.fc44
summary: Log to files that archive/rotate themselves
url: https://metacpan.org/release/Log-Dispatch-FileRotate
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Dispatch-FileRotate-1.38-13.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Dispatch-FileRotate-1.38-13.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a simple object for logging to files under the
  Log::Dispatch::* system, and automatically rotating them according to
  different constraints. This is basically a Log::Dispatch::File wrapper
  with additions.


pkgId: d9738771b369e524c8cf537e762fda72fb41c416263ae987ac8e72699dff3a11
name: perl-Log-Dispatch-Perl
arch: noarch
version: 0.05
epoch: 0
release: 18.fc44
summary: Use core Perl functions for logging
url: https://metacpan.org/release/Log-Dispatch-Perl
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Dispatch-Perl-0.05-18.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Dispatch-Perl-0.05-18.fc44.noarch.rpm
checksum_type: sha256
description:
  The "Log::Dispatch::Perl" module offers a logging alternative using
  standard Perl core functions. It allows you to fall back to the common Perl
  alternatives for logging, such as "warn" and "cluck". It also adds the
  possibility for a logging action to halt the current environment, such as
  with "die" and "croak".


pkgId: 768e585aa66d396f40cc7bdce94575b226271ed0467d2989c219501c0e017767
name: perl-Log-Dispatchouli
arch: noarch
version: 3.013
epoch: 0
release: 2.fc44
summary: Simple wrapper around Log::Dispatch
url: https://metacpan.org/release/Log-Dispatchouli
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-36.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Dispatchouli-3.013-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Dispatchouli-3.013-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Log::Dispatchouli is a thin layer above Log::Dispatch and meant to make it
  dead simple to add logging to a program without having to think much about
  categories, facilities, levels, or things like that. It is meant to make
  logging just configurable enough that you can find the logs you want and
  just easy enough that you will actually log things.


pkgId: f5b55a8845c55ce936dbf8e87a5d8c403ad967d95c04777917fd85bbe18dbfac
name: perl-Log-Handler
arch: noarch
version: 0.90
epoch: 0
release: 16.fc44
summary: Log messages to several outputs
url: https://metacpan.org/release/Log-Handler
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-19.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Handler-0.90-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Handler-0.90-16.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a object oriented handler for logging, tracing and debugging.
  It is very easy to use and provides a simple interface for multiple output
  objects with lots of configuration parameters. You can easily filter the
  amount of logged information on a per-output base, define priorities, create
  patterns to format the messages and reload the complete logging machine.


pkgId: 82b699621f013f7a1fc95f0d3385a40931ef0c64ecd1dd8da40679d6f14c1916
name: perl-Log-Log4perl
arch: noarch
version: 1.57
epoch: 0
release: 9.fc44
summary: Log4j implementation for Perl
url: https://metacpan.org/release/Log-Log4perl
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Log4perl-1.57-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Log4perl-1.57-9.fc44.noarch.rpm
checksum_type: sha256
description:
  Log::Log4perl lets you remote-control and fine-tune the logging
  behavior of your system from the outside. It implements the widely
  popular (Java-based) Log4j logging package in pure Perl.

  To log into RRD database, install perl-Log-Log4perl-Appender-RRDs package.
  To log into a database via DBI, install perl-Log-Log4perl-Appender-DBI package.

  To read log4j XML configuration files, install
  perl-Log-Log4perl-Config-DOMConfigurator package.


pkgId: 8d88b52b581ebf4d452ab3a781f05d14b37921030743f2a06911eaa72d4867a5
name: perl-Log-Log4perl-Appender-DBI
arch: noarch
version: 1.57
epoch: 0
release: 9.fc44
summary: Log to a database
url: https://metacpan.org/release/Log-Log4perl
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Log4perl-1.57-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Log4perl-Appender-DBI-1.57-9.fc44.noarch.rpm
checksum_type: sha256
description:
  Log::Log4perl::Appender::DBI appender facilitates writing data to a database
  using DBI interface via Log4perl.


pkgId: edf3cd401b003b8d106813e470e11dde428cb36c8af9b0690123194cde69376c
name: perl-Log-Log4perl-Appender-RRDs
arch: noarch
version: 1.57
epoch: 0
release: 9.fc44
summary: Log to a RRDtool archive
url: https://metacpan.org/release/Log-Log4perl
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Log4perl-1.57-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Log4perl-Appender-RRDs-1.57-9.fc44.noarch.rpm
checksum_type: sha256
description:
  Log::Log4perl::Appender::RRDs appender facilitates writing data to
  RRDtool round-robin archives via Log4perl.


pkgId: d0559e7920ad98159124d077b4707b5fd42361f37bbac641d7ab1677d2e2ea44
name: perl-Log-Log4perl-Appender-Socket-UNIX
arch: noarch
version: 1.04
epoch: 0
release: 34.fc44
summary: Log4perl appender for writing to UNIX domain sockets
url: https://metacpan.org/release/Log-Log4perl-Appender-Socket-UNIX
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Log4perl-Appender-Socket-UNIX-1.04-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Log4perl-Appender-Socket-UNIX-1.04-34.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a simple appender for writing to a unix domain socket. It relies on
  Socket and only logs to an existing socket.


pkgId: aee49562146b89d544ac6e43b8e33b5a9ed905111ef366fc218f4c5b166820c0
name: perl-Log-Log4perl-Appender-Socket-UNIX-tests
arch: noarch
version: 1.04
epoch: 0
release: 34.fc44
summary: Tests for perl-Log-Log4perl-Appender-Socket-UNIX
url: https://metacpan.org/release/Log-Log4perl-Appender-Socket-UNIX
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Log4perl-Appender-Socket-UNIX-1.04-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Log4perl-Appender-Socket-UNIX-tests-1.04-34.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Log-Log4perl-Appender-Socket-UNIX. Execute them
  with "/usr/libexec/perl-Log-Log4perl-Appender-Socket-UNIX/test".


pkgId: a33ecf543c405578c5ca37b036ca230af6a025654de7eecc9f5c6353a33d5eb6
name: perl-Log-Log4perl-Config-DOMConfigurator
arch: noarch
version: 1.57
epoch: 0
release: 9.fc44
summary: Read log4j XML configuration files
url: https://metacpan.org/release/Log-Log4perl
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Log4perl-1.57-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Log4perl-Config-DOMConfigurator-1.57-9.fc44.noarch.rpm
checksum_type: sha256
description:
  Log::Log4perl::Config::DOMConfigurator adds support for log4j XML
  configuration files to Log::Log4perl Perl logging system.


pkgId: 40a0f66350854ae5cf4d19f639d982b2b6e270c5d4fc24fc3bc0c5725e68db4e
name: perl-Log-Message
arch: noarch
version: 0.08
epoch: 1
release: 38.fc44
summary: Generic message storing mechanism
url: https://metacpan.org/release/Log-Message
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Message-0.08-38.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Message-0.08-38.fc44.noarch.rpm
checksum_type: sha256
description:
  This package enables you to do generic message logging throughout programs and
  projects. Every message will be logged with stack traces, time stamps and so
  on.  You can use built-in handlers immediately, or after the fact when you
  inspect the error stack. It is highly configurable and let's you even provide
  your own handlers for dealing with messages.


pkgId: 4d12af0cab5b8806f5f8aea7b233df0f9c454ca929aeb9f49d2efe5890ccc1cc
name: perl-Log-Message-Simple
arch: noarch
version: 0.10
epoch: 0
release: 325.fc44
summary: Simplified interface to Log::Message
url: https://metacpan.org/release/Log-Message-Simple
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Message-Simple-0.10-325.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Message-Simple-0.10-325.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a simplified front-end to Log::Message, offering
  most common use for logging, and easy access to the stack (in both
  raw and pretty-printable form).


pkgId: b0e8687f85069e9286a6ca2bd7cead597225db213515c9871a86f2e83209621f
name: perl-Log-Report
arch: noarch
version: 1.44
epoch: 0
release: 2.fc44
summary: Report a problem with exceptions and translation support
url: https://metacpan.org/release/Log-Report
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Report-1.44-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Report-1.44-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Handling messages directed to users can be a hassle, certainly when the same
  software is used for command-line and in a graphical interfaces (you may not
  know how it is used), or has to cope with internationalization; these modules
  try to simplify this.


pkgId: 941fa7f89a1f555c1bc1ef2b18883ef891a780e82f0a26d798af4c9e993bb6ad
name: perl-Log-Report-Mojo
arch: noarch
version: 1.44
epoch: 0
release: 2.fc44
summary: Divert log messages into Log::Report
url: https://metacpan.org/release/Log-Report
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Report-1.44-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Report-Mojo-1.44-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Mojo likes to log messages directly into a file, by default. This is a Mojo
  extension that can route Mojo messages into Log::Report logging framework.


pkgId: d464f9a6e03c969e902104cc6081cb8094f4ab0658358e53c7df19bb46a156a5
name: perl-Log-Report-Optional
arch: noarch
version: 1.08
epoch: 0
release: 2.fc44
summary: Base class for large Log::Report and simple Log::Report::Minimal
url: https://metacpan.org/release/Log-Report-Optional
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-05.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Report-Optional-1.08-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Report-Optional-1.08-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This module will allow libraries (helper modules) to have a dependency to a
  small module instead of the full Log-Report distribution. The full power of
  Log::Report is only released when the main program uses that module. In
  that case, the module using the 'Optional' will also use the full
  Log::Report, otherwise the dressed-down Log::Report::Minimal version.


pkgId: bdfd8e89041a9e235640c4f0d69f42e6b60c2b6204b9c13077e57b81820b4366
name: perl-Log-Report-Optional-tests
arch: noarch
version: 1.08
epoch: 0
release: 2.fc44
summary: Tests for perl-Log-Report-Optional
url: https://metacpan.org/release/Log-Report-Optional
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-05.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Report-Optional-1.08-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Report-Optional-tests-1.08-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Log-Report-Optional. Execute them
  with "/usr/libexec/perl-Log-Report-Optional/test".


pkgId: 75dba788afb039fd34059107b6050055b34d2b86df588372dfaf18616de30a9c
name: perl-Log-Report-Template
arch: noarch
version: 1.04
epoch: 0
release: 1.fc44
summary: Template Toolkit with translations
url: https://metacpan.org/dist/Log-Report-Template
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-34.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Report-Template-1.04-1.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Report-Template-1.04-1.fc44.noarch.rpm
checksum_type: sha256
description:
  This module extends Template, which is the core of Template Toolkit. The main
  addition is support for translations via the translation framework offered by
  Log::Report.


pkgId: 20d86ea343bb3cc929544ce76db8c12229ba16e8a9a8a5b03740618fbd7a557a
name: perl-Log-Report-Template-tests
arch: noarch
version: 1.04
epoch: 0
release: 1.fc44
summary: Tests for perl-Log-Report-Template
url: https://metacpan.org/dist/Log-Report-Template
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-34.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Report-Template-1.04-1.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Report-Template-tests-1.04-1.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Log-Report-Template. Execute them
  with "/usr/libexec/perl-Log-Report-Template/test".


pkgId: 9700944416e3cbd8eb21346ec6797c2f4d2976373c178899168013b23dbd24f2
name: perl-Log-Trace
arch: noarch
version: 1.070
epoch: 0
release: 48.fc44
summary: A unified approach to tracing
url: https://metacpan.org/release/Log-Trace
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-Trace-1.070-48.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-Trace-1.070-48.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a unified approach to tracing. A script can 'use
  Log::Trace qw( < mode > )' to set the behaviour of the TRACE function.By
  default, the trace functions are exported to the calling package only.
  You can export the trace functions to other packages with the 'Deep'
  option. See the "OPTIONS" manpage for more information.


pkgId: 9d2a1d4be8a6af5f5dcdb09669a7a0f98dc194cd9356e68f7d92ca69d80b7720
name: perl-Log-TraceMessages
arch: noarch
version: 1.4
epoch: 0
release: 50.fc44
summary: Perl extension for trace messages used in debugging
url: https://metacpan.org/release/Log-TraceMessages
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Log-TraceMessages-1.4-50.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Log-TraceMessages-1.4-50.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a better way of putting 'hello there' trace messages in
  your code.  It lets you turn tracing on and off without commenting out
  trace statements, and provides other useful things like HTML-ified
  trace messages for CGI scripts and an easy way to trace out data
  structures using Data::Dumper.


pkgId: 5f03ab9af5fb0921825839c3a562bd8f7660114e9a63f946cbac9f4cf9a178b6
name: perl-Long-Jump
arch: noarch
version: 0.000003
epoch: 0
release: 5.fc44
summary: Mechanism for returning to a specific point from a deeply nested stack
url: https://metacpan.org/release/Long-Jump
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Long-Jump-0.000003-5.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Long-Jump-0.000003-5.fc44.noarch.rpm
checksum_type: sha256
description:
  This Perl module essentially provides a multi-level return. You can mark
  a spot with setjump() and then unwind the stack back to that point from any
  nested stack frame by name using longjump(). You can also provide a list of
  return values. It is safer than C language jump in that it only lets you
  escape frames by going up the stack, you cannot jump in other ways.


pkgId: e15f7d0e37c52b5a9cce26f5a1aaada0f77aff74d460b193f0ad982d016057bd
name: perl-Lua-API
arch: x86_64
version: 0.04
epoch: 0
release: 12.fc44
summary: Interface to Lua's embedding API
url: https://metacpan.org/release/Lua-API
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lua-API-0.04-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lua-API-0.04-12.fc44.x86_64.rpm
checksum_type: sha256
description:
  Lua is a simple, expressive, extension programming language that is easily
  embeddable. Lua::API provides Perl bindings to Lua's C-based embedding
  API. It allows Perl routines to be called from Lua as if they were written
  in C, and allows Perl routines to directly manipulate the Lua interpreter
  and its environment. It presents a very low-level interface (essentially
  equivalent to the C interface), so is aimed at developers who need that
  sort of access.


pkgId: 5f22021bfe23818718f64acf6260be0a905c3236e3117688264fbe9c299a6969
name: perl-Lucy
arch: x86_64
version: 0.6.2
epoch: 0
release: 27.fc44
summary: Search engine library
url: https://metacpan.org/release/Lucy
rpm_license: Apache-2.0 AND MIT AND Unicode-DFS-2015
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Lucy-0.6.2-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Lucy-0.6.2-27.fc44.x86_64.rpm
checksum_type: sha256
description:
  Lucy is a loose port of the Java search engine library Apache Lucene,
  written in Perl and C. The archetypal application is website search, but it
  can be put to many different uses.


pkgId: 8453a8e1cb448fae3925ed1513351aa8194b344f915cc0c721966b660cb618aa
name: perl-MCE
arch: noarch
version: 1.902
epoch: 0
release: 2.fc44
summary: Many-core Engine for Perl providing parallel processing capabilities
url: https://metacpan.org/release/MCE
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MCE-1.902-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MCE-1.902-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Many-core Engine (MCE) for Perl helps enable a new level of performance by
  maximizing all available cores. MCE spawns a pool of workers and therefore
  does not fork a new process per each element of data. Instead, MCE follows
  a bank queuing model. Imagine the line being the data and bank-tellers the
  parallel workers. MCE enhances that model by adding the ability to chunk
  the next n elements from the input stream to the next available worker.


pkgId: 8d036e79c1318eba6e360491259e5f1b30271592c20eb2f4b0a15b2063137766
name: perl-MCE-Shared
arch: noarch
version: 1.893
epoch: 0
release: 4.fc44
summary: MCE extension for sharing data, supporting threads and processes
url: https://metacpan.org/release/MCE-Shared
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MCE-Shared-1.893-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MCE-Shared-1.893-4.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides data sharing capabilities for MCE, supporting threads and
  processes. MCE::Hobo provides threads-like parallelization for running code
  asynchronously.


pkgId: a1f280fe8009da091d65ec101161b987489bc374d4a8a55d746a93b644a62af9
name: perl-MCE-tools
arch: noarch
version: 1.902
epoch: 0
release: 2.fc44
summary: Many-core Engine command line tools
url: https://metacpan.org/release/MCE
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MCE-1.902-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MCE-tools-1.902-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This package delivers command line tools like mce_grep(1) that utilize
  the Many-core Engine (MCE) Perl library.


pkgId: 5618e2fe5689091b6ff8561005f93a4451d000aa6eaed01d84cf708bd7913692
name: perl-MD5
arch: noarch
version: 2.03
epoch: 0
release: 50.fc44
summary: Perl interface to the MD5 Message-Digest Algorithm
url: https://metacpan.org/release/MD5
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MD5-2.03-50.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MD5-2.03-50.fc44.noarch.rpm
checksum_type: sha256
description:
  This module (MD5.pm) is just a thin wrapper around the Digest::MD5
  module.  It is provided so that legacy code that rely on the old
  interface continue to work with the speed benefit of the new module.


pkgId: 61f0cba14c61750a21bfc0b27f413ff4cd0d23ebce3ff9c2c7d877944c120a3b
name: perl-MDV-Packdrakeng
arch: noarch
version: 1.13
epoch: 0
release: 41.fc44
summary: Simple Archive Extractor/Builder
url: https://metacpan.org/release/MDV-Packdrakeng
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MDV-Packdrakeng-1.13-41.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MDV-Packdrakeng-1.13-41.fc44.noarch.rpm
checksum_type: sha256
description:
  MDV::Packdrakeng is a simple indexed archive builder and extractor using
  standard compression methods.


pkgId: 6b82edd40984de53b92dfcc4994f15162563120a26f03e66c6f2bf6cf6da36af
name: perl-MIME-Base64
arch: x86_64
version: 3.16
epoch: 0
release: 521.fc44
summary: Encoding and decoding of Base64 and quoted-printable strings
url: https://metacpan.org/release/MIME-Base64
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND metamail
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MIME-Base64-3.16-521.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MIME-Base64-3.16-521.fc44.x86_64.rpm
checksum_type: sha256
description:
  This package contains a Base64 encoder/decoder and a quoted-printable
  encoder/decoder. These encoding methods are specified in RFC 2045 - MIME
  (Multipurpose Internet Mail Extensions).


pkgId: c56e378701f35dcd57122b95d99d66134d1516f46c4c82b3709a989dbc3242d9
name: perl-MIME-EncWords
arch: noarch
version: 1.015.0
epoch: 0
release: 5.fc44
summary: Deal with RFC 2047 encoded words (improved)
url: https://metacpan.org/release/MIME-EncWords
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MIME-EncWords-1.015.0-5.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MIME-EncWords-1.015.0-5.fc44.noarch.rpm
checksum_type: sha256
description:
  MIME::EncWords is aimed to be another implementation of MIME::Words so that it
  will achieve more exact conformance with RFC 2047 (former RFC 1522)
  specifications. Additionally, it contains some improvements. Following synopsis
  and descriptions are inherited from its inspirer, then added descriptions on
  improvements (**) or changes and clarifications (*).


pkgId: e8611f70a9200f53264601d9396a1b3b1e6894dcbd839dcb89c7756b4a58b87d
name: perl-MIME-Lite
arch: noarch
version: 3.035
epoch: 0
release: 4.fc44
summary: MIME::Lite - low-calorie MIME generator
url: https://metacpan.org/release/MIME-Lite
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-16.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MIME-Lite-3.035-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MIME-Lite-3.035-4.fc44.noarch.rpm
checksum_type: sha256
description:
  MIME::Lite is intended as a simple, standalone module for generating (not
  parsing!) MIME messages... Specifically, it allows you to output a simple,
  decent single- or multi-part message with text or binary attachments.  It does
  not require that you have the Mail:: or MIME:: modules installed.


pkgId: d11784517c2afeb6d51a9c9a26e1f963ed8fb83102b872fe546933803b2e8c25
name: perl-MIME-Lite-HTML
arch: noarch
version: 1.24
epoch: 0
release: 42.fc44
summary: Provide routine to transform a HTML page in a MIME-Lite mail
url: https://metacpan.org/release/MIME-Lite-HTML
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MIME-Lite-HTML-1.24-42.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MIME-Lite-HTML-1.24-42.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a Perl mail client interface for sending message that
  support HTML format and build them for you.. This module provides routine to
  transform an HTML page in a MIME::Lite mail. So you need this module to use
  MIME-Lite-HTML possibilities.


pkgId: ae6ba11d3ffdaa4cb22b4a3429ce859cff43b4ac2121c5efcc67be946cffc9b0
name: perl-MIME-Types
arch: noarch
version: 2.30
epoch: 0
release: 2.fc44
summary: MIME types module for Perl
url: https://metacpan.org/release/MIME-Types
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MIME-Types-2.30-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MIME-Types-2.30-2.fc44.noarch.rpm
checksum_type: sha256
description:
  MIME types are used in many applications, for instance as part of e-mail
  and HTTP traffic, to indicate the type of content that is transmitted.

  Sometimes detailed knowledge about a mime-type is need; however, this
  module only knows about the file-name extensions that relate to some
  file-type.  It can also be used to produce the right format: types that
  are not registered at IANA need to use 'x-' prefixes.


pkgId: 28edb7601500abe01819d61d39bc06ad8c7ce97b43dcdc377b43fd1f9b565c28
name: perl-MIME-tools
arch: noarch
version: 5.517
epoch: 0
release: 1.fc44
summary: Modules for parsing and creating MIME entities in Perl
url: https://metacpan.org/release/MIME-tools
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-03.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MIME-tools-5.517-1.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MIME-tools-5.517-1.fc44.noarch.rpm
checksum_type: sha256
description:
  MIME-tools - modules for parsing (and creating!) MIME entities. Modules in this
  toolkit: Abstract message holder (file, scalar, etc.), OO interface for
  decoding MIME messages, an extracted and decoded MIME entity, Mail::Field
  subclasses for parsing fields, a parsed MIME header (Mail::Header subclass),
  parser and tool for building your own MIME parser, and utilities.


pkgId: db29b8ef98459111b6ca7ac6179dd51b4e140af241b799e40cf9f05053d68756
name: perl-MLDBM
arch: noarch
version: 2.05
epoch: 0
release: 37.fc44
summary: Store multi-level hash structure in single level tied hash
url: https://metacpan.org/release/MLDBM
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MLDBM-2.05-37.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MLDBM-2.05-37.fc44.noarch.rpm
checksum_type: sha256
description:
  This module can serve as a transparent interface to any TIEHASH package that is
  required to store arbitrary perl data, including nested references. Thus, this
  module can be used for storing references and other arbitrary data within DBM
  databases.


pkgId: 33b4f2520ca026af26e81ca211227260003297a79a4693c91ae2f58e5bc5fdf6
name: perl-MRO-Compat
arch: noarch
version: 0.15
epoch: 0
release: 13.fc44
summary: Mro::* interface compatibility for Perls < 5.9.5
url: https://metacpan.org/release/MRO-Compat
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MRO-Compat-0.15-13.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MRO-Compat-0.15-13.fc44.noarch.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing with method
  resolution order and method caching in general in Perl 5.9.5 and higher.
  This module provides those interfaces for earlier versions of Perl (back
  to 5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+. That is to say,
  code which properly uses MRO::Compat will work unmodified on both older
  Perls and 5.9.5+.

  If you're writing a piece of software that would like to use the parts
  of 5.9.5+'s mro:: interfaces that are supported here, and you want
  compatibility with older Perls, this is the module for you.


pkgId: 61b4fa01a13888b7417d8e0f995acdb49e9bab54f994eb5e8f7dccd945242d39
name: perl-Mail-Alias
arch: noarch
version: 1.15
epoch: 0
release: 12.fc44
summary: Module for manipulating e-mail alias files
url: https://metacpan.org/release/Mail-Alias
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Alias-1.15-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Alias-1.15-12.fc44.noarch.rpm
checksum_type: sha256
description:
  This module allows direct manipulation of various types of E-Mail
  Alias files. The primary use of Mail::Alias is for manipulating alias
  files in the SENDMAIL alias file format. Additionally it is possible
  to read some other formats and to convert between various alias file
  formats.


pkgId: 6c9c33402b0c3448bf67bde5c7ae5cfd20e7243396fdf6f991a1a592b720e8c5
name: perl-Mail-Audit
arch: noarch
version: 2.228
epoch: 0
release: 7.fc44
summary: Library for creating easy mail filters
url: https://metacpan.org/dist/Mail-Audit
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Audit-2.228-7.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Audit-2.228-7.fc44.noarch.rpm
checksum_type: sha256
description:
  Mail::Audit was inspired by Tom Christiansen's audit_mail and deliverlib
  programs. It allows a piece of email to be logged, examined, accepted into
  a mailbox, filtered, resent elsewhere, rejected, replied to, and so on. It's
  designed to allow you to easily create filter programs to stick in a .forward
  file or similar.


pkgId: 0624a33edc4f88bb5cff8040799ce7c07c3e8e649844a10585923575c713e2be
name: perl-Mail-Audit-List
arch: noarch
version: 1.853
epoch: 0
release: 4.fc44
summary: Mail::Audit plugin for automatic list delivery
url: https://metacpan.org/dist/Mail-Audit-List
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Audit-List-1.853-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Audit-List-1.853-4.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a Mail::Audit plugin which provides a method for automatically
  delivering mailing lists to a suitable mainbox. It requires the CPAN
  Mail::ListDetector module.


pkgId: edbb87a43d94010f20fcd13523451c3345078e0d8d9b25e1771cfd31a27de00f
name: perl-Mail-Box
arch: noarch
version: 4.01
epoch: 0
release: 2.fc44
summary: Manage a mailbox, a folder with messages
url: https://metacpan.org/release/Mail-Box
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Box-4.01-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Box-4.01-2.fc44.noarch.rpm
checksum_type: sha256
description:
  The Mail::Box folder is a modern mail-folder manager -- at least at
  the moment of this writing ;)  It is written to replace Mail::Folder,
  although its interface is different.


pkgId: c94573fbfcbde7173c0ef985e719fea759c83f95a6e277f1845aca519f4af2a4
name: perl-Mail-Box-IMAP4
arch: noarch
version: 4.01
epoch: 0
release: 2.fc44
summary: Handle IMAP4 folders as client
url: https://metacpan.org/release/Mail-Box-IMAP4
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Box-IMAP4-4.01-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Box-IMAP4-4.01-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Maintain a folder which has its messages stored on a remote server. The
  communication between the client application and the server is implemented
  using the IMAP4 protocol.


pkgId: 0993f59be1fdf04d45da0b4c031eaa2a1426465d65c068b9ac582018d6dacaaf
name: perl-Mail-Box-POP3
arch: noarch
version: 3.008
epoch: 0
release: 3.fc44
summary: Handle POP3 folders as client
url: https://metacpan.org/release/Mail-Box-POP3
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Box-POP3-3.008-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Box-POP3-3.008-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Maintain a folder which has its messages stored on a remote server. The
  communication between the client application and the server is implemented
  using the POP3 protocol. This class uses Mail::Transport::POP3 to hide the
  transport of information, and focuses solely on the correct handling of
  messages within a POP3 folder.


pkgId: b7d75ce074f60943888529193c87995dd0f1e328a38b64dc3b5dc3bf84ac2bf7
name: perl-Mail-DKIM
arch: noarch
version: 1.20240923
epoch: 0
release: 4.fc44
summary: Sign and verify Internet mail with DKIM/DomainKey signatures
url: http://dkimproxy.sourceforge.net/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-DKIM-1.20240923-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-DKIM-1.20240923-4.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements the various components of the DKIM and DomainKeys
  message-signing and verifying standards for Internet mail. It currently
  tries to implement RFC4871 (for DKIM) and RFC4870 (DomainKeys).

  It is required if you wish to enable DKIM checking in SpamAssassin via the
  Mail::SpamAssassin::Plugin::DKIM plugin.


pkgId: 2316359620e846546fe7542a380eb60e9a85c2742ea75ad2b08134b72346dab1
name: perl-Mail-DMARC-HTTP
arch: noarch
version: 1.20250805
epoch: 0
release: 2.fc44
summary: Web server for DMARC validation and report viewing
url: https://metacpan.org/dist/Mail-DMARC
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-DMARC-1.20250805-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-DMARC-HTTP-1.20250805-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Mail::DMARC::HTTP Perl module and dmarc_httpd tool for viewing DMARC reports.
  This package is has intentionally left out jqgrid JavaScript and CSS files
  because of missing their source code.


pkgId: 772d147cda2f76bbcb910b79c04f009d891f346db392a6965529b37b2f9c40fc
name: perl-Mail-DMARC-Test
arch: noarch
version: 1.20250805
epoch: 0
release: 2.fc44
summary: Perl modules for testing Mail::DMARC framework
url: https://metacpan.org/dist/Mail-DMARC
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-DMARC-1.20250805-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-DMARC-Test-1.20250805-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Public Perl modules of Mail::DMARC framework which have no other use than
  performing internal tests.


pkgId: 789bbb864be739d4f76aec8f57f7df44ee09af4e923c73fccbe41345128f5fdf
name: perl-Mail-IMAPClient
arch: noarch
version: 3.43
epoch: 0
release: 15.fc44
summary: An IMAP Client API
url: https://metacpan.org/release/Mail-IMAPClient
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-IMAPClient-3.43-15.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-IMAPClient-3.43-15.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides perl routines that simplify a sockets connection
  to and an IMAP conversation with an IMAP server.


pkgId: fa1733965f6625508abd95e41a84482725307d3e47a767dd96720de4d7301978
name: perl-Mail-IMAPTalk
arch: noarch
version: 4.07
epoch: 0
release: 2.fc44
summary: IMAP client interface with lots of features
url: https://metacpan.org/release/Mail-IMAPTalk
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-IMAPTalk-4.07-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-IMAPTalk-4.07-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This Perl module communicates with an IMAP server. Each IMAP server command is
  mapped to a method of this object.


pkgId: 66dd80382d452cd10e9345917a41cf91ca1b4b29842534fc80bde31bb5f9a706
name: perl-Mail-JMAPTalk
arch: noarch
version: 0.17
epoch: 0
release: 3.fc44
summary: Perl client for JMAP protocol
url: https://metacpan.org/release/Mail-JMAPTalk
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-JMAPTalk-0.17-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-JMAPTalk-0.17-3.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a really basic wrapper around the JMAP protocol <http://jmap.io/>. It
  has a rudimentary "Login" command as well, but it doesn't support the entire
  protocol yet.


pkgId: 627e2aeb57da8a66da254f8ee70f8f6e8b7aac37ae271020ad62abc4e02d3abf
name: perl-Mail-ListDetector
arch: noarch
version: 1.04
epoch: 0
release: 6.fc44
summary: Perl extension for detecting mailing list messages
url: https://metacpan.org/dist/Mail-ListDetector
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-36.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-ListDetector-1.04-6.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-ListDetector-1.04-6.fc44.noarch.rpm
checksum_type: sha256
description:
  This module analyzes mail objects in any of the classes handled by
  Email::Abstract. It returns a Mail::ListDetector::List object representing
  the mailing list.


pkgId: f0877c193b6895f55fe5657a347cee09569a4b3f4ab8ddc89f006fce2ecc3079
name: perl-Mail-Mbox-MessageParser
arch: noarch
version: 1.5111
epoch: 0
release: 23.fc44
summary: A fast and simple mbox folder reader
url: https://metacpan.org/release/Mail-Mbox-MessageParser
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Mbox-MessageParser-1.5111-23.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Mbox-MessageParser-1.5111-23.fc44.noarch.rpm
checksum_type: sha256
description:
  Mail::Mbox::MessageParser is a feature-poor but very fast mbox parser. It uses
  the best of three strategies for parsing a mailbox: either using cached folder
  information, GNU grep, or highly optimized Perl.


pkgId: ecba78fedaaf740754c134ce6438aad3aeef4f34bedc84b4e06a80648cc2c2b7
name: perl-Mail-MboxParser
arch: noarch
version: 0.55
epoch: 0
release: 45.fc44
summary: Read-only access to UNIX-mailboxes
url: https://metacpan.org/release/Mail-MboxParser
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-MboxParser-0.55-45.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-MboxParser-0.55-45.fc44.noarch.rpm
checksum_type: sha256
description:
  This module attempts to provide a simplified access to standard UNIX-
  mailboxes. It offers only a subset of methods to get 'straight to the
  point'. More sophisticated things can still be done by invoking any method
  from MIME::Tools on the appropriate return values.


pkgId: 69b353c78dcfd108251bc9de3a9ffd445a28583e077adbc242bed62352563e15
name: perl-Mail-POP3Client
arch: noarch
version: 2.21
epoch: 0
release: 12.fc44
summary: Perl 5 module to talk to a POP3 (RFC1939) server
url: https://metacpan.org/release/Mail-POP3Client
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-POP3Client-2.21-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-POP3Client-2.21-12.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements an Object-Oriented interface to a POP3 server. It
  implements RFC1939 (http://www.faqs.org/rfcs/rfc1939.html)


pkgId: 7ab7b148aeea856881ddbb18c802271969f81c4fb7fee5e1a4f6f7c065eec6d6
name: perl-Mail-Procmail
arch: noarch
version: 1.08
epoch: 0
release: 39.fc44
summary: Procmail-like facility for creating easy mail filters
url: https://metacpan.org/release/Mail-Procmail
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Procmail-1.08-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Procmail-1.08-39.fc44.noarch.rpm
checksum_type: sha256
description:
  procmail is a great mail filter program, but it has weird recipe
  format. It's pattern matching capabilities are basic and often
  insufficient. This module provides flexibility to filter your
  mail using the power of Perl.


pkgId: 96474197af915f421b5e3bae1879145b93eb330de777b4983bb8afbd9ab90171
name: perl-Mail-RFC822-Address
arch: noarch
version: 0.3
epoch: 0
release: 47.fc44
summary: Perl extension for validating email addresses according to RFC822
url: https://metacpan.org/release/Mail-RFC822-Address
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-RFC822-Address-0.3-47.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-RFC822-Address-0.3-47.fc44.noarch.rpm
checksum_type: sha256
description:
  Mail::RFC822::Address validates email addresses against the grammar
  described in RFC 822 using regular expressions. The only sure way to see
  if a supplied email address is genuine is to send an email to it and see
  if the user recieves it. This package only checks that the email address
  is syntactically valid.


pkgId: 01f0cad45359bae7090b664ea86117e911d3f48cf4dc5610296abe8ab710f29d
name: perl-Mail-SPF
arch: noarch
version: 3.20250505
epoch: 0
release: 3.fc44
summary: Object-oriented implementation of Sender Policy Framework
url: https://metacpan.org/release/Mail-SPF
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-SPF-3.20250505-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-SPF-3.20250505-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Mail::SPF is an object-oriented implementation of Sender Policy Framework
  (SPF). See http://www.openspf.org for more information about SPF.


pkgId: 6b850e7e3293e1cebd8a9b7104e264d11a6c70e924eb418e3aaebeb13275581c
name: perl-Mail-SPF-Iterator
arch: noarch
version: 1.121
epoch: 0
release: 4.fc44
summary: Iterative SPF lookup
url: https://metacpan.org/release/Mail-SPF-Iterator
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-SPF-Iterator-1.121-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-SPF-Iterator-1.121-4.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides an iterative resolving of SPF records. Contrary to
  Mail::SPF, which does blocking DNS lookups, this module just returns the
  DNS queries and later expects the responses.


pkgId: 49f7d30abfd594716220a8b2a88fe29dd1b35f5e7afc2b3a89a964fef72519bd
name: perl-Mail-SPF_XS
arch: x86_64
version: 1.2.11
epoch: 0
release: 20.20210922git4915c308.fc44
summary: An XS implementation of Mail::SPF
url: http://www.libspf2.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_sourcerpm: libspf2-1.2.11-20.20210922git4915c308.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-SPF_XS-1.2.11-20.20210922git4915c308.fc44.x86_64.rpm
checksum_type: sha256
description:
  This is an interface to the C library libspf2 for the purpose of
  testing. While it can be used as an SPF implementation, you can also
  use Mail::SPF, which is a little more perlish.


pkgId: 61b413f10d479a3d51b54e735ca02382e84b68dda0818bbdb39623ebbe90db82
name: perl-Mail-Sendmail
arch: noarch
version: 0.82
epoch: 0
release: 3.fc44
summary: Simple platform independent mailer for Perl
url: https://metacpan.org/release/Mail-Sendmail
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Sendmail-0.82-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Sendmail-0.82-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Mail::Sendmail is a simple platform independent library for sending
  e-mail from your perl script.  It only requires Perl 5 and a network
  connection.  Mail::Sendmail contains mainly &sendmail, which takes a
  hash with the message to send and sends it. It is intended to be very
  easy to setup and use.


pkgId: ebc7ce4cf01ea76d547c111c862d395ca2eae10d739388eb43a1fb5de25f6ec4
name: perl-Mail-Server-IMAP4
arch: noarch
version: 4.01
epoch: 0
release: 2.fc44
summary: IMAP4 server implementation
url: https://metacpan.org/release/Mail-Box-IMAP4
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Box-IMAP4-4.01-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Server-IMAP4-4.01-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a place-holder, which can be used to grow code which is
  needed to implement a full IMAP4 server.
  The server implementation is not completed.


pkgId: d355c42920214768017ae9c01e5d91ca5fc0aadcbcf7305f2bffc71a6cf6e2d8
name: perl-Mail-Transport-Dbx
arch: x86_64
version: 0.07
epoch: 0
release: 57.fc44
summary: Parse Outlook Express mailboxes
url: https://metacpan.org/release/Mail-Transport-Dbx
rpm_license: GPL-2.0-or-later AND (GPL-1.0-or-later OR Artistic-1.0-Perl)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mail-Transport-Dbx-0.07-57.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mail-Transport-Dbx-0.07-57.fc44.x86_64.rpm
checksum_type: sha256
description:
  Mail::Transport::Dbx is a wrapper around libdbx to read Outlook Express
  mailboxes (more commonly known as .dbx files).


pkgId: 0b87cf6db50f2bce374309ad99c11e3a06399a2bec0032155d30eba02e0dc4cc
name: perl-Makefile-DOM
arch: noarch
version: 0.008
epoch: 0
release: 32.fc44
summary: Simple DOM parser for Makefiles
url: https://metacpan.org/release/Makefile-DOM
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Makefile-DOM-0.008-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Makefile-DOM-0.008-32.fc44.noarch.rpm
checksum_type: sha256
description:
  This libary can serve as an advanced lexer for (GNU) makefiles. It parses
  makefiles as "documents" and the parsing is lossless. The results are data
  structures similar to DOM trees. The DOM trees hold every single bit of the
  information in the original input files, including white spaces, blank
  lines and makefile comments. That means it's possible to reproduce the
  original makefiles from the DOM trees. In addition, each node of the DOM
  trees is modifiable and so is the whole tree, just like the PPI module used
  for Perl source parsing and the HTML::TreeBuilder module used for parsing
  HTML source.


pkgId: 0bc950a78fd7edf3fe505be798fbf06e890b8eb65b33ce24318d75fae0a6118a
name: perl-Makefile-Parser
arch: noarch
version: 0.216
epoch: 0
release: 32.fc44
summary: Simple parser for Makefiles
url: https://metacpan.org/release/Makefile-Parser
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Makefile-Parser-0.216-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Makefile-Parser-0.216-32.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a simple parser for Makefiles. At this very early stage, the parser
  only supports a limited set of features, so it may not recognize most of
  the advanced features provided by certain make tools like GNU make. Its
  initial purpose is to provide basic support for another module named
  Makefile::GraphViz, which is aimed to render the building process specified
  by a Makefile using the amazing GraphViz library. The Make module is not
  satisfactory for this purpose, so I decided to build one of my own.


pkgId: 48f34fb502ccbc038ea20e08e66a058f387a9ed954604d08be2a91ecb3aa83b5
name: perl-Mango
arch: noarch
version: 1.30
epoch: 0
release: 26.fc44
summary: Pure-Perl non-blocking I/O MongoDB driver
url: https://metacpan.org/release/Mango
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mango-1.30-26.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mango-1.30-26.fc44.noarch.rpm
checksum_type: sha256
description:
  Mango is a pure-Perl non-blocking I/O MongoDB driver, optimized for use
  with the Mojolicious real-time web framework, and with multiple event loop
  support. Since MongoDB is still changing rapidly, only the latest stable
  version is supported.


pkgId: fd4b6f118216a32ac6ba17bea942337e7144c31dc43eaec7f544f5b50e92c380
name: perl-Mason-Tidy
arch: noarch
version: 2.57
epoch: 0
release: 31.fc44
summary: Tidy HTML::Mason/Mason components
url: https://metacpan.org/release/Mason-Tidy
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-36.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mason-Tidy-2.57-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mason-Tidy-2.57-31.fc44.noarch.rpm
checksum_type: sha256
description:
  Mason::Tidy is the engine used by masontidy. You can call this API from
  your own program instead of executing masontidy.

  masontidy tidies Mason 1 and Mason 2 components, using perltidy to format
  the Perl code that can be embedded in various places in the component.
  masontidy does not (yet) attempt to tidy the HTML or other non-Perl content
  in a component.


pkgId: b2808bf9507a874cbe59c4fd101467308a13e54565946db9e2e87921b994590d
name: perl-MasonX-Interp-WithCallbacks
arch: noarch
version: 1.20
epoch: 0
release: 4.fc44
summary: Mason callback support via Params::CallbackRequest
url: https://metacpan.org/release/MasonX-Interp-WithCallbacks
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MasonX-Interp-WithCallbacks-1.20-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MasonX-Interp-WithCallbacks-1.20-4.fc44.noarch.rpm
checksum_type: sha256
description:
  MasonX::Interp::WithCallbacks subclasses HTML::Mason::Interp in order to
  provide a Mason callback system built on Params::CallbackRequest. Callbacks
  may be either code references provided to the new() constructor, or methods
  defined in subclasses of Params::Callback. Callbacks are triggered either
  for every request or by specially named keys in the Mason request
  arguments, and all callbacks are executed at the beginning of a request,
  just before Mason creates and executes the request component stack.


pkgId: d221333b4893b208492358b2457e4dcea2b05c297678c91304f08449eae29887
name: perl-Math-Base-Convert
arch: noarch
version: 0.13
epoch: 0
release: 2.fc44
summary: Very fast base to base conversion
url: https://metacpan.org/release/Math-Base-Convert
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Base-Convert-0.13-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Base-Convert-0.13-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides fast functions and methods to convert between
  arbitrary number bases from 2 (binary) thru 65535.


pkgId: 26be057041667ee9f598b47f5c16ffd420262b3d7c547dfae950bc2b365b5934
name: perl-Math-Base85
arch: noarch
version: 0.5
epoch: 0
release: 15.fc44
summary: Perl extension for base 85 numbers, as referenced by RFC 1924
url: https://metacpan.org/release/Math-Base85
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Base85-0.5-15.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Base85-0.5-15.fc44.noarch.rpm
checksum_type: sha256
description:
  RFC 1924 describes a compact, fixed-size representation of IPv6 addresses
  which uses a base 85 number system. This module handles some of the uglier
  details of it.


pkgId: 124fa584b302454235874845867e290eae3d41a66dc4b0050905a898b7349e97
name: perl-Math-BaseCnv
arch: noarch
version: 1.14
epoch: 0
release: 28.fc44
summary: Fast functions to CoNVert between number Bases
url: https://metacpan.org/release/Math-BaseCnv
rpm_license: GPL-3.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-BaseCnv-1.14-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-BaseCnv-1.14-28.fc44.noarch.rpm
checksum_type: sha256
description:
  BaseCnv provides a few simple functions for converting between arbitrary
  number bases. It is as fast as I currently know how to make it (of course
  relying only on the lovely Perl). If you would rather utilize an object syntax
  for number-base conversion, please see Ken Williams's
  <Ken@Forum.Swarthmore.Edu> fine Math::BaseCalc module.


pkgId: a9f8cc13acb3cf4a160886f317f5b65b1ff04195a69caeb484e80b4d23c93b6e
name: perl-Math-BigInt-FastCalc-tests
arch: x86_64
version: 0.502.000
epoch: 0
release: 521.fc44
summary: Tests for perl-Math-BigInt-FastCalc
url: https://metacpan.org/release/Math-BigInt-FastCalc
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-BigInt-FastCalc-0.502.000-521.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-BigInt-FastCalc-tests-0.502.000-521.fc44.x86_64.rpm
checksum_type: sha256
description:
  Tests from perl-Math-BigInt-FastCalc. Execute them
  with "/usr/libexec/perl-Math-BigInt-FastCalc/test".


pkgId: 5f08cb64fc562d27dc2dbb24e5938be17e5053e86c5d0a7574e775b125557d56
name: perl-Math-BigInt-GMP
arch: x86_64
version: 1.7003
epoch: 0
release: 4.fc44
summary: Use the GMP library for Math::BigInt routines
url: https://metacpan.org/release/Math-BigInt-GMP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-BigInt-GMP-1.7003-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-BigInt-GMP-1.7003-4.fc44.x86_64.rpm
checksum_type: sha256
description:
  Provides support for big integer calculations by means of the GMP library, as
  a replacement (drop-in) module for Math::BigInt's core, Math::BigInt::Calc.pm.
  Math::BigInt::GMP does not use Math::GMP, but provides its own XS layer to
  access the GMP library. This cuts out another (perl subroutine) layer and
  also reduces the memory footprint by not loading Math::GMP and Carp at all.


pkgId: cb948af03cc673e00f8e1478716aa07130f3788af69b02b39b3243128656cf34
name: perl-Math-Calc-Units
arch: noarch
version: 1.07
epoch: 0
release: 46.fc44
summary: Human-readable unit-aware calculator
url: https://metacpan.org/release/Math-Calc-Units
rpm_license: GPL-2.0-only OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Calc-Units-1.07-46.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Calc-Units-1.07-46.fc44.noarch.rpm
checksum_type: sha256
description:
  Math::Calc::Units is a simple calculator that keeps track of units. It
  currently handles combinations of byte sizes and duration only, although
  adding any other multiplicative types is easy. Any unknown type is treated
  as a unique user type (with some effort to map English plurals to their
  singular forms).


pkgId: 894f1a0b49553b8f191d99371f68c754a9848f2c52410b4a580405919dd03d92
name: perl-Math-Complex
arch: noarch
version: 1.63
epoch: 0
release: 522.fc44
summary: Complex numbers and trigonometric functions
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-5.42.0-522.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Complex-1.63-522.fc44.noarch.rpm
checksum_type: sha256
description:
  This package lets you create and manipulate complex numbers. By default, Perl
  limits itself to real numbers, but an extra "use" statement brings full
  complex support, along with a full set of mathematical functions typically
  associated with and/or extended to complex numbers.


pkgId: 87fa8e5c179c61795bdfca85f16cd876b43e69e490e76a5f1aae9f876977a327
name: perl-Math-ConvexHull
arch: noarch
version: 1.04
epoch: 0
release: 38.fc44
summary: Calculate convex hulls using Graham's scan (n*log(n))
url: https://metacpan.org/release/Math-ConvexHull
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-ConvexHull-1.04-38.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-ConvexHull-1.04-38.fc44.noarch.rpm
checksum_type: sha256
description:
  Math::ConvexHull is a simple module that calculates convex hulls from a set
  of points in 2D space. It is a straightforward implementation of the
  algorithm known as Graham's scan which, with complexity of O(n*log(n)), is
  the fastest known method of finding the convex hull of an arbitrary set of
  points. There are some methods of eliminating points that cannot be part of
  the convex hull. These may or may not be implemented in a future version.


pkgId: 0a07e485b96877233c64abfba6f477db9edd071da953d646f7964899fd989d64
name: perl-Math-ConvexHull-MonotoneChain
arch: x86_64
version: 0.01
epoch: 0
release: 45.fc44
summary: Monotone chain algorithm for finding a convex hull in 2D
url: https://metacpan.org/release/Math-ConvexHull-MonotoneChain
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-ConvexHull-MonotoneChain-0.01-45.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-ConvexHull-MonotoneChain-0.01-45.fc44.x86_64.rpm
checksum_type: sha256
description:
  This is somewhat experimental still.

  This (XS) module optionally exports a single function C<convex_hull>
  which calculates the convex hull of the input points and returns it.
  The algorithm is C<O(n log n)> due to having to sort the input list,
  but should be somewhat faster than a plain Graham's scan (also C<O(n log n)>)
  in practice since it avoids polar coordinates.


pkgId: 47e3a5c5ae38e1977256ec38af3a13eac0594056900e664ed06a222a9628a4d5
name: perl-Math-Derivative
arch: noarch
version: 1.01
epoch: 0
release: 24.fc44
summary: Numeric 1st and 2nd order differentiation
url: https://metacpan.org/release/Math-Derivative
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Derivative-1.01-24.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Derivative-1.01-24.fc44.noarch.rpm
checksum_type: sha256
description:
  This Perl package exports functions for performing numerical first
  (Derivative1) and second Derivative2) order differentiation on vectors of
  data. They both take references to two arrays containing the x and y
  ordinates of the data and return an array of the 1st or 2nd derivative at
  the given x ordinates. Derivative2 may optionally be given values to use
  for the first derivative at the start and end points of the data -
  otherwise 'natural' values are used.


pkgId: 31eba67fc625fbc85543222f22010080ca228a4e38435f883945fc72c0c1f970
name: perl-Math-Expression-Evaluator
arch: noarch
version: 0.3.2
epoch: 0
release: 39.fc44
summary: Parses, compiles and evaluates mathematics expressions
url: https://metacpan.org/release/Math-Expression-Evaluator
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND LicenseRef-Fedora-Public-Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Expression-Evaluator-0.3.2-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Expression-Evaluator-0.3.2-39.fc44.noarch.rpm
checksum_type: sha256
description:
  Math::Expression::Evaluator is a parser, compiler and interpreter for
  mathematical expressions. It can handle normal arithmetic (including
  powers wit ^ or **), built-in functions like sin() and variables.


pkgId: e64c7a76e01929fb614172222f21df641d48730027be2501dc7df57bb5e85922
name: perl-Math-FFT
arch: x86_64
version: 1.36
epoch: 0
release: 19.fc44
summary: Perl module to calculate Fast Fourier Transforms
url: https://metacpan.org/release/Math-FFT
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND LicenseRef-Fedora-UltraPermissive
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-FFT-1.36-19.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-FFT-1.36-19.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module implements some algorithms for calculating Fast Fourier
  Transforms for one-dimensional data sets of size 2^n.


pkgId: 8eacea594bf93e211b429bd4686a77f392690f039949cbd6c203d81a604b0f4f
name: perl-Math-GMP
arch: x86_64
version: 2.25
epoch: 0
release: 15.fc44
summary: High speed arbitrary size integer math
url: https://metacpan.org/release/Math-GMP
rpm_license: LGPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-GMP-2.25-15.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-GMP-2.25-15.fc44.x86_64.rpm
checksum_type: sha256
description:
  Math::GMP was designed to be a drop-in replacement both for Math::BigInt and
  for regular integer arithmetic. Unlike BigInt, though, Math::GMP uses the GNU
  gmp library for all of its calculations, as opposed to straight Perl functions.
  This can result in speed improvements.


pkgId: 071170c62878d756ba308f1f580c57b2ec0fe2f8e14449d45c093e19da21f80b
name: perl-Math-Libm
arch: x86_64
version: 1.00
epoch: 0
release: 47.fc44
summary: Perl extension for the C math library, libm
url: https://metacpan.org/release/Math-Libm
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Libm-1.00-47.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Libm-1.00-47.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module is a translation of the C math.h file. It exports the following
  selected constants and functions:

  M_1_PI M_2_PI M_2_SQRTPI M_E M_LN10 M_LN2 M_LOG10E M_LOG2E M_PI M_PI_2 M_PI_4
  M_SQRT1_2 M_SQRT2 acos acosh asin asinh atan atanh cbrt ceil cosh erf erfc
  expm1 floor hypot j0 j1 jn lgamma_r log10 log1p pow rint sinh tan tanh y0 y1 yn


pkgId: ab8d3d829f33935b4a740fe5d6175e4c804a6c4350f4f0bb28cd73847bf1a9c8
name: perl-Math-MatrixReal
arch: noarch
version: 2.13
epoch: 0
release: 27.fc44
summary: Manipulate matrix of reals
url: https://metacpan.org/release/Math-MatrixReal
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-MatrixReal-2.13-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-MatrixReal-2.13-27.fc44.noarch.rpm
checksum_type: sha256
description:
  Implements the data type "matrix of reals" (and consequently also
  "vector of reals") which can be used almost like any other basic
  Perl type thanks to OPERATOR OVERLOADING, i.e.,

      $A = $matrix1 * $matrix2;
      $B = $A ** 2;
      $C = $A + 2*B;
      $D = $C - $B/2;
      $inverse = $C ** -1;
      $inverse = 1/$C;

  does what you would like it to do.


pkgId: db3b7a57dda2c8492c6cb874a1087231ba3be9774a605223fd11218af5338787
name: perl-Math-NumSeq
arch: noarch
version: 75
epoch: 0
release: 12.fc44
summary: Number sequences
url: https://metacpan.org/release/Math-NumSeq
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-NumSeq-75-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-NumSeq-75-12.fc44.noarch.rpm
checksum_type: sha256
description:
  This package contains a base class for number sequences and a collection of
  its instances which implements various sequences like prime numbers or
  multiples of a constant. Sequence objects can iterate through values and some
  sequences have random access or a predicate test.


pkgId: 38edaf139f3511e879ef5050f77c75f2972d6665b38c4751c2d017ecb69c0b77
name: perl-Math-PlanePath
arch: noarch
version: 129
epoch: 0
release: 16.fc44
summary: Mathematical paths through the 2-D plane
url: http://user42.tuxfamily.org/math-planepath/index.html
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-PlanePath-129-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-PlanePath-129-16.fc44.noarch.rpm
checksum_type: sha256
description:
  This spot of Perl code calculates various mathematical paths through a 2-D X,Y
  plane. There's no drawing in Math-PlanePath, just coordinate calculations.


pkgId: 23d154373760e4b012bd2a34f8907770cbde4cd4902b9031f6148d8444a61acb
name: perl-Math-Prime-XS
arch: x86_64
version: 0.27
epoch: 0
release: 33.fc44
summary: Detect and calculate prime numbers with deterministic tests
url: https://metacpan.org/release/Math-Prime-XS
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Prime-XS-0.27-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Prime-XS-0.27-33.fc44.x86_64.rpm
checksum_type: sha256
description:
  Math::Prime::XS detects and calculates prime numbers by either applying
  Modulo operator division, the Sieve of Eratosthenes, a Summation
  calculation or Trial division.


pkgId: 9407ab096d672a3af1d71da1d58d114b2bddface51c12bec4bbc4185588100bc
name: perl-Math-Random-ISAAC
arch: noarch
version: 1.004
epoch: 0
release: 45.fc44
summary: Perl interface to the ISAAC PRNG algorithm
url: https://metacpan.org/release/Math-Random-ISAAC
rpm_license: LicenseRef-Callaway-MIT OR GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Random-ISAAC-1.004-45.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Random-ISAAC-1.004-45.fc44.noarch.rpm
checksum_type: sha256
description:
  As with other Pseudo-Random Number Generator (PRNG) algorithms like the
  Mersenne Twister (see Math::Random::MT), this algorithm is designed to take
  some seed information and produce seemingly random results as output.


pkgId: 6bb14c9a4171ae1c3499a2e35efc3867e63139a34c48b6df383dc530f03e0928
name: perl-Math-Random-ISAAC-XS
arch: x86_64
version: 1.004
epoch: 0
release: 49.fc44
summary: C implementation of the ISAAC PRNG algorithm
url: https://metacpan.org/release/Math-Random-ISAAC-XS
rpm_license: LicenseRef-Callaway-MIT OR GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Random-ISAAC-XS-1.004-49.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Random-ISAAC-XS-1.004-49.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module implements the same interface as Math::Random::ISAAC in C and can
  be used as a drop-in replacement. This is the recommended implementation of the
  module, based on Bob Jenkins' reference implementation in C.


pkgId: a33b5532a147dc69239dd86d22323eb8d0f9b4465be7354d31673bc1bb6f58e0
name: perl-Math-Random-MT
arch: x86_64
version: 1.17
epoch: 0
release: 16.fc44
summary: The Mersenne Twister PRNG
url: http://metacpan.org/release/Math-Random-MT
rpm_license: LicenseRef-Callaway-BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Random-MT-1.17-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Random-MT-1.17-16.fc44.x86_64.rpm
checksum_type: sha256
description:
  The Mersenne Twister is a pseudorandom number generator developed by Makoto
  Matsumoto and Takuji Nishimura. It is described in their paper at
  <URL:http://www.math.keio.ac.jp/~nisimura/random/doc/mt.ps>. This algorithm
  has a very uniform distribution and is good for modelling purposes but do
  not use it for cryptography.


pkgId: 6fc45ce0db48ae04375e45bc809942fbfb37c73f83d7eaa880333bd42682690c
name: perl-Math-Random-MT-Auto
arch: x86_64
version: 6.23
epoch: 0
release: 24.fc44
summary: Auto-seeded Mersenne Twister PRNGs
url: https://metacpan.org/release/Math-Random-MT-Auto
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Random-MT-Auto-6.23-24.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Random-MT-Auto-6.23-24.fc44.x86_64.rpm
checksum_type: sha256
description:
  The Mersenne Twister is a fast pseudo-random number generator (PRNG) that is
  capable of providing large volumes (> 10^6004) of "high quality"
  pseudo-random data to applications that may exhaust available "truly" random
  data sources or system-provided PRNGs such as rand.


pkgId: 826f523f38e39cc4a9a8b2c55450d15681f860f35dfc2af5f8449e69308399c1
name: perl-Math-Random-Secure
arch: noarch
version: 0.08.0001
epoch: 0
release: 27.fc44
summary: Cryptographically-secure, cross-platform replacement for rand()
url: https://metacpan.org/release/Math-Random-Secure
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Random-Secure-0.08.0001-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Random-Secure-0.08.0001-27.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is intended to provide a cryptographically-secure replacement
  for Perl's built-in rand function.


pkgId: 4e255ec5b888051e46c42b89318e51580cbe9c2ae02e89f7e5cc3e97aefd8bba
name: perl-Math-Round
arch: noarch
version: 0.08
epoch: 0
release: 7.fc44
summary: Perl extension for rounding numbers
url: https://metacpan.org/release/Math-Round
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Round-0.08-7.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Round-0.08-7.fc44.noarch.rpm
checksum_type: sha256
description:
  Math::Round supplies functions that will round numbers in different ways. The
  functions round and nearest are exported by default; others are available as
  described below. "use ... qw(:all)" exports all functions.


pkgId: dadc5a4a54a349c329e972a36a89c98767c79ea38a82d58f69c4da5b05adff47
name: perl-Math-Spline
arch: noarch
version: 0.02
epoch: 0
release: 29.fc44
summary: Cubic Spline Interpolation of data
url: https://metacpan.org/release/Math-Spline
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Spline-0.02-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Spline-0.02-29.fc44.noarch.rpm
checksum_type: sha256
description:
  This package provides cubic spline interpolation of numeric data. The data
  is passed as references to two arrays containing the x and y ordinates. It
  may be used as an exporter of the numerical functions or, more easily as a
  class module.


pkgId: 1f11aa82c88ef7b8a754cfc0c8586348b1c715e2a8394c9c3c95cd9dfb76cdaa
name: perl-Math-Symbolic
arch: noarch
version: 0.613
epoch: 0
release: 4.fc44
summary: Symbolic calculations
url: https://metacpan.org/release/Math-Symbolic
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Symbolic-0.613-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Symbolic-0.613-4.fc44.noarch.rpm
checksum_type: sha256
description:
  Math::Symbolic is intended to offer symbolic calculation capabilities to
  the Perl programmer without using external (and commercial) libraries
  and/or applications.


pkgId: 27a3a3b6e007f5834fe63176f20007392233f0833f3c207ad481fda87e6fa01c
name: perl-Math-Utils
arch: noarch
version: 1.14
epoch: 0
release: 17.fc44
summary: Useful mathematical functions not in Perl
url: https://metacpan.org/release/Math-Utils
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-Utils-1.14-17.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-Utils-1.14-17.fc44.noarch.rpm
checksum_type: sha256
description:
  Math::Utils contains implementations of commonly used mathematical
  functions and operations that are not part of standard Perl.


pkgId: c1f15e04c26877de5686375c1769427c294644c57122b35fb0924fb790cd73c1
name: perl-Math-VectorReal
arch: noarch
version: 1.02
epoch: 0
release: 2.fc44
summary: Module to handle 3D Vector Mathematics
url: https://metacpan.org/dist/Math-VectorReal
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Math-VectorReal-1.02-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Math-VectorReal-1.02-2.fc44.noarch.rpm
checksum_type: sha256
description:
  The Math::VectorReal package defines a 3D mathematical "vector", in a
  way that is compatible with the previous CPAN module Math::MatrixReal.
  However it provides a more vector oriented set of mathematical functions
  and overload operators, to the MatrixReal package. For example the
  normal perl string functions "x" and "." have been overloaded to allow
  vector cross and dot product operations. Vector math formula thus looks
  like vector math formula in perl programs using this package.


pkgId: 0366bff545d7690d8efa6dfd270aed0cdc92bb560d472d6ee626d336c852c8e2
name: perl-MaxMind-DB-Common
arch: noarch
version: 0.040001
epoch: 0
release: 19.fc44
summary: Code shared by the MaxMind database reader and writer
url: https://metacpan.org/release/MaxMind-DB-Common
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MaxMind-DB-Common-0.040001-19.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MaxMind-DB-Common-0.040001-19.fc44.noarch.rpm
checksum_type: sha256
description:
  This distribution provides some shared code for use by both the MaxMind
  database reader and writer Perl modules.


pkgId: fcc707e4a749c1903d0b09ca53449b65120fd1d31ff34a518d3f54d540d9bf01
name: perl-MaxMind-DB-Reader
arch: x86_64
version: 1.000014
epoch: 0
release: 18.fc44
summary: Read MaxMind database files and look up IP addresses
url: https://metacpan.org/release/MaxMind-DB-Reader
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MaxMind-DB-Reader-1.000014-18.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MaxMind-DB-Reader-1.000014-18.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module provides a low-level interface to the MaxMind database file format
  <http://maxmind.github.io/MaxMind-DB/>.


pkgId: edac5ea1f09569eb3f423eeaeb04f49140f89de52a8ff493c6a2934e6adbf186
name: perl-MaxMind-DB-Reader-XS
arch: x86_64
version: 1.000009
epoch: 0
release: 16.fc44
summary: Fast XS implementation of MaxMind DB reader
url: https://metacpan.org/release/MaxMind-DB-Reader-XS
rpm_license: Artistic-2.0 AND (GPL-1.0-or-later OR Artistic-1.0-Perl) AND LicenseRef-Fedora-Public-Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MaxMind-DB-Reader-XS-1.000009-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MaxMind-DB-Reader-XS-1.000009-16.fc44.x86_64.rpm
checksum_type: sha256
description:
  Simply installing this module causes MaxMind::DB::Reader to use the XS
  implementation, which is much faster than the Perl implementation.

  This Perl module is deprecated and will only receive fixes for major bugs and
  security vulnerabilities. New features and functionality will not be added.


pkgId: 73229c2c4c56fa10c7013b29473fd3c2dc4fb7a68c5e6305009f60457056e950
name: perl-MaxMind-DB-Reader-XS-tests
arch: noarch
version: 1.000009
epoch: 0
release: 16.fc44
summary: Tests for perl-MaxMind-DB-Reader-XS
url: https://metacpan.org/release/MaxMind-DB-Reader-XS
rpm_license: Artistic-2.0 AND CC-BY-SA-3.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MaxMind-DB-Reader-XS-1.000009-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MaxMind-DB-Reader-XS-tests-1.000009-16.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-MaxMind-DB-Reader-XS. Execute them
  with "/usr/libexec/perl-MaxMind-DB-Reader-XS/test".


pkgId: bc19ba9e741e901c38f59474636c44551ceae4dca993202ad74f577f94296e69
name: perl-Maypole
arch: noarch
version: 2.13
epoch: 1
release: 47.fc44
summary: MVC web application framework
url: http://maypole.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Maypole-2.13-47.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Maypole-2.13-47.fc44.noarch.rpm
checksum_type: sha256
description:
  Maypole is a Perl framework for MVC-oriented web
  applications, similar to Jakarta's Struts. Maypole
  is designed to minimize coding requirements for
  creating simple web interfaces to databases, while
  remaining flexible enough to support enterprise web
  applications.


pkgId: fae7183dcfbd9f8c1a0b7c2378abc426026eed223c274421796c358133b28b3c
name: perl-Memoize
arch: noarch
version: 1.17
epoch: 0
release: 522.fc44
summary: Transparently speed up functions by caching return values
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-5.42.0-522.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Memoize-1.17-522.fc44.noarch.rpm
checksum_type: sha256
description:
  Memoizing a function makes it faster by trading space for time. It does
  this by caching the return values of the function in a table. If you call
  the function again with the same arguments, memoize jumps in and gives
  you the value out of the table, instead of letting the function compute
  the value all over again.


pkgId: dd8e3a4f4e97657f450444b9e94ab05a59039ed7856c2563a917842b0301d767
name: perl-Memoize-ExpireLRU
arch: noarch
version: 0.56
epoch: 0
release: 27.fc44
summary: Expiry plug-in for Memoize that adds LRU cache expiration
url: https://metacpan.org/release/Memoize-ExpireLRU
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Memoize-ExpireLRU-0.56-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Memoize-ExpireLRU-0.56-27.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements an expiry policy for Memoize that follows LRU
  semantics, that is, the last n results, where n is specified as the
  argument to the CACHESIZE parameter, will be cached.


pkgId: 65c2ba6cfc75313d403bfa90bfd0547a7fbabbf7b64b97060d1e766e9a045d02
name: perl-Menlo
arch: noarch
version: 1.9019
epoch: 0
release: 24.fc44
summary: A CPAN client
url: https://metacpan.org/release/Menlo
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Menlo-1.9019-24.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Menlo-1.9019-24.fc44.noarch.rpm
checksum_type: sha256
description:
  Menlo is a code name for cpanm 2.0, developed with the goal to
  replace cpanm and its back-end with a more flexible, extensible and
  easier to use APIs.


pkgId: 572030c4345ea9e493259c9e86b575c0ceab07baab17165a87d4ce455a4b2b6c
name: perl-Menlo-Legacy
arch: noarch
version: 1.9022
epoch: 0
release: 23.fc44
summary: Legacy internal and client support for Menlo
url: https://metacpan.org/release/Menlo-Legacy
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Menlo-Legacy-1.9022-23.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Menlo-Legacy-1.9022-23.fc44.noarch.rpm
checksum_type: sha256
description:
  Menlo::Legacy is a package to install Menlo::CLI::Compat which is a
  compatibility library that implements the classic version of cpanminus
  internals and behavios. This is so that existing users of cpanm and API
  clients such as Carton, Carmel and App::cpm) can rely on the stable
  features and specific behaviors of cpanm.


pkgId: 17856d821f665b5d64816d48988a6aa7015e68ead4727fba2905a2333e89dd17
name: perl-Meta-Builder
arch: noarch
version: 0.004
epoch: 0
release: 21.fc44
summary: Tools for creating Meta objects to track custom metrics
url: https://metacpan.org/release/Meta-Builder
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-36.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Meta-Builder-0.004-21.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Meta-Builder-0.004-21.fc44.noarch.rpm
checksum_type: sha256
description:
  Meta programming is becoming more and more popular. The popularity of Meta
  programming comes from the fact that many problems are made significantly
  easier. There are a few specialized Meta tools out there, for instance
  Class:MOP which is used by Moose to track class metadata.


pkgId: 590b9b4ee2272d43d983085f931b26e62244f5b9db0d11a1524dff6e5e3ecef2
name: perl-MetaCPAN-API
arch: noarch
version: 0.51
epoch: 0
release: 25.fc44
summary: A comprehensive, DWIM-featured API to MetaCPAN
url: https://metacpan.org/release/MetaCPAN-API
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MetaCPAN-API-0.51-25.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MetaCPAN-API-0.51-25.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a hopefully-complete API-compliant interface to MetaCPAN
  (https://metacpan.org/) with DWIM capabilities, to make your life easier.

  However, it has been completely rewritten to address a multitude of problems,
  and is now available under the new official name: MetaCPAN::Client.

  Please do not use this module.


pkgId: 7bc7e0df52404bddec1aa663682c1dbf77ea688fa9fe59a93cab2d9032664c02
name: perl-MetaCPAN-Client
arch: noarch
version: 2.038000
epoch: 0
release: 1.fc44
summary: A comprehensive, DWIM-featured client to the MetaCPAN API
url: https://github.com/CPAN-API/metacpan-client
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MetaCPAN-Client-2.038000-1.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MetaCPAN-Client-2.038000-1.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a hopefully-complete API-compliant interface to MetaCPAN
  (https://metacpan.org/) with DWIM capabilities, to make your life easier.


pkgId: ba79faab5f924c5cd530ca7d7347acb2813d1ab8f2b756d774a30ea555163bff
name: perl-Method-Signatures-Simple
arch: noarch
version: 1.07
epoch: 0
release: 31.fc44
summary: Basic method declarations with signatures, without source filters
url: https://metacpan.org/release/Method-Signatures-Simple
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Method-Signatures-Simple-1.07-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Method-Signatures-Simple-1.07-31.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides basic method and func keywords with simple
  signatures. It's intentionally simple, and is supposed to be a
  stepping stone for its bigger brothers MooseX::Method::Signatures and
  Method::Signatures.  It only has a small benefit over regular subs,
  so if you want more features, look at those modules.  But if you're
  looking for a small amount of syntactic sugar, this might just be enough.


pkgId: a7eb23f60df7aa3ed2ab6598bfce0e65bf0aab294cbafc919dde8bf3a81c2bfd
name: perl-Metrics-Any
arch: noarch
version: 0.10
epoch: 0
release: 8.fc44
summary: Abstract collection of monitoring metrics
url: https://metacpan.org/release/Metrics-Any/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Metrics-Any-0.10-8.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Metrics-Any-0.10-8.fc44.noarch.rpm
checksum_type: sha256
description:
  Provides a central location for modules to report monitoring metrics, such
  as counters of the number of times interesting events have happened, and
  programs to collect up and send those metrics to monitoring services.


pkgId: bb2932e6040488a3c202b2dca71a661a9200f2be85dd92fd9a77984b8df717e2
name: perl-Minion
arch: noarch
version: 11.0
epoch: 0
release: 2.fc44
summary: High performance job queue for the Perl programming language
url: https://metacpan.org/release/Minion
rpm_license: Artistic-2.0 AND CC-BY-SA-4.0 AND MIT AND ISC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Minion-11.0-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Minion-11.0-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Minion is a high performance job queue for the Perl programming language,
  with support for multiple named queues, priorities, delayed jobs, job
  dependencies, job progress, job results, retries with back-off, rate
  limiting, unique jobs, statistics, distributed workers, parallel
  processing, auto-scaling, remote control, Mojolicious admin UI, resource
  leak protection and multiple backends (such as PostgreSQL).


pkgId: 5cde4a9e433271711408ab836286342d40df57c6f8ddd75717ed119b96fa85c7
name: perl-Minion-Backend-SQLite
arch: noarch
version: 5.0.7
epoch: 0
release: 10.fc44
summary: SQLite backend for Minion job queue
url: https://metacpan.org/release/Minion-Backend-SQLite/
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Minion-Backend-SQLite-5.0.7-10.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Minion-Backend-SQLite-5.0.7-10.fc44.noarch.rpm
checksum_type: sha256
description:
  Minion::Backend::SQLite is a backend for Minion based on Mojo::SQLite. All
  necessary tables will be created automatically with a set of migrations
  named minion. If no connection string or :temp: is provided, the database
  will be created in a temporary directory.


pkgId: 91e0ced55d1b778d418affc46fb9de8c06c133c93d316e054600fc0e3c0d1b6b
name: perl-Mixin-ExtraFields
arch: noarch
version: 0.140003
epoch: 0
release: 9.fc44
summary: Add extra stashes of data to your objects
url: https://metacpan.org/release/Mixin-ExtraFields
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mixin-ExtraFields-0.140003-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mixin-ExtraFields-0.140003-9.fc44.noarch.rpm
checksum_type: sha256
description:
  Mixin::ExtraFields provides a simple way to add an arbitrary number of stashes
  for named data.  These data can be stored in the object, in a database, or
  anywhere else.  The storage mechanism is abstracted away from the provided
  interface, so one storage mechanism can be easily swapped for another.
  Multiple ExtraFields stashes can be mixed into one class, using one or many
  storage mechanisms.


pkgId: b9f30f06d82161d614bf50504b2ab1f35b6dbd51caf12616569a1e028d4ca83d
name: perl-Mixin-Linewise
arch: noarch
version: 0.111
epoch: 0
release: 9.fc44
summary: Write your linewise code for handles; this does the rest
url: https://metacpan.org/release/Mixin-Linewise
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mixin-Linewise-0.111-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mixin-Linewise-0.111-9.fc44.noarch.rpm
checksum_type: sha256
description:
  It's boring to deal with opening files for IO, converting strings to
  handle-like objects, and all that. With Mixin::Linewise::Readers and
  Mixin::Linewise::Writers, you can just write a method to handle handles,
  and methods for handling strings and file names are added for you.


pkgId: 68e2b71567fd75c0a701df3304e52886ce4bbe1ff2cdcfd1e06b40099a02ac13
name: perl-Mo
arch: noarch
version: 0.40
epoch: 0
release: 29.fc44
summary: Perl micro-object system
url: https://metacpan.org/release/Mo
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mo-0.40-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mo-0.40-29.fc44.noarch.rpm
checksum_type: sha256
description:
  Mo provides the bare-minimum for a Perl object system, compared to other similar
  systems such as Moose, Mouse and Moo.


pkgId: 75744284bf8e1b5fa4220ea91a436a0b1865f6baddbfbbace0d3710c9b2769d6
name: perl-Mock-MonkeyPatch
arch: noarch
version: 1.03
epoch: 0
release: 4.fc44
summary: Monkey patching with test mocking in mind
url: https://metacpan.org/dist/Mock-MonkeyPatch
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mock-MonkeyPatch-1.03-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mock-MonkeyPatch-1.03-4.fc44.noarch.rpm
checksum_type: sha256
description:
  Mock::MonkeyPatch injects a subroutine in the place of an existing one.
  It returns an object by which you can revisit the manner in which the
  mocked subroutine was called. Further when the object goes out of
  scope (or when the "restore" method is called) the original subroutine
  is replaced.


pkgId: 58067aef5dd6fb4792109907f96b551a8a6cde450153b55fd125bf4ee45ae28d
name: perl-Mock-Quick
arch: noarch
version: 1.111
epoch: 0
release: 27.fc44
summary: Quickly mock objects and classes, side-effect free
url: https://metacpan.org/release/Mock-Quick
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-01.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mock-Quick-1.111-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mock-Quick-1.111-27.fc44.noarch.rpm
checksum_type: sha256
description:
  Mock-Quick is here to solve the current problems with Mocking libraries.

  There are a couple of Mocking libraries available on CPAN. The primary problems
  with these libraries include verbose syntax, and most importantly side-effects.
  Some Mocking libraries expect you to mock a specific class, and will unload it
  then redefine it. This is particularly a problem if you only want to override
  a class on a lexical level.

  Mock-Object provides a declarative mocking interface that results in a very
  concise, but clear syntax. There are separate facilities for mocking object
  instances, and classes. You can quickly create an instance of an object with
  custom attributes and methods. You can also quickly create an anonymous class,
  optionally inheriting from another, with whatever methods you desire.

  Mock-Object also provides a tool that provides an OO interface to overriding
  methods in existing classes. This tool also allows for the restoration of the
  original class methods. Best of all, this is a localized tool: when your
  control object falls out of scope, the original class is restored.


pkgId: d557d6dfe6b123b3366753ec036c30ed62c0aca412d733d2eec6c77dcd82ccb8
name: perl-Mock-Sub
arch: noarch
version: 1.09
epoch: 0
release: 26.fc44
summary: Mock package, object and standard subroutines, with unit testing in mind
url: https://metacpan.org/release/Mock-Sub
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mock-Sub-1.09-26.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mock-Sub-1.09-26.fc44.noarch.rpm
checksum_type: sha256
description:
  Easy to use and very lightweight module for mocking out sub calls. Very
  useful for testing areas of your own modules where getting coverage may
  be difficult due to nothing to test against, and/or to reduce test run
  time by eliminating the need to call subs that you really don't want or
  need to test.


pkgId: c4e9090592caa7dac41761208ca4eca2dea31c0a2062b647c0a87955c1122155
name: perl-ModelSim-List
arch: noarch
version: 0.06
epoch: 0
release: 47.fc44
summary: Analyse the 'list' output of the ModelSim simulator
url: https://metacpan.org/release/ModelSim-List
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-ModelSim-List-0.06-47.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-ModelSim-List-0.06-47.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a class named ModelSim::List with which the EDA tester
  can easily check in the signals contained in the files generated by
  ModelSim's "write list" command in a programming manner.


pkgId: d519ea4349c1178ab5b95ced2dec7dfb6208906e42969e0b500e3591b28839f6
name: perl-Modern-Perl
arch: noarch
version: 1.20250607
epoch: 0
release: 3.fc44
summary: Enable all of the features of Modern Perl with one command
url: https://metacpan.org/release/Modern-Perl
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Modern-Perl-1.20250607-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Modern-Perl-1.20250607-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Modern Perl often relies on the presence of several core and CPAN pragmas
  and modules.  Wouldn't it be nice to use them all with a single command?


pkgId: f17c349181d7a5eab2ed422b70895b381d149e3ff9d7bb7130d401fbce5e3c04
name: perl-Module-Build
arch: noarch
version: 0.42.34
epoch: 2
release: 10.fc44
summary: Build and install Perl modules
url: https://metacpan.org/release/Module-Build
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Build-0.42.34-10.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Build-0.42.34-10.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Build is a system for building, testing, and installing Perl
  modules. It is meant to be an alternative to ExtUtils::MakeMaker.
  Developers may alter the behavior of the module through sub-classing in a
  much more straightforward way than with MakeMaker. It also does not require
  a make on your system - most of the Module::Build code is pure-perl and
  written in a very cross-platform way. In fact, you don't even need a shell,
  so even platforms like MacOS (traditional) can use it fairly easily. Its
  only prerequisites are modules that are included with perl 5.6.0, and it
  works fine on perl 5.005 if you can install a few additional modules.


pkgId: 579bb47f3780bd8a2f7133027abb00fff1172690d64138c6532529bbe66487a6
name: perl-Module-Build-Deprecated
arch: noarch
version: 0.4210
epoch: 0
release: 33.fc44
summary: Collection of modules removed from Module-Build
url: https://metacpan.org/release/Module-Build-Deprecated
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Build-Deprecated-0.4210-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Build-Deprecated-0.4210-33.fc44.noarch.rpm
checksum_type: sha256
description:
  This module contains a number of module that have been removed from
  Module-Build:
  Module::Build::ModuleInfo - This has been superseded by Module::Metadata
  Module::Build::Version - This has been replaced by version
  Module::Build::YAML - This has been replaced by CPAN::Meta::YAML


pkgId: 4d53d7e1fd229d63521f3dab08edfaa89c90c5ef530c15b7713ade20eb82ffbc
name: perl-Module-Build-Prereqs-FromCPANfile
arch: noarch
version: 0.02
epoch: 0
release: 9.fc44
summary: Construct prereq parameters of Module::Build from cpanfile
url: https://metacpan.org/dist/Module-Build-Prereqs-FromCPANfile
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Build-Prereqs-FromCPANfile-0.02-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Build-Prereqs-FromCPANfile-0.02-9.fc44.noarch.rpm
checksum_type: sha256
description:
  This simple module reads cpanfile and converts its content into valid
  prereq parameters for new() method of Module::Build.


pkgId: 1a8eafbef6f1a2004ceb31e061a4c34a94b4e3dee4f017d2fc003145e3ae5e16
name: perl-Module-Build-SDL
arch: x86_64
version: 2.548
epoch: 0
release: 32.fc44
summary: Module::Build subclass for building SDL applications
url: http://sdl.perl.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-SDL-2.548-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Build-SDL-2.548-32.fc44.x86_64.rpm
checksum_type: sha256
description:
  Module::Build::SDL is a subclass of Module::Build created to make easy
  some tasks specific to SDL applications - e.g. packaging SDL
  application/game into PAR archive.


pkgId: e4437ef153c44603e3c869e51870471e48c4b5a409fa7c75b6f4c225bd33485e
name: perl-Module-Build-Tiny
arch: noarch
version: 0.052
epoch: 0
release: 3.fc44
summary: A tiny replacement for Module::Build
url: https://metacpan.org/release/Module-Build-Tiny
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Build-Tiny-0.052-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Build-Tiny-0.052-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Many Perl distributions use a Build.PL file instead of a Makefile.PL file to
  drive distribution configuration, build, test and installation. Traditionally,
  Build.PL uses Module::Build as the underlying build system. This module
  provides a simple, lightweight, drop-in replacement.

  Whereas Module::Build has over 6,700 lines of code; this module has less than
  70, yet supports the features needed by most pure-Perl distributions.


pkgId: 4bf4915f4434e2384a3032aa33eb2f2ffd7728f3d46de1416569d6fd02c4d849
name: perl-Module-Build-Using-PkgConfig
arch: noarch
version: 0.03
epoch: 0
release: 18.fc44
summary: Extend Module::Build to easily use platform libraries provided by pkg-config
url: https://metacpan.org/release/Module-Build-Using-PkgConfig/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Build-Using-PkgConfig-0.03-18.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Build-Using-PkgConfig-0.03-18.fc44.noarch.rpm
checksum_type: sha256
description:
  This subclass of Module::Build provides some handy methods to assist the
  Build.PL script of XS-based module distributions that make use of platform
  libraries managed by pkg-config.


pkgId: a299b87fb7f15cc5073400b2d430e60560d1409d7d3aae7b245e3356b07f7976
name: perl-Module-Build-WithXSpp
arch: noarch
version: 0.14
epoch: 0
release: 40.fc44
summary: XS++ enhanced flavor of Module::Build
url: https://metacpan.org/release/Module-Build-WithXSpp
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Build-WithXSpp-0.14-40.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Build-WithXSpp-0.14-40.fc44.noarch.rpm
checksum_type: sha256
description:
  This subclass of Module::Build adds some tools and processes to make it
  easier to use for wrapping C++ using XS++ (ExtUtils::XSpp).


pkgId: 3a90101e8937477eb96bf23f31d5ebe4fecf8a256346fd248a2f646c6a3f1ec0
name: perl-Module-Build-XSUtil
arch: noarch
version: 0.19
epoch: 0
release: 24.fc44
summary: A Module::Build class for building XS modules
url: https://github.com/hideo55/Module-Build-XSUtil
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Build-XSUtil-0.19-24.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Build-XSUtil-0.19-24.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Build::XSUtil is a subclass of Module::Build to support building XS
  modules. It adds a number of compiler-related optional parameters to
  Module::Build's "new" method.


pkgId: 38fae546f87cedeca345f066ed8b7947f0817d2c2608f7592ab23eadb824d39e
name: perl-Module-CPANTS-Analyse
arch: noarch
version: 1.02
epoch: 0
release: 7.fc44
summary: Generate Kwalitee ratings for a distribution
url: https://metacpan.org/release/Module-CPANTS-Analyse
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-CPANTS-Analyse-1.02-7.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-CPANTS-Analyse-1.02-7.fc44.noarch.rpm
checksum_type: sha256
description:
  CPANTS is an acronym for CPAN Testing Service. The goals of the CPANTS project
  are to provide some sort of quality measure (called "Kwalitee") and lots of
  metadata for all distributions on CPAN.


pkgId: 505a1e27b0059b0c708f5dda9a91fd8b91adbd7849db58e4f12af735b7ffe159
name: perl-Module-CPANfile
arch: noarch
version: 1.1004
epoch: 0
release: 24.fc44
summary: Parse cpanfile
url: https://metacpan.org/release/Module-CPANfile
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-CPANfile-1.1004-24.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-CPANfile-1.1004-24.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::CPANfile is a tool to handle cpanfile format to load application
  specific dependencies, not just for CPAN distributions.


pkgId: 6051a8c56b105111d150006cbd446dc9cd369ab0a6e5f7a086d4e77bb921878b
name: perl-Module-CoreList
arch: noarch
version: 5.20260119
epoch: 1
release: 1.fc44
summary: What modules are shipped with versions of perl
url: https://metacpan.org/release/Module-CoreList
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-CoreList-5.20260119-1.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-CoreList-5.20260119-1.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::CoreList provides information on which core and dual-life modules
  are shipped with each version of perl.


pkgId: 3e35eb7962c00215b077a91e39c074f38cea56bf80a1b827ac6cdfa1d0c9ae0d
name: perl-Module-CoreList-tests
arch: noarch
version: 5.20260119
epoch: 1
release: 1.fc44
summary: Tests for perl-Module-CoreList
url: https://metacpan.org/release/Module-CoreList
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-CoreList-5.20260119-1.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-CoreList-tests-5.20260119-1.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Module-CoreList-5.20260119. Execute them
  with "/usr/libexec/perl-Module-CoreList/test".


pkgId: 48be2d5e0f82e440db0b11e365f6b2c4d13de3aec7f86eed5960888f7c3bbcf1
name: perl-Module-CoreList-tools
arch: noarch
version: 5.20260119
epoch: 1
release: 1.fc44
summary: Tool for listing modules shipped with perl
url: https://metacpan.org/release/Module-CoreList
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-CoreList-5.20260119-1.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-CoreList-tools-5.20260119-1.fc44.noarch.rpm
checksum_type: sha256
description:
  This package provides a corelist(1) tool which can be used to query what
  modules were shipped with given perl version.


pkgId: bb7bebe32c5d9ccecbe5c3ea0e228d056533234c50f1d3bfb25d81179e21586c
name: perl-Module-Extract-Namespaces
arch: noarch
version: 1.026
epoch: 0
release: 3.fc44
summary: Extract the package declarations from a module
url: https://metacpan.org/release/Module-Extract-Namespaces
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Extract-Namespaces-1.026-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Extract-Namespaces-1.026-3.fc44.noarch.rpm
checksum_type: sha256
description:
  This module extracts package declarations from Perl code without running the
  code.

  It does not extract:

   * Packages declared dynamically (e.g. in eval)
   * Packages created as part of a fully qualified variable name


pkgId: 3cfdd51cf9ce6f11ac9133a7eb646a985ac774ea65540aa6bf453b788e20cb42
name: perl-Module-Extract-Use
arch: noarch
version: 1.054
epoch: 0
release: 3.fc44
summary: Pull out the modules a module explicitly uses
url: https://metacpan.org/release/Module-Extract-Use
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Extract-Use-1.054-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Extract-Use-1.054-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Extract the names of the modules used in a file using a static analysis. Since
  this module does not run code, it cannot find dynamic uses of modules, such as
  eval "require $class". It only reports modules that the file loads directly.
  Modules loaded with parent or base, for instance, will be in the import list
  for those pragmas but won't have separate entries in the data this module
  returns.


pkgId: 9e404742d458404e53f7e5e130cf3078d614ba6145de80b5e2bb3f878cd99525
name: perl-Module-Extract-VERSION
arch: noarch
version: 1.119
epoch: 0
release: 3.fc44
summary: Extract a module version without running code
url: https://metacpan.org/release/Module-Extract-VERSION
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Extract-VERSION-1.119-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Extract-VERSION-1.119-3.fc44.noarch.rpm
checksum_type: sha256
description:
  This module lets you pull out of module source code the version number for the
  module. It assumes that there is only one $VERSION in the file.


pkgId: a92abd373b80c0a998326a4454b9f2691dfff5d01f64586da791ccff7685c2a9
name: perl-Module-ExtractUse
arch: noarch
version: 0.345
epoch: 0
release: 9.fc44
summary: Find out which modules are used
url: https://metacpan.org/release/Module-ExtractUse
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-ExtractUse-0.345-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-ExtractUse-0.345-9.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::ExtractUse is basically a Parse::RecDescent grammar to parse Perl
  code. It tries very hard to find all modules (whether pragmas, Core, or
  from CPAN) used by the parsed code.


pkgId: d421af051f753864c5886058ae0381684828c070f39f61b15a82b1ecb5c06783
name: perl-Module-Faker
arch: noarch
version: 0.027
epoch: 0
release: 5.fc44
summary: Build fake dists for testing CPAN tools
url: https://metacpan.org/release/Module-Faker
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Faker-0.027-5.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Faker-0.027-5.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Faker is a tool for building fake CPAN modules and, perhaps more
  importantly, fake CPAN distributions. These are useful for running tools
  that operate against CPAN distributions without having to use real CPAN
  distributions. This is much more useful when testing an entire CPAN
  instance, rather than a single distribution, for which see CPAN::Faker.


pkgId: f3f70eef2f0a1caf1a7a70246f9bdd22b03de723713c25b4cea8d4da8ab72882
name: perl-Module-Find
arch: noarch
version: 0.17
epoch: 0
release: 3.fc44
summary: Find and use installed modules in a (sub)category
url: https://metacpan.org/release/Module-Find
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Find-0.17-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Find-0.17-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Find lets you find and use modules in categories. This can be very
  useful for auto-detecting driver or plug-in modules. You can differentiate
  between looking in the category itself or in all subcategories.


pkgId: b36bedb457993272faf61d619dfcd9f443e65a4c984be6fa5308fc05185ee70d
name: perl-Module-Implementation
arch: noarch
version: 0.09
epoch: 0
release: 43.fc44
summary: Loads one of several alternate underlying implementations for a module
url: https://metacpan.org/release/perl-Module-Implementation
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Implementation-0.09-43.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Implementation-0.09-43.fc44.noarch.rpm
checksum_type: sha256
description:
  This module abstracts out the process of choosing one of several underlying
  implementations for a module. This can be used to provide XS and pure Perl
  implementations of a module, or it could be used to load an implementation
  for a given OS or any other case of needing to provide multiple
  implementations.

  This module is only useful when you know all the implementations ahead of
  time. If you want to load arbitrary implementations then you probably want
  something like a plugin system, not this module.


pkgId: ba7e0f764eec78291818e42993c1e0d2b9b3c37b38c5f25c04535b9c162fb1f5
name: perl-Module-Info
arch: noarch
version: 0.39
epoch: 0
release: 4.fc44
summary: Information about Perl modules
url: https://metacpan.org/release/Module-Info
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Info-0.39-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Info-0.39-4.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Info gives you information about Perl modules without actually loading
  the module. It isn't actually specific to modules and should work on any perl
  code.


pkgId: aa0b4020161a97e52b667f02c7dd27d7387e82ded31b0c601e3c74c816453cd3
name: perl-Module-Inspector
arch: noarch
version: 1.05
epoch: 0
release: 49.fc44
summary: Integrated API for inspecting Perl distributions
url: https://metacpan.org/release/Module-Inspector
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Inspector-1.05-49.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Inspector-1.05-49.fc44.noarch.rpm
checksum_type: sha256
description:
  An entire ecosystem of CPAN modules exist around the files and formats
  relating to the CPAN itself. Parsers and object models for various
  different types of files have been created over the years by various people
  for various projects.


pkgId: bcede5c6be7201e7bce36ac8e1a700b90310e32dd4a19d487fc83bd738ed20ef
name: perl-Module-Install
arch: noarch
version: 1.21
epoch: 0
release: 8.fc44
summary: Standalone, extensible Perl module installer
url: https://metacpan.org/release/Module-Install
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-1.21-8.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-1.21-8.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Install is a package for writing installers for CPAN (or CPAN-like)
  distributions that are clean, simple, minimalist, act in a strictly correct
  manner with ExtUtils::MakeMaker, and will run on any Perl installation
  version 5.005 or newer.


pkgId: a8567eb8bb31715837cbd3b5f1d6cac0ee2884c1087120b7959dd96825d6c076
name: perl-Module-Install-AuthorRequires
arch: noarch
version: 0.02
epoch: 0
release: 39.fc44
summary: Declare author-only dependencies
url: https://metacpan.org/release/Module-Install-AuthorRequires
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-AuthorRequires-0.02-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-AuthorRequires-0.02-39.fc44.noarch.rpm
checksum_type: sha256
description:
  Modules often have optional requirements, for example dependencies that
  are useful for (optional) tests, but not required for the module to
  work properly.

  Simply using this module "author_requires" command allows to specify such
  developer specific dependencies in a proper way.


pkgId: 88fe6c39df387de57bcaea664a79c5c34406f29d2250660717305e4fd74e84ab
name: perl-Module-Install-AuthorRequires-tests
arch: noarch
version: 0.02
epoch: 0
release: 39.fc44
summary: Tests for perl-Module-Install-AuthorRequires
url: https://metacpan.org/release/Module-Install-AuthorRequires
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-AuthorRequires-0.02-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-AuthorRequires-tests-0.02-39.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Module-Install-AuthorRequires. Execute them
  with "/usr/libexec/perl-Module-Install-AuthorRequires/test".


pkgId: d1202e60ef4f3889b15970585c8c17bc63ec75525969d64cadf43ce21faba331
name: perl-Module-Install-AuthorTests
arch: noarch
version: 0.002
epoch: 0
release: 39.fc44
summary: Designate tests only run by module authors
url: https://metacpan.org/release/Module-Install-AuthorTests
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-AuthorTests-0.002-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-AuthorTests-0.002-39.fc44.noarch.rpm
checksum_type: sha256
description:
  Plug-in for Perl Module::Install package to declare tests in ./xt directory
  should be run only if the module is being built by an author.


pkgId: 68f34b94fcda1bfae6b648632e7e961404f17e989cb0fbd0b04ed7a3d9d21f4d
name: perl-Module-Install-Authority
arch: noarch
version: 0.03
epoch: 0
release: 33.fc44
summary: Add an x_authority key to META.yml
url: https://metacpan.org/release/Module-Install-Authority
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-Authority-0.03-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-Authority-0.03-33.fc44.noarch.rpm
checksum_type: sha256
description:
  If you upload a distribution which contains an x_authority key in the
  META.yml then PAUSE will assign 'firstcome' permissions on any packages in
  that distribution to the user given by the x_authority key (and assign co-
  maintenance to the uploader).

  This makes coordination (and maintenance sharing) much easier for large
  CPAN distributions, or those maintained by a pool of people.


pkgId: 601e47698abab34c21374a47f27a1eed9bd0fb7a9a2564b59b4721d152729a20
name: perl-Module-Install-AutoLicense
arch: noarch
version: 0.10
epoch: 0
release: 26.fc44
summary: Module::Install extension to automatically generate LICENSE files
url: https://metacpan.org/release/Module-Install-AutoLicense
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-AutoLicense-0.10-26.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-AutoLicense-0.10-26.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Install::AutoLicense is a Module::Install extension that generates
  a LICENSE file automatically whenever the author runs Makefile.PL. On the
  user side it does nothing.


pkgId: 4e263d529fbd75f838b37342c353a9a25b47752e0ca066aa4b7e2d2a16cf9294
name: perl-Module-Install-AutoManifest
arch: noarch
version: 0.003
epoch: 0
release: 39.fc44
summary: The module generates MANIFEST automatically
url: https://metacpan.org/release/Module-Install-AutoManifest
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-AutoManifest-0.003-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-AutoManifest-0.003-39.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is extension to Module::Install. It adds behavior for
  automatically generating MANIFEST.


pkgId: fe17a8c352ddc0e25a876441ee7b4d2f9036586150bccfcdc07b226530f81f24
name: perl-Module-Install-CheckLib
arch: noarch
version: 0.14
epoch: 0
release: 13.fc44
summary: Module::Install extension to check that a library is available
url: https://metacpan.org/release/Module-Install-CheckLib
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-CheckLib-0.14-13.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-CheckLib-0.14-13.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Install::CheckLib is a Module::Install extension that integrates
  Devel::CheckLib so that CPAN authors may stipulate which particular C
  library and its headers they want available and to exit the Makefile.PL
  gracefully if they aren't.


pkgId: 9f1ae42b2c175b8c0728ccb0c2b6ab0071116cd35fe46b5faddeb31a019354df
name: perl-Module-Install-CheckLib-tests
arch: noarch
version: 0.14
epoch: 0
release: 13.fc44
summary: Tests for perl-Module-Install-CheckLib
url: https://metacpan.org/release/Module-Install-CheckLib
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-CheckLib-0.14-13.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-CheckLib-tests-0.14-13.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Module-Install-CheckLib. Execute them
  with "/usr/libexec/perl-Module-Install-CheckLib/test".


pkgId: 28e403a91312c4142ccb7864aab336ed1a1916213f37775209f515578fd76e66
name: perl-Module-Install-Contributors
arch: noarch
version: 0.001
epoch: 0
release: 28.fc44
summary: Add an x_contributors section to your META.yml
url: https://metacpan.org/release/Module-Install-Contributors
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-Contributors-0.001-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-Contributors-0.001-28.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a plugin for Module::Install. It adds an x_contributors section to
  your META.yml file. This is an array of strings, which should normally be in
  "Name <email>" format, that is passed to contributors() function in
  a Makefile.PL.

rpm_license:
  (GPL-1.0-or-later OR Artistic-1.0-Perl) AND LicenseRef-Callaway-CC-BY-SA AND LicenseRef-Callaway-Public-Domain


pkgId: 6d3e9ec15b750272b7e74f9065f150150025520f33975f999a372def2241fc8e
name: perl-Module-Install-Copyright
arch: noarch
version: 0.009
epoch: 0
release: 28.fc44
summary: Package a COPYRIGHT file with a distribution
url: https://metacpan.org/release/Module-Install-Copyright
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-Copyright-0.009-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-Copyright-0.009-28.fc44.noarch.rpm
checksum_type: sha256
description:
  This Module::Install plug-in extracts copyright and licensing information from
  embedded POD and/or RDF meta-data included in the distribution, and outputs it
  as a text file called COPYRIGHT which should roughly conform to the Debian
  copyright file format.

rpm_license:
  (GPL-1.0-or-later OR Artistic-1.0-Perl) AND LicenseRef-Callaway-CC-BY-SA AND LicenseRef-Callaway-Public-Domain


pkgId: 9d0e23c0bec846685920dd533df1e98bd0b57436f2cbf2b9796f63833052b7b5
name: perl-Module-Install-DOAP
arch: noarch
version: 0.006
epoch: 0
release: 27.fc44
summary: Generate META.yml data from DOAP
url: https://metacpan.org/release/Module-Install-DOAP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-DOAP-0.006-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-DOAP-0.006-27.fc44.noarch.rpm
checksum_type: sha256
description:
  This Module::Install plugin generates your META.yml file from RDF data
  (especially DOAP) in your distribution's "meta" directory.


pkgId: bfc53504b3b3bfb19d82325719e282b0e1cf68e49b5c1d0c7620f7273ec321d7
name: perl-Module-Install-DOAPChangeSets
arch: noarch
version: 0.206
epoch: 0
release: 27.fc44
summary: Write your distribution change log in RDF
url: https://metacpan.org/release/Module-Install-DOAPChangeSets
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-DOAPChangeSets-0.206-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-DOAPChangeSets-0.206-27.fc44.noarch.rpm
checksum_type: sha256
description:
  This package allows you to write your Changes file in Turtle or RDF/XML and
  autogenerate a human-readable text file.


pkgId: 637dd7c94d0142ac028564d67e8bc375aae27f5d8d236b9478fb29574b2e7eec
name: perl-Module-Install-ExtraTests
arch: noarch
version: 0.008
epoch: 0
release: 37.fc44
summary: Ignorable, contextual test support for Module::Install
url: https://metacpan.org/release/Module-Install-ExtraTests
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-ExtraTests-0.008-37.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-ExtraTests-0.008-37.fc44.noarch.rpm
checksum_type: sha256
description:
  This allows extra_tests; to be declared in Makefile.PL, indicating that the
  test files found in the directory ./xt should be run only in certain
  instances:

    ./xt/author  - run when the tests are being run in an author's working copy
    ./xt/smoke   - run when the dist is being smoked (AUTOMATED_TESTING=1)
    ./xt/release - run during "make disttest"


pkgId: 2109a71ac96cf2754f891d28e8c97806d8673091819837e61a4b7ad3f45260e6
name: perl-Module-Install-GithubMeta
arch: noarch
version: 0.30
epoch: 0
release: 32.fc44
summary: A Module::Install extension to include GitHub meta information in META.yml
url: https://metacpan.org/release/Module-Install-GithubMeta
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-GithubMeta-0.30-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-GithubMeta-0.30-32.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Install::GithubMeta is a Module::Install extension
  to include GitHub (http://github.com) meta information in
  'META.yml'.  It automatically detects if the distribution
  directory is under 'git' version control and whether the
  'origin' is a GitHub repository; if so, it will set the
  'repository' and 'homepage' meta in 'META.yml' to the
  appropriate URLs for GitHub.


pkgId: a7f49506f18d361896d52bc9781894b11bafac8504335d55041f6478689457dc
name: perl-Module-Install-ManifestSkip
arch: noarch
version: 0.24
epoch: 0
release: 33.fc44
summary: Generate a MANIFEST.SKIP file
url: https://metacpan.org/release/Module-Install-ManifestSkip
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-ManifestSkip-0.24-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-ManifestSkip-0.24-33.fc44.noarch.rpm
checksum_type: sha256
description:
  This module generates a MANIFEST.SKIP file for you (using
  Module::Manifest::Skip) that contains the common files that people do not
  want in their MANIFEST files. The SKIP file is generated each time that you
  (the module author) run Makefile.PL.


pkgId: ae8d1a924bffe272f329c44ba3d115e4e52d27b948d3c4eb950d857953fb7370
name: perl-Module-Install-RDF
arch: noarch
version: 0.009
epoch: 0
release: 29.fc44
summary: Advanced meta-data for your distribution
url: https://metacpan.org/release/Module-Install-RDF
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND CC-BY-SA-2.0-UK
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-RDF-0.009-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-RDF-0.009-29.fc44.noarch.rpm
checksum_type: sha256
description:
  These Perl modules read all the RDF files it can find in the distribution's
  "meta" directory and expose them for other modules to make use of them. They
  also allow you to write out a combined graph using Turtle.


pkgId: c46d50b77a284887a548406cb4fe696f839cd67a1e43b178bfbff83bb600487c
name: perl-Module-Install-ReadmeFromPod
arch: noarch
version: 0.30
epoch: 0
release: 30.fc44
summary: Module::Install extension to automatically convert POD to a README
url: https://metacpan.org/release/Module-Install-ReadmeFromPod
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-ReadmeFromPod-0.30-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-ReadmeFromPod-0.30-30.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Install::ReadmeFromPod is a Module::Install extension that
  generates a README file automatically from an indicated file containing
  POD, whenever the author runs Makefile.PL. Several output formats are
  supported: plain-text, HTML, PDF or manual page.


pkgId: a1629c3c6e8c8bb0bef5e32b9f7459576f46970b03e12f47345bb86d888de2e8
name: perl-Module-Install-ReadmeMarkdownFromPod
arch: noarch
version: 0.04
epoch: 0
release: 26.fc44
summary: Create README.mkdn from POD
url: https://metacpan.org/release/Module-Install-ReadmeMarkdownFromPod
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-ReadmeMarkdownFromPod-0.04-26.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-ReadmeMarkdownFromPod-0.04-26.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Install::ReadmeMarkdownFromPod is a Module::Install extension that
  generates a README.mkdn file automatically from an indicated file
  containing POD whenever the author runs Makefile.PL. This file is used by
  GitHub to display nicely formatted information about a repository.


pkgId: dfeb6e7addc9f075baebf5058ae786ccb347ed31fff9045b0dc7663ea547390d
name: perl-Module-Install-Repository
arch: noarch
version: 0.08
epoch: 0
release: 5.fc44
summary: Automatically sets repository URL from Svn/Svk/Git checkout
url: https://metacpan.org/release/Module-Install-Repository
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-Repository-0.08-5.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-Repository-0.08-5.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Install::Repository is a Module::Install plugin to automatically
  figure out repository URL and set it via repository(), which then will be
  added to resources under META.yml.


pkgId: 6cab2239d16364b5de27ff89cedb48806467860557680394f5eeb1947aaeb15f
name: perl-Module-Install-TestBase
arch: noarch
version: 0.86
epoch: 0
release: 37.fc44
summary: Module::Install support for Test::Base
url: https://metacpan.org/release/Module-Install-TestBase
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-TestBase-0.86-37.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-TestBase-0.86-37.fc44.noarch.rpm
checksum_type: sha256
description:
  This Perl module adds the use_test_base directive to Module::Install. Now you
  can get full Test-Base support for you module with no external dependency on
  Test::Base.


pkgId: 6077f4b3aa4827fb3ec5bd81bb29f2c1c63b96946d994cae727bd83ebefc5303
name: perl-Module-Install-TestBase-tests
arch: noarch
version: 0.86
epoch: 0
release: 37.fc44
summary: Tests for perl-Module-Install-TestBase
url: https://metacpan.org/release/Module-Install-TestBase
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-TestBase-0.86-37.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-TestBase-tests-0.86-37.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Module-Install-TestBase. Execute them
  with "/usr/libexec/perl-Module-Install-TestBase/test".


pkgId: 88750c02353ccec9fc71e96d36dd844fdf36145c783996e159e4c4382ec5fcf3
name: perl-Module-Install-TestTarget
arch: noarch
version: 0.19
epoch: 0
release: 39.fc44
summary: Assembles custom test targets for make
url: https://metacpan.org/release/Module-Install-TestTarget
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-TestTarget-0.19-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-TestTarget-0.19-39.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Install::TestTarget creates make test variations with code
  snippets. This helps module developers to test their distributions with
  various conditions.


pkgId: db5b553ce7ec8805c6814e7ece9bd8f6ccbd4d74e9a0767927d2caf6d8f0ae70
name: perl-Module-Install-TestTarget-tests
arch: noarch
version: 0.19
epoch: 0
release: 39.fc44
summary: Tests for perl-Module-Install-TestTarget
url: https://metacpan.org/release/Module-Install-TestTarget
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-TestTarget-0.19-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-TestTarget-tests-0.19-39.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Module-Install-TestTarget. Execute them
  with "/usr/libexec/perl-Module-Install-TestTarget/test".


pkgId: 70a1a8e659c148680192a7b06bf17e8b9a8abd4639ac96671c0f421abc245883
name: perl-Module-Install-TrustMetaYml
arch: noarch
version: 0.003
epoch: 0
release: 28.fc44
summary: Trusts META.yml list of dependencies
url: https://metacpan.org/release/Module-Install-TrustMetaYml
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND LicenseRef-Callaway-CC-BY-SA
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-TrustMetaYml-0.003-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-TrustMetaYml-0.003-28.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a Module::Install plugin that generates MYMETA.yml by simply
  passing through the dependencies from META.yml. It does nothing when run from
  the module author's development copy.


pkgId: 4adf67b584cf3ce3dbb577f0857743256cc3b7d95d4f49aadd55f938940fb416
name: perl-Module-Install-XSUtil
arch: noarch
version: 0.45
epoch: 0
release: 34.fc44
summary: Utility functions for XS modules
url: https://metacpan.org/release/Module-Install-XSUtil
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Install-XSUtil-0.45-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Install-XSUtil-0.45-34.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Install::XSUtil provides a set of utilities to setup distributions
  which include or depend on an XS module.


pkgId: ca125008526e1e3989f9c350b483f4a8467bd6d1f148d5fb72c670bbe5e3499d
name: perl-Module-Load
arch: noarch
version: 0.36
epoch: 1
release: 521.fc44
summary: Run-time require of both modules and files
url: https://metacpan.org/release/Module-Load
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Load-0.36-521.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Load-0.36-521.fc44.noarch.rpm
checksum_type: sha256
description:
  If you consult "perldoc -f require" you will see that "require" will behave
  differently when given a bare-word or a string. In the case of a string,
  "require" assumes you are wanting to load a file. But in the case of
  a bare-word, it assumes you mean a module.

  This gives nasty overhead when you are trying to dynamically require modules
  at run-time, since you will need to change the module notation to a file
  notation fitting the particular platform you are on.

  "load" eliminates the need for this overhead and will just DWYM.


pkgId: d86d432dab05b68bbb77e77574de878cf1bce03a47c3af0b1c9b967e45a0ac7a
name: perl-Module-Load-Conditional
arch: noarch
version: 0.74
epoch: 0
release: 521.fc44
summary: Looking up module information / loading at run-time
url: https://metacpan.org/release/Module-Load-Conditional
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-01.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Load-Conditional-0.74-521.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Load-Conditional-0.74-521.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides simple ways to query and possibly load any of the modules
  you have installed on your system during run-time.


pkgId: 43516d481b72dca73a0ee6a856339bd5181542f1e404da4f2ed92dfc6fc4adb6
name: perl-Module-Load-Conditional-tests
arch: noarch
version: 0.74
epoch: 0
release: 521.fc44
summary: Tests for perl-Module-Load-Conditional
url: https://metacpan.org/release/Module-Load-Conditional
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-01.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Load-Conditional-0.74-521.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Load-Conditional-tests-0.74-521.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Module-Load-Conditional. Execute them
  with "/usr/libexec/perl-Module-Load-Conditional/test".


pkgId: 6608d8585c9c15567a5fbeadd6bfc646734fb63aca690dddc092d0abf9bb4249
name: perl-Module-Loaded
arch: noarch
version: 0.08
epoch: 1
release: 522.fc44
summary: Mark modules as loaded or unloaded
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-5.42.0-522.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Loaded-0.08-522.fc44.noarch.rpm
checksum_type: sha256
description:
  When testing applications, often you find yourself needing to provide
  functionality in your test environment that would usually be provided by
  external modules. Rather than munging the %INC by hand to mark these external
  modules as loaded, so they are not attempted to be loaded by perl, this module
  offers you a very simple way to mark modules as loaded and/or unloaded.


pkgId: 1fd1e4b78eb803ed25537f43cbc99010be1770d24b6e2ae00224aad654be6b8d
name: perl-Module-Locate
arch: noarch
version: 1.80
epoch: 0
release: 29.fc44
summary: Locate Perl modules in the same fashion as "require" and "use"
url: https://metacpan.org/release/Module-Locate
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Locate-1.80-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Locate-1.80-29.fc44.noarch.rpm
checksum_type: sha256
description:
  Using "locate()", return the path that "require" would find for a given
  module or file name (it can also return a file handle if a reference in @INC
  has been used).  This means you can test for the existence, or find the
  path for, modules without having to evaluate the code they contain.

  This module also comes with accompanying utility functions that are used
  within the module itself (except for "get_source") and are available for
  import.


pkgId: 755994fb451efd545546608d24ed35068f0ff148fe81aa5a2279771d708c3fc8
name: perl-Module-Manifest
arch: noarch
version: 1.09
epoch: 0
release: 25.fc44
summary: Parse and examine a Perl distribution MANIFEST file
url: https://metacpan.org/release/Module-Manifest
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Manifest-1.09-25.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Manifest-1.09-25.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Manifest can load a MANIFEST file that comes in a Perl distribution
  tarball, examine the contents, and perform some simple tasks. It can also load
  the MANIFEST.SKIP file and check that.


pkgId: 871bcde3ef8f75657caed5d760246a44fb1296ae4cc35664a1f8db53a18eb8bf
name: perl-Module-Manifest-Skip
arch: noarch
version: 0.23
epoch: 0
release: 35.fc44
summary: MANIFEST.SKIP Manangement for Modules
url: https://metacpan.org/release/Module-Manifest-Skip
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Manifest-Skip-0.23-35.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Manifest-Skip-0.23-35.fc44.noarch.rpm
checksum_type: sha256
description:
  CPAN module authors use a MANIFEST.SKIP file to exclude certain well known
  files from getting put into a generated MANIFEST file, which would cause them
  to go into the final distribution package.

  The packaging tools try to automatically skip things for you, but if you add
  one of your own entries, you have to add all the common ones yourself.  This
  module attempts to make all of this boring process as simple and reliable as
  possible.


pkgId: 7cc959a7993d6dc01e5317dd473023d61d516c02c0bd7d3d24d0838cf85d3661
name: perl-Module-Manifest-Skip-tests
arch: noarch
version: 0.23
epoch: 0
release: 35.fc44
summary: Tests for perl-Module-Manifest-Skip
url: https://metacpan.org/release/Module-Manifest-Skip
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Manifest-Skip-0.23-35.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Manifest-Skip-tests-0.23-35.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Module-Manifest-Skip. Execute them
  with "/usr/libexec/perl-Module-Manifest-Skip/test".


pkgId: 5dbbc043f3552681373c34e5d986a8df8d5fd4f23828bdb30d1e36c58cb573fe
name: perl-Module-Mask
arch: noarch
version: 0.06
epoch: 0
release: 39.fc44
summary: Pretend certain modules are not installed
url: https://metacpan.org/release/Module-Mask
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Mask-0.06-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Mask-0.06-39.fc44.noarch.rpm
checksum_type: sha256
description:
  Sometimes you need to test what happens when a given module is not
  installed. This module provides a way of temporarily hiding installed
  modules from perl's require mechanism. The Module::Mask object adds itself
  to @INC and blocks require calls to restricted modules.


pkgId: a9d297047330a9232689ec5da55d3c0cdb846bb5d7fa43080c8856efedc86b6a
name: perl-Module-Math-Depends
arch: noarch
version: 0.02
epoch: 0
release: 48.fc44
summary: Convenience object for manipulating module dependencies
url: https://metacpan.org/release/Module-Math-Depends
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Math-Depends-0.02-48.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Math-Depends-0.02-48.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a small convenience module created originally as part of
  Module::Inspector but released separately, in the hope that people might
  find it useful in other contexts.


pkgId: aad183d145dac007355666fecb0107fff19c40a58f428f00b9d6de36796b7729
name: perl-Module-Metadata
arch: noarch
version: 1.000038
epoch: 0
release: 521.fc44
summary: Gather package and POD information from perl module files
url: https://metacpan.org/release/Module-Metadata
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Metadata-1.000038-521.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Metadata-1.000038-521.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a standard way to gather metadata about a .pm file
  without executing unsafe code.


pkgId: 789fbbdba30850cd6765414863d02acd552e4c1400186173a3aedaf3a1cf8c31
name: perl-Module-Metadata-Changes
arch: noarch
version: 2.12
epoch: 0
release: 27.fc44
summary: Manage a module's machine-readable Changes/CHANGES file
url: https://metacpan.org/release/Module-Metadata-Changes
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Metadata-Changes-2.12-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Metadata-Changes-2.12-27.fc44.noarch.rpm
checksum_type: sha256
description:
  Module::Metadata::Changes is a pure Perl module. It allows you to convert
  old-style Changes/CHANGES files, and to read and write Changelog.ini files.


pkgId: 45f92f761eaf6fafa13c73ec1714e90cd0953bcf55c037696bc3a55f30313127
name: perl-Module-Package
arch: noarch
version: 0.30
epoch: 0
release: 39.fc44
summary: Postmodern Perl Module Packaging
url: https://metacpan.org/release/Module-Package
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Package-0.30-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Package-0.30-39.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a drop-in replacement for Module::Install. It does everything
  Module::Install does, but just a bit better.


pkgId: b20339fa35db45006162011718d814ca777ed9a9a234345fda9990d743a9c010
name: perl-Module-Package-Au
arch: noarch
version: 2
epoch: 0
release: 33.fc44
summary: Reusable Module::Install bits
url: https://metacpan.org/release/Module-Package-Au
rpm_license: CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Package-Au-2-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Package-Au-2-33.fc44.noarch.rpm
checksum_type: sha256
description:
  This module defines a set of standard configurations for Makefile.PL
  files based on Module::Package.


pkgId: addadca85e0cb8ee6339c451ef1360fe5ba5c5de7ce110746a34e3fe184a2521
name: perl-Module-Path
arch: noarch
version: 0.19
epoch: 0
release: 32.fc44
summary: Get the full path to a locally installed module
url: https://metacpan.org/release/Module-Path
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Path-0.19-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Path-0.19-32.fc44.noarch.rpm
checksum_type: sha256
description:
  This Module::Path Perl module provides a single function, module_path(), which
  takes a module name and finds the first directory in your @INC path where the
  module is installed locally. It returns the full path to that file, resolving
  any symbolic links.


pkgId: df137420fd9963b255822240698ec006fb79499b90b5d4d2b86b926ca0f120d7
name: perl-Module-Pluggable
arch: noarch
version: 6.3
epoch: 2
release: 4.fc44
summary: Automatically give your module the ability to have plugins
url: https://metacpan.org/release/Module-Pluggable
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Pluggable-6.3-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Pluggable-6.3-4.fc44.noarch.rpm
checksum_type: sha256
description:
  This package provides a simple but, hopefully, extensible way of having
  'plugins' for your module. Essentially all it does is export a method into
  your name space that looks through a search path for .pm files and turn those
  into class names. Optionally it instantiates those classes for you.


pkgId: d005301f4f3f9c271c696abf99ea3629453fef9d68c245c29218a389c5dc457f
name: perl-Module-Pluggable-Ordered
arch: noarch
version: 1.5
epoch: 0
release: 47.fc44
summary: Call module plugins in a specified order
url: https://metacpan.org/release/Module-Pluggable-Ordered
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Pluggable-Ordered-1.5-47.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Pluggable-Ordered-1.5-47.fc44.noarch.rpm
checksum_type: sha256
description:
  This module behaves exactly the same as Module::Pluggable, supporting
  all of its options, but also mixes in the call_plugins and
  plugins_ordered methods to your class. call_plugins acts a little like
  Class::Trigger; it takes the name of a method, and some parameters.
  Let's say we call it like so:


pkgId: 91f9e51e4f8839b24d120991a3c93c97eef73bb80b3ab2a3c278587c2ca8a0d1
name: perl-Module-Reader
arch: noarch
version: 0.003003
epoch: 0
release: 26.fc44
summary: Read the source of a module like perl does
url: https://metacpan.org/release/Module-Reader
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Reader-0.003003-26.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Reader-0.003003-26.fc44.noarch.rpm
checksum_type: sha256
description:
  Reads the content of perl modules the same way perl does. This includes
  reading modules available only by @INC hooks, or filtered through them.


pkgId: 9b55fe0dd8229ec1d4e2546aa782efba3c33c35fdf78ce6904b75807ad36cb4a
name: perl-Module-Refresh
arch: noarch
version: 0.18
epoch: 0
release: 12.fc44
summary: Refresh %INC files when updated on disk
url: https://metacpan.org/release/Module-Refresh
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-35.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Refresh-0.18-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Refresh-0.18-12.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a generalization of the functionality provided by
  Apache::StatINC. It's designed to make it easy to do simple iterative
  development when working in a persistent environment.


pkgId: 7c6226a1fdba9715cba5bc75bfbced69162a2617d3ef6aef5c404a878400ae82
name: perl-Module-Runtime
arch: noarch
version: 0.018
epoch: 0
release: 3.fc44
summary: Runtime module handling
url: https://metacpan.org/release/Module-Runtime
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Runtime-0.018-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Runtime-0.018-3.fc44.noarch.rpm
checksum_type: sha256
description:
  The functions exported by this module deal with runtime handling of Perl
  modules, which are normally handled at compile time.


pkgId: 3caacd653873c3d13d60ce3f79f31b6508a1b988cc1a52c3af4238b5be7cdd81
name: perl-Module-Runtime-Conflicts
arch: noarch
version: 0.003
epoch: 0
release: 28.fc44
summary: Provide information on conflicts for Module::Runtime
url: https://metacpan.org/release/Module-Runtime-Conflicts
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Runtime-Conflicts-0.003-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Runtime-Conflicts-0.003-28.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides conflicts checking for Module::Runtime, which had a
  recent release that broke some versions of Moose. It is called from
  Moose::Conflicts and moose-outdated.


pkgId: 16bd7467c4744ee103a5be3e68c6eaccc1196f18c54bd634e44c1baa677a4e01
name: perl-Module-ScanDeps
arch: noarch
version: 1.37
epoch: 0
release: 4.fc44
summary: Recursively scan Perl code for dependencies
url: https://metacpan.org/release/Module-ScanDeps
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-ScanDeps-1.37-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-ScanDeps-1.37-4.fc44.noarch.rpm
checksum_type: sha256
description:
  This module scans potential modules used by perl programs and returns a
  hash reference.  Its keys are the module names as they appear in %INC (e.g.
  Test/More.pm).  The values are hash references.


pkgId: f12551d57990b67236a154ad40054c01ea689faff3d48b4ee48aa891e4057dcb
name: perl-Module-Signature
arch: noarch
version: 0.93
epoch: 0
release: 3.fc44
summary: CPAN signature management utilities and modules
url: https://metacpan.org/release/Module-Signature
rpm_license: CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Signature-0.93-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Signature-0.93-3.fc44.noarch.rpm
checksum_type: sha256
description:
  This package contains a command line tool and module for checking and creating
  SIGNATURE files for Perl CPAN distributions.


pkgId: 2eca0fde99e7347c5c643ebfc4e2f06d91f68c1c3cb4968eb57fdb984e277c38
name: perl-Module-Starter
arch: noarch
version: 1.82
epoch: 1
release: 2.fc44
summary: A simple starter kit for any module
url: https://metacpan.org/release/Module-Starter
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Starter-1.82-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Starter-1.82-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a CPAN module/utility to assist in the creation of new modules in a
  sensible and sane fashion.  Unless you're interested in extending the
  functionality of this module, you should examine the documentation for
  'module-starter', for information on how to use this tool.

  It is noted that there are a number of extensions to this tool, including
  plugins to create modules using templates as recommended by Damian Conway's
  "Perl Best Practices" (O'Reilly, 2005).  (See also the package
  perl-Module-Starter-PBP for the aforementioned templates.)


pkgId: 38244ec5551941e869e99ad53c457d8089ba43b46b2ff4cf2ddef4dc1912f9e0
name: perl-Module-Starter-PBP
arch: noarch
version: 0.000003
epoch: 0
release: 51.fc44
summary: Create a module as recommended in "Perl Best Practices"
url: https://metacpan.org/release/Module-Starter-PBP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Starter-PBP-0.000003-51.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Starter-PBP-0.000003-51.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements a simple approach to creating modules and their support
  files, based on the Module::Starter approach.

  When used as a Module::Starter plugin, this module allows you to specify a
  simple directory of templates which are filled in with module-specific
  information, and thereafter form the basis of your new module.

  The default templates that this module initially provides are based on the
  recommendations in the book "Perl Best Practices".


pkgId: 3acac59e4701cdb7c2df2b0a56a3d45fdabe78518e9316afdca76518f476bb9a
name: perl-Module-Starter-Plugin-CGIApp
arch: noarch
version: 0.44
epoch: 0
release: 31.fc43
summary: Template based module starter for CGI apps
url: https://metacpan.org/release/Module-Starter-Plugin-CGIApp
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Starter-Plugin-CGIApp-0.44-31.fc43.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Starter-Plugin-CGIApp-0.44-31.fc43.noarch.rpm
checksum_type: sha256
description:
  This is a plugin for Module::Starter that builds you a skeleton
  CGI::Application module with all the extra files needed to package it for
  CPAN. You can customize the output using HTML::Template.


pkgId: 0dddf617a4266a6ed581894e4faa8adc36e8fb351a316324e82e3db0dd5920e3
name: perl-Module-Used
arch: noarch
version: 1.3.0
epoch: 0
release: 32.fc44
summary: Find modules loaded by Perl code without running it
url: https://metacpan.org/release/Module-Used
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Used-1.3.0-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Used-1.3.0-32.fc44.noarch.rpm
checksum_type: sha256
description:
  Modules are found statically based upon use and require statements. If use
  of the base or parent is found, both that module and the referenced ones
  will be returned. If Moose or Moose::Role are found, this will look for
  extends and with sugar will be looked for; presently, this will miss
  modules listed in parentheses.


pkgId: 554bf3754dbdddd9fff6b738298d4c03e1983a4a12d70e1fb5c5ca5d152effe6
name: perl-Module-Util
arch: noarch
version: 1.09
epoch: 0
release: 38.fc44
summary: Module name tools and transformations
url: https://metacpan.org/release/Module-Util
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-06.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Util-1.09-38.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Util-1.09-38.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a few useful functions for manipulating module names.
  Its main aim is to centralize some of the functions commonly used by
  modules that manipulate other modules in some way, like converting module
  names to relative paths.


pkgId: c001cd36dc718c5cb2f7ea34e42a028b93fc4ae3fe2b17f60bac453c841e7579
name: perl-Module-Versions-Report
arch: noarch
version: 1.06
epoch: 0
release: 50.fc44
summary: Report versions of all modules in memory
url: https://metacpan.org/release/Module-Versions-Report
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-Versions-Report-1.06-50.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-Versions-Report-1.06-50.fc44.noarch.rpm
checksum_type: sha256
description:
  If you add "use Module::Versions::Report;" to a program (especially
  handy if your program is one that demonstrates a bug in some module),
  then when the program has finished running, you well get a report
  detailing the all modules in memory, and noting the version of each
  (for modules that defined a $VERSION, at least).


pkgId: 456d790bf5d903e99a998174a31c44d704eddb8f2bbe52ae04f6046087bac0a0
name: perl-Module-cpmfile
arch: noarch
version: 0.006
epoch: 0
release: 11.fc44
summary: Parse cpmfile
url: https://metacpan.org/release/Module-cpmfile
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Module-cpmfile-0.006-11.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Module-cpmfile-0.006-11.fc44.noarch.rpm
checksum_type: sha256
description:
  cpmfile (usually saved as cpm.yml) is yet another file format for
  describing module dependencies, and Module::cpmfile helps you parse it.

  cpmfile will be used mainly by App::cpm.


pkgId: d9a4928f09d6aed0300347af2c358695779292cb57e20feede28bf442378add6
name: perl-MogileFS-Client
arch: noarch
version: 1.17
epoch: 0
release: 34.fc44
summary: Client library for the MogileFS distributed file system
url: https://metacpan.org/release/MogileFS-Client
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MogileFS-Client-1.17-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MogileFS-Client-1.17-34.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a client library for the MogileFS distributed file system.
  The class method 'new' creates a client object against a particular
  mogilefs tracker and domain. This object may then be used to store and
  retrieve content easily from MogileFS.


pkgId: 172e65ebf9d2e307df6a76561baf29c80618eeb18d1cea2e3fb598aa9e294b88
name: perl-Mojo-DOM58
arch: noarch
version: 3.002
epoch: 0
release: 3.fc44
summary: Minimalistic HTML/XML DOM parser with CSS selectors
url: https://metacpan.org/release/Mojo-DOM58
rpm_license: Artistic-2.0 AND CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojo-DOM58-3.002-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojo-DOM58-3.002-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Mojo::DOM58 is a minimalistic and relaxed pure-perl HTML/XML DOM parser. It
  supports the HTML Living Standard and Extensible Markup Language (XML) 1.0,
  and matching based on CSS3 selectors. It will even try to interpret broken
  HTML and XML, so you should not use it for validation.


pkgId: cd2714ee212c714ac05740f2e470363b3e38dcac79fce013dcd8cd10acdd78bd
name: perl-Mojo-IOLoop-ReadWriteProcess
arch: noarch
version: 1.1.0
epoch: 0
release: 3.fc44
summary: Execute external programs or internal code blocks as separate process
url: https://metacpan.org/release/Mojo-IOLoop-ReadWriteProcess/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojo-IOLoop-ReadWriteProcess-1.1.0-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojo-IOLoop-ReadWriteProcess-1.1.0-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Mojo::IOLoop::ReadWriteProcess is yet another process manager.
  It executes external programs or internal code blocks as separate process


pkgId: 197dba079f3df076df6001a9cc94c113a596ba1725bd86694f9f5dd5b64c5c09
name: perl-Mojo-JWT
arch: noarch
version: 1.01
epoch: 0
release: 4.fc44
summary: JSON Web Token the Mojo way
url: https://metacpan.org/release/Mojo-JWT
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojo-JWT-1.01-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojo-JWT-1.01-4.fc44.noarch.rpm
checksum_type: sha256
description:
  JSON Web Token is described in https://tools.ietf.org/html/rfc7519.
  Mojo::JWT implements that standard with an API that should feel familiar to
  Mojolicious users (though of course it is useful elsewhere). Indeed, JWT is
  much like Mojolicious::Sessions except that the result is a URL-safe text
  string rather than a cookie.


pkgId: bf21304dcfba4077e6a741e9dd91e64db034f47959100f96bb953432848cd62e
name: perl-Mojo-Pg
arch: noarch
version: 4.28
epoch: 0
release: 2.fc44
summary: Mojolicious ♥ PostgreSQL
url: https://metacpan.org/release/Mojo-Pg
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojo-Pg-4.28-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojo-Pg-4.28-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Mojo::Pg is a tiny wrapper around DBD::Pg that makes PostgreSQL a lot of
  fun to use with the Mojolicious real-time web framework. Perform queries
  blocking and non-blocking, use all SQL features PostgreSQL has to offer,
  generate CRUD queries from data structures, manage your database schema
  with migrations and build scalable real-time web applications with the
  publish/subscribe pattern.


pkgId: 1bcaabf93bf24669ff26ad778593d83c0b6f8baeb493d357a7a54fcf1b22e6d8
name: perl-Mojo-SQLite
arch: noarch
version: 3.009
epoch: 0
release: 12.fc44
summary: Tiny Mojolicious wrapper for SQLite
url: https://metacpan.org/release/Mojo-SQLite/
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojo-SQLite-3.009-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojo-SQLite-3.009-12.fc44.noarch.rpm
checksum_type: sha256
description:
  Mojo::SQLite is a tiny wrapper around DBD::SQLite that makes SQLite a lot
  of fun to use with the Mojolicious real-time web framework. Use all SQL
  features SQLite has to offer, generate CRUD queries from data structures,
  and manage your database schema with migrations.


pkgId: 2c7e304cb575fc762e46855978dddde19509e2768acbb88fa70cbebf4d337cea
name: perl-MojoX-Log-Log4perl
arch: noarch
version: 0.12
epoch: 0
release: 17.fc44
summary: Log::Log4perl logging for Mojo/Mojolicious
url: https://metacpan.org/release/MojoX-Log-Log4perl
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MojoX-Log-Log4perl-0.12-17.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MojoX-Log-Log4perl-0.12-17.fc44.noarch.rpm
checksum_type: sha256
description:
  MojoX::Log::Log4perl provides a Mojo::Log implementation that uses
  Log::Log4perl as the underlying log mechanism. It provides all the
  methods listed in Mojo::Log (and many more from Log4perl).


pkgId: 5c994e1105f0d8a1b163563697cbd7e346dfb3b7b58fb9331c51b3939f04e101
name: perl-MojoX-Log-Log4perl-Tiny
arch: noarch
version: 0.01
epoch: 0
release: 20.fc44
summary: Minimalistic Log4perl adapter for Mojolicious
url: https://metacpan.org/release/MojoX-Log-Log4perl-Tiny
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MojoX-Log-Log4perl-Tiny-0.01-20.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MojoX-Log-Log4perl-Tiny-0.01-20.fc44.noarch.rpm
checksum_type: sha256
description:
  MojoX::Log::Log4perl::Tiny allows you to replace default Mojolicious
  logging Mojo::Log with your existing Log::Log4perl::Logger instance.


pkgId: 3189e1a5373aef8dde291ba2da55c89174ec31aea63731b431f4a5a04973ea9f
name: perl-MojoX-MIME-Types
arch: noarch
version: 2.30
epoch: 0
release: 2.fc44
summary: MIME Types for Mojolicious
url: https://metacpan.org/release/MIME-Types
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MIME-Types-2.30-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MojoX-MIME-Types-2.30-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a drop-in replacement for Mojolicious::Types, but with a more
  correct handling plus a complete list of types... a huge list of types.

  Some methods ignore information they receive: those parameters are accepted
  for compatibility with the Mojolicious::Types interface, but should not
  contain useful information.


pkgId: 4947422599c36975e0f3b6f39c16952b2132f0dfc4309b7c5301ff26d4f054fc
name: perl-Mojolicious
arch: noarch
version: 9.42
epoch: 0
release: 2.fc44
summary: A next generation web framework for Perl
url: https://metacpan.org/release/Mojolicious
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojolicious-9.42-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojolicious-9.42-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Back in the early days of the web there was this wonderful Perl library
  called CGI, many people only learned Perl because of it. It was simple
  enough to get started without knowing much about the language and powerful
  enough to keep you going, learning by doing was much fun. While most of the
  techniques used are outdated now, the idea behind it is not. Mojolicious is
  a new attempt at implementing this idea using state of the art technology.


pkgId: 15b3c70bc55fac0245520af6244286ace55d91727f236f0dabe2518076bc1518
name: perl-Mojolicious-Plugin-AssetPack
arch: noarch
version: 2.15
epoch: 0
release: 4.fc44
summary: Compress and convert CSS, Less, Sass, JavaScript and CoffeeScript files
url: https://metacpan.org/release/Mojolicious-Plugin-AssetPack
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojolicious-Plugin-AssetPack-2.15-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojolicious-Plugin-AssetPack-2.15-4.fc44.noarch.rpm
checksum_type: sha256
description:
  Mojolicious::Plugin::AssetPack is a Mojolicious plugin which can be used to
  cram multiple assets of the same type into one file. This means that if you
  have a lot of CSS files (.css, .less, .sass, ...) as input, the AssetPack
  can make one big CSS file as output. This is good, since it will often
  speed up the rendering of your page. The output file can even be minified,
  meaning you can save bandwidth and browser parsing time.


pkgId: 002feba2b9bb2819e93e81801eb8e177c75fa890aa8172769e040eb336cb3264
name: perl-Mojolicious-Plugin-I18N
arch: noarch
version: 1.6
epoch: 0
release: 25.fc44
summary: Internationalization Plugin for Mojolicious
url: https://metacpan.org/release/Mojolicious-Plugin-I18N
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojolicious-Plugin-I18N-1.6-25.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojolicious-Plugin-I18N-1.6-25.fc44.noarch.rpm
checksum_type: sha256
description:
  Mojolicious::Plugin::I18N is internationalization plugin for Mojolicious. It
  works with Mojolicious 4.0+.


pkgId: 0be7bfa7e5922a0fa576c77cd4d502a73982b264850dd8891a8293cf9d2d1b75
name: perl-Mojolicious-Plugin-OAuth2
arch: noarch
version: 2.02
epoch: 0
release: 11.fc44
summary: A Mojolicious plugin that allows OAuth2 authentication
url: https://metacpan.org/release/Mojolicious-Plugin-OAuth2
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojolicious-Plugin-OAuth2-2.02-11.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojolicious-Plugin-OAuth2-2.02-11.fc44.noarch.rpm
checksum_type: sha256
description:
  This Mojolicious plugin allows you to easily authenticate against a OAuth2
  provider. It includes configurations for a few popular providers, but you can
  add your own easily as well.


pkgId: 2577c59cf228a4206073a6e2eb103303e3b3edcded93bd6165b2847c19190ba3
name: perl-Mojolicious-Plugin-OpenAPI
arch: noarch
version: 5.11
epoch: 0
release: 3.fc44
summary: OpenAPI / Swagger plugin for Mojolicious
url: https://metacpan.org/release/Mojolicious-Plugin-OpenAPI
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojolicious-Plugin-OpenAPI-5.11-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojolicious-Plugin-OpenAPI-5.11-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Mojolicious::Plugin::OpenAPI is a Mojolicious::Plugin that add routes and
  input/output validation to your Mojolicious application based on a OpenAPI
  (Swagger) specification. This plugin supports both version 2.0 and 3.x,
  though 3.x might have some missing features.


pkgId: 0a48db4d7face221f783dfd8c661efbefe6a954aed610457e0fbdb54a7ac0046
name: perl-Mojolicious-Plugin-RenderFile
arch: noarch
version: 0.12
epoch: 0
release: 25.fc44
summary: Mojolicious plugin allowing customization to force file download
url: https://metacpan.org/release/Mojolicious-Plugin-RenderFile
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mojolicious-Plugin-RenderFile-0.12-25.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mojolicious-Plugin-RenderFile-0.12-25.fc44.noarch.rpm
checksum_type: sha256
description:
  Mojolicious::Plugin::RenderFile is a Mojolicious plugin that makes it
  easy to provide files for download. It also allows customization of
  the HTTP headers sent to the client.


pkgId: c07111c23779945ee30e0ba5c349a3dfd12e957f802502084375e1966fb4d52c
name: perl-Mon
arch: noarch
version: 0.11
epoch: 0
release: 48.fc44
summary: Mon Perl module
url: https://metacpan.org/release/Mon
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mon-0.11-48.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mon-0.11-48.fc44.noarch.rpm
checksum_type: sha256
description:
  This is the Perl5 module for interfacing with the Mon system monitoring
  package. Currently only the client interface is implemented, but more
  things like special logging routines and persistent monitors are being
  considered.


pkgId: 94c6490b5caab158a82a1a6badeb877d5c952e28d38858b25a6a34ff4e1b8c7e
name: perl-MongoDB
arch: noarch
version: 2.2.2
epoch: 0
release: 16.fc44
summary: MongoDB driver for Perl
url: https://metacpan.org/release/MongoDB
rpm_license: Apache-2.0 AND (GPL-1.0-or-later OR Artistic-1.0-Perl)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MongoDB-2.2.2-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MongoDB-2.2.2-16.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a Perl client for accessing MongoDB servers.

  Upstream claims it will drop support for this code on 2020-08-13.


pkgId: a7acc6f3d573fbda78c6b0748052ac441e7db39f5c1d00aed5f5935c835b421a
name: perl-Monitoring-Plugin
arch: noarch
version: 0.40
epoch: 0
release: 21.fc44
summary: Family of modules to streamline writing plugins for various monitoring systems
url: https://metacpan.org/release/Monitoring-Plugin
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Monitoring-Plugin-0.40-21.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Monitoring-Plugin-0.40-21.fc44.noarch.rpm
checksum_type: sha256
description:
  Monitoring::Plugin and its associated Monitoring::Plugin::* modules are a
  family of perl modules to streamline writing Monitoring plugins. The main
  end user modules are Monitoring::Plugin, providing an object-oriented
  interface to the entire Monitoring::Plugin::* collection, and
  Monitoring::Plugin::Functions, providing a simpler functional interface to
  a useful subset of the available functionality.


pkgId: 8be5022d4b90ec5d6a05abe9fc1e87cba1e56945a4f27d893f3dd3b40a7f563b
name: perl-Monotone-AutomateStdio
arch: noarch
version: 1.10
epoch: 0
release: 30.fc44
summary: Perl interface to Monotone via automate stdio
url: https://metacpan.org/release/Monotone-AutomateStdio
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Monotone-AutomateStdio-1.10-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Monotone-AutomateStdio-1.10-30.fc44.noarch.rpm
checksum_type: sha256
description:
  The Monotone::AutomateStdio class gives a Perl developer access to
  Monotone's automate stdio facility via an easy to use interface. All
  command, option and output formats are handled internally by this
  class. Any structured information returned by Monotone is parsed and
  returned back to the caller as lists of records for ease of access
  (detailed below). One also has the option of accessing Monotone's
  output as one large string should you prefer.


pkgId: 24b629cf814c700ae456dbfa0b980227188ed3e530b77cf663ed993042cb29f3
name: perl-Moo
arch: noarch
version: 2.005005
epoch: 0
release: 11.fc44
summary: Minimalist Object Orientation (with Moose compatibility)
url: https://metacpan.org/release/Moo
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-19.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Moo-2.005005-11.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Moo-2.005005-11.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is an extremely light-weight, high-performance Moose
  replacement. It also avoids depending on any XS modules to allow simple
  deployments. The name Moo is based on the idea that it provides almost -but
  not quite- two thirds of Moose.


pkgId: c13fa930f4f4e9cdcd37cf646e10756a6e9a3f2e06b55e60dc2780dae3f0a374
name: perl-MooX-Cmd
arch: noarch
version: 0.017
epoch: 0
release: 30.fc44
summary: Giving an easy Moo style way to make command organized CLI apps
url: https://metacpan.org/release/MooX-Cmd
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-Cmd-0.017-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-Cmd-0.017-30.fc44.noarch.rpm
checksum_type: sha256
description:
  Works together with MooX::Options for every command on its own, so options
  are parsed for the specific context and used for the instantiation:


pkgId: 1633127fd5e5ac81f3a39643677093e043a8abf4ec57f58a65c69c9fbc68041f
name: perl-MooX-ConfigFromFile
arch: noarch
version: 0.009
epoch: 0
release: 29.fc44
summary: Moo eXtension for initializing objects from configuration file
url: https://metacpan.org/release/MooX-ConfigFromFile
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-ConfigFromFile-0.009-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-ConfigFromFile-0.009-29.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is intended to easy load initialization values for attributes
  on object construction from an appropriate configuration file. The building is
  done in MooX::ConfigFromFile::Rule - using MooX::ConfigFromFile ensures the
  role is applied.


pkgId: f324932c558bd256ed90392953d8139e1539afcbe9627a6f1378a30f9dc6ff03
name: perl-MooX-File-ConfigDir
arch: noarch
version: 0.008
epoch: 0
release: 16.fc44
summary: Moo eXtension for File::ConfigDir
url: https://metacpan.org/release/MooX-File-ConfigDir
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-File-ConfigDir-0.008-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-File-ConfigDir-0.008-16.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is a helper for easily find configuration file locations.
  Whether to use this information for find a suitable place for installing
  them or looking around for finding any piece of settings, heavily depends
  on the requirements.


pkgId: f1e93b047914ee4ae1185e1a5accf33e0202fa596dfac74b069acc82c15dc8dd
name: perl-MooX-HandlesVia
arch: noarch
version: 0.001009
epoch: 0
release: 16.fc44
summary: NativeTrait-like behavior for Moo
url: https://metacpan.org/release/MooX-HandlesVia
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-HandlesVia-0.001009-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-HandlesVia-0.001009-16.fc44.noarch.rpm
checksum_type: sha256
description:
  MooX::HandlesVia is an extension of Moo's 'handles' attribute
  functionality. It provides a means of proxying functionality from an
  external class to the given atttribute. This is most commonly used as a way
  to emulate 'Native Trait' behavior that has become commonplace in Moose
  code, for which there was no Moo alternative.


pkgId: e4c04f6757c3b808fd346aee865d31d39d10fd6a75183c9708ed33ce14749b2e
name: perl-MooX-Locale-Passthrough
arch: noarch
version: 0.001
epoch: 0
release: 25.fc44
summary: Provide API used in translator modules without translating
url: https://metacpan.org/release/MooX-Locale-Passthrough
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-Locale-Passthrough-0.001-25.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-Locale-Passthrough-0.001-25.fc44.noarch.rpm
checksum_type: sha256
description:
  MooX::Locale::Passthrough is made to allow CPAN modules use translator API
  without adding heavy dependencies (external software) or requirements
  (operating resulting solution).


pkgId: edc913aade2f25d381a1387db1fcebebc9aa139593211cee00e139a54dbc9a5c
name: perl-MooX-Log-Any
arch: noarch
version: 0.004004
epoch: 0
release: 30.fc44
summary: A Moose role to add support for logging via Log::Any
url: https://metacpan.org/release/MooX-Log-Any
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-Log-Any-0.004004-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-Log-Any-0.004004-30.fc44.noarch.rpm
checksum_type: sha256
description:
  A logging role building a very lightweight wrapper to Log::Any for use with
  your Moo or Moose classes. Connecting a Log::Any::Adapter should be
  performed prior to logging the first log message, otherwise nothing will
  happen, just like with Log::Any


pkgId: 9a984c7e4c50104764b9e0d6c213e76b955346f47d4b8d922a0f8d1e3bf95e5c
name: perl-MooX-Role-Logger
arch: noarch
version: 0.005
epoch: 0
release: 19.fc44
summary: Universal logging via Log::Any
url: https://metacpan.org/release/MooX-Role-Logger
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-Role-Logger-0.005-19.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-Role-Logger-0.005-19.fc44.noarch.rpm
checksum_type: sha256
description:
  This role provides universal logging via Log::Any. The class using this role
  doesn't need to know or care about the details of log configuration,
  implementation or destination.


pkgId: 63c3433599b891bdce98406470e2f2e1b04cc006a56a032e10fc56ae70ff1d3e
name: perl-MooX-Role-Parameterized-tests
arch: noarch
version: 0.500
epoch: 0
release: 4.fc44
summary: Tests for perl-MooX-Role-Parameterized
url: https://metacpan.org/release/MooX-Role-Parameterized
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-Role-Parameterized-0.500-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-Role-Parameterized-tests-0.500-4.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-MooX-Role-Parameterized. Execute them
  with "/usr/libexec/perl-MooX-Role-Parameterized/test".


pkgId: 45aea4e7554e20f5fd16fe027122cc5b8864e031cfcbc8fd0a27280c285849ee
name: perl-MooX-StrictConstructor
arch: noarch
version: 0.013
epoch: 0
release: 4.fc44
summary: Make your Moo-based object constructors blow up on unknown attributes
url: https://metacpan.org/release/MooX-StrictConstructor
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-StrictConstructor-0.013-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-StrictConstructor-0.013-4.fc44.noarch.rpm
checksum_type: sha256
description:
  Simply loading this module makes your constructors "strict". If your
  constructor is called with an attribute init argument that your class does
  not declare, then it dies. This is a great way to catch small typos.


pkgId: b115191d18acd263d892f2252e2f96cf7716dea6fa241a4d2382ec252df3d9f3
name: perl-MooX-StrictConstructor-tests
arch: noarch
version: 0.013
epoch: 0
release: 4.fc44
summary: Tests for perl-MooX-StrictConstructor
url: https://metacpan.org/release/MooX-StrictConstructor
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-StrictConstructor-0.013-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-StrictConstructor-tests-0.013-4.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-MooX-StrictConstructor. Execute them
  with "/usr/libexec/perl-MooX-StrictConstructor/test".


pkgId: 8a1ecc9f966867c09dee042074c933faebd08a3d92d1d099b702f761647feef1
name: perl-MooX-TypeTiny
arch: noarch
version: 0.002003
epoch: 0
release: 14.fc44
summary: Optimized type checks for Moo + Type::Tiny
url: https://metacpan.org/dist/MooX-TypeTiny
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-06.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-TypeTiny-0.002003-14.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-TypeTiny-0.002003-14.fc44.noarch.rpm
checksum_type: sha256
description:
  This module optimizes Moo type checks when used with Type::Tiny to perform
  better. It will automatically apply to isa checks and coercions that use
  Type::Tiny. Non-Type::Tiny isa checks will work as normal.


pkgId: a4114fce00f3202c7f15e842443a8b0681d28de15c908b0e2c2d9fce79175ef5
name: perl-MooX-Types-MooseLike
arch: noarch
version: 0.29
epoch: 0
release: 31.fc44
summary: Some Moosish types and a type builder
url: https://metacpan.org/release/MooX-Types-MooseLike
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-Types-MooseLike-0.29-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-Types-MooseLike-0.29-31.fc44.noarch.rpm
checksum_type: sha256
description:
  See MooX::Types::MooseLike::Base for a list of available base types. Its source
  also provides an example of how to build base types, along with both
  parameterizable and non-parameterizable.


pkgId: 00fa30eaa10ac3fef2cfa7aac9cabbc5cb274f96ff8fb7bf6ac152d09514505f
name: perl-MooX-late
arch: noarch
version: 0.100
epoch: 0
release: 12.fc44
summary: Easily translate Moose code to Moo
url: https://metacpan.org/release/MooX-late
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooX-late-0.100-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooX-late-0.100-12.fc44.noarch.rpm
checksum_type: sha256
description:
  Moo is a light-weight object oriented programming framework which aims to
  be compatible with Moose. It does this by detecting when Moose has been
  loaded, and automatically "inflating" its classes and roles to full Moose
  classes and roles. This way, Moo classes can consume Moose roles, Moose
  classes can extend Moo classes, and so forth.


pkgId: 5efaa20533a659d72c82676195029212bea5758fe7105042313fc236e9daab15
name: perl-Moose
arch: x86_64
version: 2.4000
epoch: 0
release: 5.fc44
summary: Complete modern object system for Perl 5
url: https://metacpan.org/release/Moose
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Moose-2.4000-5.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Moose-2.4000-5.fc44.x86_64.rpm
checksum_type: sha256
description:
  Moose is an extension of the Perl 5 object system.

  The main goal of Moose is to make Perl 5 Object Oriented programming easier,
  more consistent and less tedious. With Moose you can to think more about what
  you want to do and less about the mechanics of OOP.

  Additionally, Moose is built on top of Class::MOP, which is a metaclass system
  for Perl 5. This means that Moose not only makes building normal Perl 5
  objects better, but it provides the power of metaclass programming as well.
  Moose is different from other Perl 5 object systems because it is not a new
  system, but instead an extension of the existing one.


pkgId: c79f0903c9c4494675ea91cdb72f135830e9ce2cf66e2e4da634d3106d2e5774
name: perl-MooseX-Aliases
arch: noarch
version: 0.11
epoch: 0
release: 34.fc44
summary: Easy aliasing of methods and attributes in Moose
url: https://metacpan.org/release/MooseX-Aliases
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Aliases-0.11-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Aliases-0.11-34.fc44.noarch.rpm
checksum_type: sha256
description:
  The MooseX::Aliases module will allow you to quickly alias methods in
  Moose. It provides an alias parameter for has() to generate aliased
  accessors as well as the standard ones. Attributes can also be initialized
  in the constructor via their aliased names.


pkgId: a15aa1734eb4de3bbd7dc9c782704b647ac3c9be454fe9637745cacd42c50f81
name: perl-MooseX-App
arch: noarch
version: 1.43
epoch: 0
release: 7.fc44
summary: Write user-friendly command line apps with even less suffering
url: https://metacpan.org/release/MooseX-App
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-App-1.43-7.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-App-1.43-7.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX-App is a highly customisable helper to write user-friendly command
  line applications without having to worry about most of the annoying things
  usually involved. Just take any existing Moose class, add a single line
  (use MooseX-App qw(PluginA PluginB ...);) and create one class for each
  command in an underlying namespace. Options and positional parameters can
  be defined as simple Moose accessors.


pkgId: a9a6dc19f258f15dcc4699cf16328138f95b9bd882ac78f80756ef6ad8ea228a
name: perl-MooseX-App-Cmd
arch: noarch
version: 0.34
epoch: 0
release: 15.fc44
summary: Mashes up MooseX::Getopt and App::Cmd
url: https://metacpan.org/release/MooseX-App-Cmd
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-App-Cmd-0.34-15.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-App-Cmd-0.34-15.fc44.noarch.rpm
checksum_type: sha256
description:
  This package marries App::Cmd with MooseX::Getopt.

  Use it like the App::Cmd man-page advises (especially see the
  App::Cmd::Tutorial man-page), swapping App::Cmd::Command for
  MooseX::App::Cmd::Command.

  Then you can write your commands as Moose classes, with the
  MooseX::Getopt defining the options for you instead of 'opt_spec'
  returning a Getopt::Long::Descriptive spec.


pkgId: 24592c2454d2dc86026a42f2fd4ccd926cb093375a15cffd7601971f09d176f9
name: perl-MooseX-ArrayRef
arch: noarch
version: 0.005
epoch: 0
release: 30.fc44
summary: Blessed array references with Moose
url: https://metacpan.org/release/MooseX-ArrayRef
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-ArrayRef-0.005-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-ArrayRef-0.005-30.fc44.noarch.rpm
checksum_type: sha256
description:
  Objects implemented with array references are often faster than those
  implemented with hash references. Moose's default object implementation is
  hash reference based. This is object implementation based on array references.

rpm_license:
  (GPL-1.0-or-later OR Artistic-1.0-Perl) AND (GPL-1.0-or-later OR Artistic-1.0-Perl OR LicenseRef-Callaway-CC-BY-SA)


pkgId: c0139a70608c99fb0989e3c4eb0d6442d58c2dd71cc84692bffb9a46f1820f81
name: perl-MooseX-Attribute-Chained
arch: noarch
version: 1.0.3
epoch: 0
release: 29.fc44
summary: Attribute that returns the instance to allow for chaining
url: https://metacpan.org/release/MooseX-Attribute-Chained
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Attribute-Chained-1.0.3-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Attribute-Chained-1.0.3-29.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::Attribute::Chained is a Moose Trait which allows for method
  chaining on accessors by returning $self on write/set operations.


pkgId: 7993a305c532dbe0953b977efa526c0adeffe55a8d363ca38491d7360c0e280f
name: perl-MooseX-AttributeHelpers
arch: noarch
version: 0.25
epoch: 0
release: 30.fc44
summary: Extended Moose attribute interfaces (deprecated)
url: https://metacpan.org/release/MooseX-AttributeHelpers
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-AttributeHelpers-0.25-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-AttributeHelpers-0.25-30.fc44.noarch.rpm
checksum_type: sha256
description:
  This distribution is deprecated. The features it provides have been added to
  the Moose core code as Moose::Meta::Attribute::Native. This distribution should
  not be used by any new code.

  While Moose attributes provide you with a way to name your accessors,
  readers, writers, clearers and predicates, this library provides commonly
  used attribute helper methods for more specific types of data.


pkgId: b2ee18011c919fea47c4cd3045953a91e6f9e45d9138f6efda2d8e0496966bb7
name: perl-MooseX-AttributeShortcuts
arch: noarch
version: 0.037
epoch: 0
release: 25.fc44
summary: Shorthand for common Moose attribute options
url: http://metacpan.org/release/MooseX-AttributeShortcuts/
rpm_license: LicenseRef-Callaway-LGPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-01.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-AttributeShortcuts-0.037-25.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-AttributeShortcuts-0.037-25.fc44.noarch.rpm
checksum_type: sha256
description:
  Ever find yourself repeatedly specifying writers and builders, because there's
  no good shortcut to specify them? Sometimes you want an attribute to have
  a read-only public interface, but a private writer. And wouldn't it be easier
  to just say "builder => 1" and have the attribute construct the canonical
  "_build_$name" builder name for you?

  This package causes an attribute trait to be applied to all attributes defined
  to the using class. This trait extends the attribute option processing to
  handle the above variations.


pkgId: 23680ec0a980d0d115520dc8e33e6569020bb336ccbfefe23f854e3726729bc5
name: perl-MooseX-CascadeClearing
arch: noarch
version: 0.05
epoch: 0
release: 36.fc44
summary: Cascade clearer actions across attributes
url: https://metacpan.org/release/MooseX-CascadeClearing
rpm_license: LGPL-2.1-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-35.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-CascadeClearing-0.05-36.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-CascadeClearing-0.05-36.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::CascadeClearing does the necessary meta class fiddling to allow an
  clearing one attribute to be cascaded through to other attributes as well,
  calling their clear accessors.


pkgId: 6b7a54459300b935544c98cdcb7e00f879c96689336458a6b28dd0e6d9ae51bd
name: perl-MooseX-ClassAttribute
arch: noarch
version: 0.29
epoch: 0
release: 28.fc44
summary: Declare class attributes Moose-style
url: https://metacpan.org/release/MooseX-ClassAttribute
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-ClassAttribute-0.29-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-ClassAttribute-0.29-28.fc44.noarch.rpm
checksum_type: sha256
description:
  This module allows you to declare class attributes in exactly the same way as
  object attributes, using class_has() instead of has().

  You can use any feature of Moose's attribute declarations, including overriding
  a parent's attributes, delegation (handles), and attribute metaclasses, and it
  should just work. The one exception is the "required" flag, which is not
  allowed for class attributes.

  The accessor methods for class attribute may be called on the class directly,
  or on objects of that class. Passing a class attribute to the constructor will
  not set it.


pkgId: 08209aa7aa42c5f73c766d2a142574aa39279e48d2d0b12e26e4393db7fd5907
name: perl-MooseX-Clone
arch: noarch
version: 0.06
epoch: 0
release: 34.fc44
summary: Fine grained cloning support for Moose objects
url: https://metacpan.org/release/MooseX-Clone
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Clone-0.06-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Clone-0.06-34.fc44.noarch.rpm
checksum_type: sha256
description:
  Out of the box Moose only provides very bare-bones cloning support in order
  to maximize flexibility.

  This role provides a clone method that makes use of the low level cloning
  support already in Moose and adds selective deep cloning based on
  introspection on top of that. Attributes with the Clone trait will handle
  cloning of data within the object, typically delegating to the attribute
  value's own clone method.


pkgId: d11f0f3843ef8a9b65e8eecbbfd11ed41d9aeff0755426ddab6959916c675950
name: perl-MooseX-ConfigFromFile
arch: noarch
version: 0.14
epoch: 0
release: 34.fc44
summary: An abstract Moose role for setting attributes from a configfile
url: https://metacpan.org/release/MooseX-ConfigFromFile
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-ConfigFromFile-0.14-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-ConfigFromFile-0.14-34.fc44.noarch.rpm
checksum_type: sha256
description:
  This is an abstract role which provides an alternate constructor for
  creating objects using parameters passed in from a configuration file. The
  actual implementation of reading the configuration file is left to concrete
  subroles.

  It declares an attribute 'configfile' and a class method 'new_with_config',
  and requires that concrete roles derived from it implement the class method
  'get_config_from_file'.

  Attributes specified directly as arguments to 'new_with_config' supersede
  those in the configfile.


pkgId: 7f70c82135a163b18cdde622e1f06c3773eb6d55e8e48d9741e310663cb312de
name: perl-MooseX-Configuration
arch: noarch
version: 0.02
epoch: 0
release: 29.fc44
summary: Define attributes which come from configuration files
url: https://metacpan.org/release/MooseX-Configuration
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Configuration-0.02-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Configuration-0.02-29.fc44.noarch.rpm
checksum_type: sha256
description:
  This module lets you define attributes which can come from a configuration
  file. It also adds a role to your class which allows you to write a
  configuration file.


pkgId: 1e9e99b3091a10d7984590dfdceb9b36476968fbd1ffdaad6b9c42df2b87c7d0
name: perl-MooseX-Daemonize
arch: noarch
version: 0.22
epoch: 0
release: 19.fc44
summary: Role for daemonizing your Moose based application
url: https://metacpan.org/release/MooseX-Daemonize
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Daemonize-0.22-19.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Daemonize-0.22-19.fc44.noarch.rpm
checksum_type: sha256
description:
  Often you want to write a persistent daemon that has a pid file, and
  responds appropriately to Signals. This module provides a set of basic
  roles as an infrastructure to do that.


pkgId: 40828f9b58939b1b573a0378334e903363be7be1543f566d57151e725af85b56
name: perl-MooseX-Declare
arch: noarch
version: 0.43
epoch: 0
release: 31.fc44
summary: Declarative syntax for Moose
url: https://metacpan.org/release/MooseX-Declare
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Declare-0.43-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Declare-0.43-31.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides syntactic sugar for Moose, the postmodern object
  system for Perl 5. When used, it sets up the class and role keywords.


pkgId: 700ec4f9786a1bb1292baea6d88e3bd4b768c5f1cf085952285667dd20d56f88
name: perl-MooseX-Deprecated
arch: noarch
version: 0.005
epoch: 0
release: 20.fc44
summary: Mark attributes and methods as deprecated
url: https://metacpan.org/release/MooseX-Deprecated
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Deprecated-0.005-20.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Deprecated-0.005-20.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::Deprecated is a parameterizable role that makes it easy to
  deprecate particular attributes and methods in a class.


pkgId: 24c8e5690e037a16fa9e062e3712ea74fe3313b2b21ab926be24dd7b2f9a7989
name: perl-MooseX-Emulate-Class-Accessor-Fast
arch: noarch
version: 0.009032
epoch: 0
release: 22.fc44
summary: Emulate Class::Accessor::Fast behavior using Moose attributes
url: https://metacpan.org/release/MooseX-Emulate-Class-Accessor-Fast
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Emulate-Class-Accessor-Fast-0.009032-22.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Emulate-Class-Accessor-Fast-0.009032-22.fc44.noarch.rpm
checksum_type: sha256
description:
  This module attempts to emulate the behavior of Class::Accessor::Fast
  as accurately as possible using the Moose attribute system. The public
  API of "Class::Accessor::Fast" is wholly supported, but the private
  methods are not.  If you are only using the public methods (as you
  should) migration should be a matter of switching your "use base" line
  to a "with" line.


pkgId: 07078755dd1f09f49d4b30cff1ba7a308464365889cfc99cdf65c7499f4ad647
name: perl-MooseX-Extended
arch: noarch
version: 0.35
epoch: 0
release: 7.fc44
summary: Extend Moose with safe defaults and useful features
url: https://metacpan.org/dist/MooseX-Extended/
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Extended-0.35-7.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Extended-0.35-7.fc44.noarch.rpm
checksum_type: sha256
description:
  This class attempts to create a safer version of Moose that defaults to
  read-only attributes and is easier to read and write.


pkgId: 46269bfdd76703f381f96e671e19cdd49a88cd43fb1b1c49dfdaab2e7261eab8
name: perl-MooseX-Getopt
arch: noarch
version: 0.78
epoch: 0
release: 4.fc44
summary: Moose role for processing command line options
url: https://metacpan.org/release/MooseX-Getopt
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-47.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Getopt-0.78-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Getopt-0.78-4.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a Moose role which provides an alternate constructor for creating
  objects using parameters passed in from the command line.


pkgId: 2be4a4ef0eb40cbb5af0234748ab1dcc60239823d09ea473a530a2eba670978a
name: perl-MooseX-GlobRef
arch: noarch
version: 0.0701
epoch: 0
release: 42.fc44
summary: Store a Moose object in glob reference
url: https://metacpan.org/release/MooseX-GlobRef
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-GlobRef-0.0701-42.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-GlobRef-0.0701-42.fc44.noarch.rpm
checksum_type: sha256
description:
  This meta-policy allows to store Moose object in glob reference or file
  handle. The class attributes will be stored in anonymous hash associated
  with glob reference. It allows to create a Moose version of IO::Handle.


pkgId: a049ce884ecbb9841f5a9b14ebafb363fa11660a0b782b4fa6fe071c53d1fd3e
name: perl-MooseX-Has-Options
arch: noarch
version: 0.003
epoch: 0
release: 36.fc44
summary: Succinct options for Moose
url: https://metacpan.org/release/MooseX-Has-Options
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Has-Options-0.003-36.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Has-Options-0.003-36.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a succinct syntax for declaring options for Moose
  attributes. It hijacks the 'has' function imported by Moose and replaces it
  with one that understands the options syntax.


pkgId: 50b148a1a74450b6ab555a93771f4060d327653263f25ef3acd239b79ebbcf1e
name: perl-MooseX-Has-Sugar
arch: noarch
version: 1.000006
epoch: 0
release: 27.fc44
summary: Sugar syntax for moose 'has' fields
url: https://metacpan.org/release/MooseX-Has-Sugar
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Has-Sugar-1.000006-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Has-Sugar-1.000006-27.fc44.noarch.rpm
checksum_type: sha256
description:
  Moose "has" syntax is generally fine, but sometimes one gets bothered with
  the constant typing of string quotes for things. The MooseX::Types module
  exists and in many ways reduces the need for constant string creation.


pkgId: b3c08091e42498ab23a9a9c5ed426f573221f46c99dd0bd37b7fc518024efbd6
name: perl-MooseX-InsideOut
arch: noarch
version: 0.106
epoch: 0
release: 42.fc44
summary: Inside-out objects with Moose
url: https://metacpan.org/release/MooseX-InsideOut
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-InsideOut-0.106-42.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-InsideOut-0.106-42.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::InsideOut provides meta-roles for inside-out objects. That is, it
  sets up attribute slot storage somewhere other than inside $self. This
  means that you can extend non-Moose classes, whose internals you either
  don't want to care about or aren't hash-based.


pkgId: 12669b8b06fc52f9c618f6f84f9c99fb242ea8e7803284b05a74f09b6ab7d3a6
name: perl-MooseX-Iterator
arch: noarch
version: 0.11
epoch: 0
release: 48.fc44
summary: Iterate over collections
url: https://metacpan.org/dist/MooseX-Iterator
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Iterator-0.11-48.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Iterator-0.11-48.fc44.noarch.rpm
checksum_type: sha256
description:
  This is an attempt to add Smalltalk-like streams to Moose. It currently
  works with ArrayRefs and HashRefs.


pkgId: b35ab7e7cfc381b22eb9f092bc812d2a6afc2c90c1cc390e9664861d80e863a2
name: perl-MooseX-Log-Log4perl
arch: noarch
version: 0.47
epoch: 0
release: 32.fc44
summary: A Logging Role for Moose based on Log::Log4perl
url: https://metacpan.org/release/MooseX-Log-Log4perl
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Log-Log4perl-0.47-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Log-Log4perl-0.47-32.fc44.noarch.rpm
checksum_type: sha256
description:
  A logging role building a very lightweight wrapper to Log::Log4perl for use
  with your the Moose classes. The initialization of the Log4perl instance must
  be performed prior to logging the first log message. Otherwise the default
  initialization will happen, probably not doing the things you expect.

  For compatibility the 'logger' attribute can be accessed to use a common
  interface for application logging.

  For simple logging needs use MooseX::Log::Log4perl::Easy to directly add
  log_<level> methods to your class instance.


pkgId: b3300130bcfd5ecdaab37c9d6db23184988e93c2ad909f32db1923c8922d2071
name: perl-MooseX-MarkAsMethods
arch: noarch
version: 0.15
epoch: 0
release: 38.fc44
summary: Mark overload code symbols as methods
url: http://metacpan.org/release/MooseX-MarkAsMethods/
rpm_license: LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-MarkAsMethods-0.15-38.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-MarkAsMethods-0.15-38.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::MarkAsMethods allows one to easily mark certain functions as Moose
  methods. This will allow other packages such as namespace::autoclean to
  operate without blowing away your overloads. After using
  MooseX::MarkAsMethods your overloads will be recognized by Class::MOP as
  being methods, and class extension as well as composition from roles with
  overloads will "just work".


pkgId: cc0870828550651b40a4bc94f6eb7e093e242b0521e2d08a5eb918ecd400a0e7
name: perl-MooseX-Meta-TypeConstraint-ForceCoercion
arch: noarch
version: 0.01
epoch: 0
release: 44.fc44
summary: Force coercion when validating type constraints
url: https://metacpan.org/release/MooseX-Meta-TypeConstraint-ForceCoercion
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Meta-TypeConstraint-ForceCoercion-0.01-44.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Meta-TypeConstraint-ForceCoercion-0.01-44.fc44.noarch.rpm
checksum_type: sha256
description:
  This class allows to wrap any Moose::Meta::TypeConstraint in a way that
  will force coercion of the value when checking or validating a value
  against it.


pkgId: 1abb2ab9fa19a4a65a4896117c967315dcdf1b1d952623c2258e174b1a8f2918
name: perl-MooseX-Meta-TypeConstraint-Mooish
arch: noarch
version: 0.001
epoch: 0
release: 33.fc44
summary: Translate Moo-style constraints to Moose-style
url: https://metacpan.org/release/MooseX-Meta-TypeConstraint-Mooish
rpm_license: LicenseRef-Callaway-LGPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Meta-TypeConstraint-Mooish-0.001-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Meta-TypeConstraint-Mooish-0.001-33.fc44.noarch.rpm
checksum_type: sha256
description:
  Moose type constraints are expected to return true if the value passes the
  constraint, and false otherwise; Moo constraints, on the other hand, die
  if validation fails. This meta-class allows for Moo-style constraints. It will
  wrap them and translate their Moo into a dialect Moose understands.


pkgId: de71c60546f098000a2db1cecb528d1f8797eb7c7355fda53313c19c396b6beb
name: perl-MooseX-Method-Signatures
arch: noarch
version: 0.49
epoch: 0
release: 30.fc44
summary: Method declarations with type constraints and no source filter
url: https://metacpan.org/release/MooseX-Method-Signatures
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Method-Signatures-0.49-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Method-Signatures-0.49-30.fc44.noarch.rpm
checksum_type: sha256
description:
  Provides a proper method keyword, like "sub" but specifically for making
  methods and validating their arguments against Moose type constraints.


pkgId: ab445a3bac20a7a4cd509babf8f5c9390ca41a3cca3b16cb2ad2885c5155e2f1
name: perl-MooseX-MultiInitArg
arch: noarch
version: 0.02
epoch: 0
release: 34.fc44
summary: Attributes with aliases for constructor arguments
url: https://metacpan.org/release/MooseX-MultiInitArg
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-MultiInitArg-0.02-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-MultiInitArg-0.02-34.fc44.noarch.rpm
checksum_type: sha256
description:
  If you've ever wanted to be able to call an attribute any number of
  things while you're passing arguments to your object constructor, Now
  You Can. This is an attribute metaclass / trait to allow easy new()-time
  attribute aliasing.


pkgId: 48a8840dd03faf0da574a8fc7d466a48693237eb110335897a213b95f703084e
name: perl-MooseX-MultiMethods
arch: noarch
version: 0.10
epoch: 0
release: 46.fc44
summary: Multi Method Dispatch based on Moose type constraints
url: https://metacpan.org/release/MooseX-MultiMethods
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-MultiMethods-0.10-46.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-MultiMethods-0.10-46.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides multi method dispatch based on Moose type constraints.
  It does so by providing a multi keyword that extends the method keyword
  provided by MooseX::Method::Signatures.


pkgId: 2fe2c597a9ad26cae11c1a6d218d495b0fe70ba8bb48787d62323415918ef7ce
name: perl-MooseX-NonMoose
arch: noarch
version: 0.27
epoch: 0
release: 4.fc44
summary: Easy subclassing of non-Moose classes
url: https://metacpan.org/release/MooseX-NonMoose
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-NonMoose-0.27-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-NonMoose-0.27-4.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::NonMoose allows for easily subclassing non-Moose classes with
  Moose, taking care of the annoying details connected with doing this, such
  as setting up proper inheritance from Moose::Object and installing (and
  inlining, at make_immutable time) a constructor that makes sure things like
  BUILD methods are called. It tries to be as non-intrusive as possible -
  when this module is used, inheriting from non-Moose classes and inheriting
  from Moose classes should work identically, aside from the few caveats
  mentioned below. One of the goals of this module is that including it in a
  Moose::Exporter-based package used across an entire application should be
  possible, without interfering with classes that only inherit from Moose
  modules, or even classes that don't inherit from anything at all.


pkgId: a7b9e348fc8c9a9b07c191a1a5163d355d8e7a964c50031eec3780a9909ddec0
name: perl-MooseX-Object-Pluggable
arch: noarch
version: 0.0014
epoch: 0
release: 33.fc44
summary: Make your Moose classes pluggable
url: https://metacpan.org/release/MooseX-Object-Pluggable
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Object-Pluggable-0.0014-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Object-Pluggable-0.0014-33.fc44.noarch.rpm
checksum_type: sha256
description:
  This module aids in the development and deployment of plugin-enabled
  Moose-based classes. It extends the Moose framework via roles to enable
  this behavior.


pkgId: 556f093c90430e70fe0ad1ad3dd98833b2549fb8d23ed2e7747d4b70d58a8e14
name: perl-MooseX-OneArgNew
arch: noarch
version: 0.007
epoch: 0
release: 10.fc44
summary: Teach ->new to accept single, non-hashref arguments
url: https://metacpan.org/release/MooseX-OneArgNew
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-06.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-OneArgNew-0.007-10.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-OneArgNew-0.007-10.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::OneArgNew lets your constructor take a single argument, which will
  be translated into the value for a one-entry hashref. It is a parameterized
  role with two parameters:


pkgId: df5a2559f0927be73ea50ea918226d220b14647ea8fa834831ba016db4558d0c
name: perl-MooseX-Params-Validate
arch: noarch
version: 0.21
epoch: 0
release: 33.fc44
summary: Extension of Params::Validate using Moose's types
url: https://metacpan.org/release/MooseX-Params-Validate
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Params-Validate-0.21-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Params-Validate-0.21-33.fc44.noarch.rpm
checksum_type: sha256
description:
  This module fills a gap in Moose by adding method parameter validation to
  Moose. This is just one of many developing options, it should be considered
  the "official" one by any means though.


pkgId: 91d19dfb80f0417f2a83990f2dc9c002601517f19a178abd76e0d83e75e3f328
name: perl-MooseX-RelatedClassRoles
arch: noarch
version: 0.004
epoch: 0
release: 40.fc44
summary: Apply roles to a class related to yours
url: https://metacpan.org/release/MooseX-RelatedClassRoles
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-RelatedClassRoles-0.004-40.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-RelatedClassRoles-0.004-40.fc44.noarch.rpm
checksum_type: sha256
description:
  Frequently, you have to use a class that provides some foo_class accessor
  or attribute as a method of dependency injection. Use this role when you'd
  rather apply roles to make your custom foo_class instead of manually
  setting up a subclass.


pkgId: ce8f97c3fdfe3fc9c0adffc58c48fb2caa27795881b756f29d3132c3297a41ed
name: perl-MooseX-Role-Cmd
arch: noarch
version: 0.10
epoch: 0
release: 40.fc44
summary: Wrap system command binaries the Moose way
url: https://metacpan.org/release/MooseX-Role-Cmd
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Role-Cmd-0.10-40.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Role-Cmd-0.10-40.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::Role::Cmd is a Moose role intended to ease the task of building
  command-line wrapper modules. It automatically maps Moose objects into
  command strings which are passed to IPC::Cmd.


pkgId: 9a4f7fe52b20c45585d7c1815d2c6826d5caf0209c464f0059ae7edc24b6faca
name: perl-MooseX-Role-Parameterized
arch: noarch
version: 1.11
epoch: 0
release: 19.fc44
summary: Make your roles flexible through parameterization
url: https://metacpan.org/release/MooseX-Role-Parameterized
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-47.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Role-Parameterized-1.11-19.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Role-Parameterized-1.11-19.fc44.noarch.rpm
checksum_type: sha256
description:
  Roles are composable units of behavior. They are useful for factoring out
  functionality common to many classes from any part of your class hierarchy.
  (See Moose::Cookbook::Roles::Recipe1 for an introduction to Moose::Role.)

  While combining roles affords you a great deal of flexibility, individual
  roles have very little in the way of configurability. Core Moose provides
  alias for renaming methods to avoid conflicts, and excludes for ignoring
  methods you don't want or need (see Moose::Cookbook::Roles::Recipe2 for more
  about alias and excludes).

  Because roles serve many different masters, they usually provide only the
  least common denominator of functionality. To empower roles further, more
  configurability than alias and excludes is required. Perhaps your role needs
  to know which method to call when it is done. Or what default value to use for
  its url attribute.

  Parameterized roles offer exactly this solution.


pkgId: 2c9e9658218a057c8a7ade3d9b1be331b51c3dfded397e65fd14ac96e095fa0a
name: perl-MooseX-Role-Strict
arch: noarch
version: 0.05
epoch: 0
release: 29.fc44
summary: Use strict 'roles' in Moose
url: https://metacpan.org/release/MooseX-Role-Strict
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Role-Strict-0.05-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Role-Strict-0.05-29.fc44.noarch.rpm
checksum_type: sha256
description:
  When using Moose::Role, a class which provides a method a role provides will
  silently override that method. This can cause strange, hard-to-debug errors
  when the role's methods are not called. Simply use MooseX::Role::Strict instead
  of Moose::Role and overriding a role's method becomes a composition-time
  failure.


pkgId: a0339812f12516aea114327eb9b85c68de7f85dd6441484602cdb8eba5bce5c2
name: perl-MooseX-Role-Tempdir
arch: noarch
version: 0.101
epoch: 0
release: 21.fc44
summary: Moose role to provide temporary directories
url: https://metacpan.org/release/MooseX-Role-Tempdir
rpm_license: ISC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Role-Tempdir-0.101-21.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Role-Tempdir-0.101-21.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a very simple Moose role that provides an attribute 'tmpdir' and
  creates a temporary directory (via File::Temp) to go along with it. One
  temporary directory will be created for every object with this role, so
  keep that in mind if you're going crazy with lots of objects or
  creation/destruction.


pkgId: d934e2e0416626d88a488c2299c966c4dfdfccf73736ba80d7c58f2cd195389d
name: perl-MooseX-Role-TraitConstructor
arch: noarch
version: 0.01
epoch: 0
release: 39.fc44
summary: Wrapper for new that can accept a traits parameter
url: https://metacpan.org/release/MooseX-Role-TraitConstructor
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Role-TraitConstructor-0.01-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Role-TraitConstructor-0.01-39.fc44.noarch.rpm
checksum_type: sha256
description:
  This role allows you to easily accept a traits argument (or another name)
  into your constructor, which will easily mix roles into an anonymous class
  before construction, much like Moose::Meta::Attribute does.


pkgId: 6c2c5249e3893ab205e648933397ff9bd12096d1c737a727c77463e11c25dcb2
name: perl-MooseX-Role-WarnOnConflict
arch: noarch
version: 0.01
epoch: 0
release: 12.fc44
summary: Warn if classes override role methods without excluding them
url: http://cpan.metacpan.org/dist/MooseX-Role-WarnOnConflict/
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Role-WarnOnConflict-0.01-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Role-WarnOnConflict-0.01-12.fc44.noarch.rpm
checksum_type: sha256
description:
  When using Moose::Role, a class which provides a method a role provides
  will silently override that method. This can cause strange, hard-to-debug
  errors when the role's methods are not called. Simply use
  MooseX::Role::WarnOnConflict instead of Moose::Role and overriding a role's
  method becomes a composition-time warning. See the synopsis for a
  resolution.


pkgId: 6ddda4380dd479eaf564719cbc47bdc11c03543a6ac369c20b4f7ae4d0f4e194
name: perl-MooseX-Role-WithOverloading
arch: x86_64
version: 0.17
epoch: 0
release: 35.fc44
summary: Roles that support overloading
url: https://metacpan.org/release/MooseX-Role-WithOverloading
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Role-WithOverloading-0.17-35.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Role-WithOverloading-0.17-35.fc44.x86_64.rpm
checksum_type: sha256
description:
  MooseX::Role::WithOverloading allows you to write a Moose::Role
  that defines overloaded operators and allows those operator
  overloadings to be composed into the classes/roles/instances it's
  compiled to, while plain roles would lose the overloading.


pkgId: ce1dbc25a249aa7c403322c4753d3c7761bfda19204d78dc372d6cedb711a2a2
name: perl-MooseX-Role-XMLRPC-Client
arch: noarch
version: 0.07
epoch: 0
release: 30.fc44
summary: Provide the needed bits to be a XML-RPC client
url: https://metacpan.org/release/MooseX-Role-XMLRPC-Client
rpm_license: LicenseRef-Callaway-LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Role-XMLRPC-Client-0.07-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Role-XMLRPC-Client-0.07-30.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a Moose role that provides the methods and attributes needed
  to enable a class to serve as an XML-RPC client.  It is parameterized
  through MooseX::Role::Parameterized, so you can customize how it embeds
  in your class. You can even embed it multiple times with different
  paramaterization, if it strikes your fancy :-)


pkgId: 4dabfd687fa89cffd77e395355057ee286c9eab7d64441dea9905076d5dc1d87
name: perl-MooseX-SemiAffordanceAccessor
arch: noarch
version: 0.10
epoch: 0
release: 33.fc44
summary: Name your accessors foo() and set_foo()
url: https://metacpan.org/release/MooseX-SemiAffordanceAccessor
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-SemiAffordanceAccessor-0.10-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-SemiAffordanceAccessor-0.10-33.fc44.noarch.rpm
checksum_type: sha256
description:
  This module does not provide any methods. Simply loading it changes the
  default naming policy for the loading class so that accessors are
  separated into get and set methods. The get methods have the same name
  as the accessor, while set methods are prefixed with "set_".If you
  define an attribute with a leading underscore, then the set method will
  start with "_set_".If you explicitly set a "reader" or "writer" name
  when creating an attribute, then that attribute's naming scheme is left
  unchanged.


pkgId: fa0690e35d007d742faacab9fe27a0bcee0ee871681bf29de00d2bc1c0b9399b
name: perl-MooseX-SetOnce
arch: noarch
version: 0.203000
epoch: 0
release: 10.fc44
summary: Write-once, read-many attributes for Moose
url: https://metacpan.org/release/MooseX-SetOnce
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-SetOnce-0.203000-10.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-SetOnce-0.203000-10.fc44.noarch.rpm
checksum_type: sha256
description:
  The 'SetOnce' attribute lets your class have attributes that are not lazy
  and not set, but that cannot be altered once set.


pkgId: 28390820392d93ab6815fda48dfb569100ac09ce8a952ad7f098b19838ed8da7
name: perl-MooseX-SimpleConfig
arch: noarch
version: 0.11
epoch: 0
release: 32.fc44
summary: Moose role for setting attributes from a simple configfile
url: https://metacpan.org/release/MooseX-SimpleConfig
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-SimpleConfig-0.11-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-SimpleConfig-0.11-32.fc44.noarch.rpm
checksum_type: sha256
description:
  This role loads simple configfiles to set object attributes. It is based on
  the abstract role MooseX::ConfigFromFile, and uses Config::Any to load your
  configfile. Config::Any will in turn support any of a variety of different
  configuration formats, detected by the file extension. See Config::Any for
  more details about supported formats.


pkgId: 03280a27669077a46486b2c6d564f8148230649f0526084baae3f4133f5437c8
name: perl-MooseX-SingleArg
arch: noarch
version: 0.09
epoch: 0
release: 21.fc44
summary: No-fuss instantiation of Moose objects using a single argument
url: http://search.cpan.org/dist/MooseX-SingleArg/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-SingleArg-0.09-21.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-SingleArg-0.09-21.fc44.noarch.rpm
checksum_type: sha256
description:
  This module allows Moose instances to be constructed with a single
  argument. Your class or role must use this module and then use the
  single_arg sugar to declare which attribute will be assigned the single
  argument value.


pkgId: 58e0b2a48613f9622650a01a8f6f5a6947353163d25205dd6e597694775b18e6
name: perl-MooseX-Singleton
arch: noarch
version: 0.30
epoch: 0
release: 28.fc44
summary: Turn your Moose class into a singleton
url: https://metacpan.org/release/MooseX-Singleton
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Singleton-0.30-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Singleton-0.30-28.fc44.noarch.rpm
checksum_type: sha256
description:
  A singleton is a class that has only one instance in an application.
  MooseX::Singleton lets you easily upgrade (or downgrade, as it were) your
  Moose class to a singleton.


pkgId: 7c37c4293c07e697bb110b41bf1e84a4b658f036b7e8c9bb5a9be3e8cc389f3b
name: perl-MooseX-Storage
arch: noarch
version: 0.53
epoch: 0
release: 18.fc44
summary: A serialization framework for Moose classes
url: https://metacpan.org/release/MooseX-Storage
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Storage-0.53-18.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Storage-0.53-18.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::Storage is a serialization framework for Moose, it provides a
  very flexible and highly pluggable way to serialize Moose classes to a
  number of different formats and styles. This is still an early release
  of this module, so use with caution. It's outward facing serialization
  API should be considered stable, but I still reserve the right to make
  tweaks if I need too. Anything beyond the basic pack/unpack, freeze/thaw
  and load/store should not be relied on. There are 3 levels to the
  serialization, each of which builds upon the other and each of which
  can be customized to the specific needs of your class.


pkgId: f088717d354bbb3d5b8f4f84fd90e12b5a55899f75fb3d615ee7f1a9ca2f72ce
name: perl-MooseX-StrictConstructor
arch: noarch
version: 0.21
epoch: 0
release: 27.fc44
summary: Make your object constructors blow up on unknown attributes
url: https://metacpan.org/release/MooseX-StrictConstructor
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-StrictConstructor-0.21-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-StrictConstructor-0.21-27.fc44.noarch.rpm
checksum_type: sha256
description:
  Simply loading this module makes your constructors "strict". If your
  constructor is called with an attribute init argument that your class does
  not declare, then it calls "Carp::confess()". This is a great way to catch
  small typos.


pkgId: 1617160531d73835bb95c000231dc053183773b945882ddb72a30a1f8488f574
name: perl-MooseX-Traits
arch: noarch
version: 0.13
epoch: 0
release: 30.fc44
summary: Automatically apply roles at object creation time
url: https://metacpan.org/release/MooseX-Traits
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Traits-0.13-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Traits-0.13-30.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::Traits allows one to arbitrarily add components to an object as
  needed, w/o having to explicitly construct new classes: e.g.

      Foo->with_traits('Bar')->new(...);


pkgId: 1b6cf1701957bbada56438a7c389cab7ed4f4d20d0aec61562d3bd8914618abc
name: perl-MooseX-Traits-Pluggable
arch: noarch
version: 0.12
epoch: 0
release: 33.fc44
summary: A pluggable extension to MooseX::Traits
url: https://metacpan.org/release/MooseX-Traits-Pluggable
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Traits-Pluggable-0.12-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Traits-Pluggable-0.12-33.fc44.noarch.rpm
checksum_type: sha256
description:
  This module adds support for class precedence search for traits and some
  extra attributes, described below.

  See the MooseX::Traits man-page for more information.


pkgId: d02a6a78692f298cac1e7963925f0c4454cbddc1a3acf5247820eb81d7a98ea5
name: perl-MooseX-Types
arch: noarch
version: 0.51
epoch: 0
release: 3.fc44
summary: Organize your Moose types in libraries
url: https://metacpan.org/dist/MooseX-Types
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-0.51-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-0.51-3.fc44.noarch.rpm
checksum_type: sha256
description:
  The types provided with the Moose man page are by design global. This
  package helps you to organize and selectively import your own and the
  built-in types in libraries. As a nice side effect, it catches typos at
  compile-time too.

  However, the main reason for this module is to provide an easy way to not
  have conflicts with your type names, since the internal fully qualified
  names of the types will be prefixed with the library's name.

  This module will also provide you with some helper functions to make it
  easier to use Moose types in your code.


pkgId: f407662dcb83cb233b3cad9a04f596a91d811c2a682110278dc431840f1dfd0a
name: perl-MooseX-Types-Common-tests
arch: noarch
version: 0.001015
epoch: 0
release: 3.fc44
summary: Tests for perl-MooseX-Types-Common
url: https://metacpan.org/release/MooseX-Types-Common
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-Common-0.001015-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-Common-tests-0.001015-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-MooseX-Types-Common. Execute them
  with "/usr/libexec/perl-MooseX-Types-Common/test".


pkgId: be8c94a7cc50d0cd3325a2a7b7faf171e4f84674a3b01d1a4d4b2dafdfa953be
name: perl-MooseX-Types-DateTime
arch: noarch
version: 0.14
epoch: 0
release: 2.fc44
summary: DateTime related constraints and coercions for Moose
url: https://metacpan.org/release/MooseX-Types-DateTime
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-DateTime-0.14-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-DateTime-0.14-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This module packages several type constraints (Moose::Util::TypeConstraints)
  and coercions designed to work with the DateTime suite of objects.


pkgId: 102edbcd810e216c4657b58e3cfe74a7789fc7e19c66af6b5964a5f469d2482f
name: perl-MooseX-Types-DateTime-ButMaintained
arch: noarch
version: 0.16
epoch: 0
release: 39.fc44
summary: DateTime related constraints and coercions for Moose
url: https://metacpan.org/release/MooseX-Types-DateTime-ButMaintained
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-DateTime-ButMaintained-0.16-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-DateTime-ButMaintained-0.16-39.fc44.noarch.rpm
checksum_type: sha256
description:
  This module packages several Moose::Util::TypeConstraints with coercions,
  designed to work with the DateTime suite of objects.


pkgId: c44d04fb8b1c755c56d733b6f4b0e30cf822d27cb884d774f61cf7b3b5eba416
name: perl-MooseX-Types-DateTime-MoreCoercions
arch: noarch
version: 0.15
epoch: 0
release: 31.fc44
summary: Extensions to MooseX::Types::DateTime
url: https://metacpan.org/release/MooseX-Types-DateTime-MoreCoercions
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-46.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-DateTime-MoreCoercions-0.15-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-DateTime-MoreCoercions-0.15-31.fc44.noarch.rpm
checksum_type: sha256
description:
  This module builds on MooseX::Types::DateTime to add additional custom
  types and coercions. Since it builds on an existing type, all coercions
  and constraints are inherited.


pkgId: eec894a664026f12d76b694ac575a27077f037a3beb7e3ed5bbfd8cf3229a3c8
name: perl-MooseX-Types-DateTimeX
arch: noarch
version: 0.10
epoch: 0
release: 47.fc44
summary: Extensions to MooseX::Types::DateTime::ButMaintained
url: https://metacpan.org/release/MooseX-Types-DateTimeX
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-DateTimeX-0.10-47.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-DateTimeX-0.10-47.fc44.noarch.rpm
checksum_type: sha256
description:
  This module builds on MooseX::Types::DateTime to add additional custom
  types and coercions. Since it builds on an existing type, all coercions and
  constraints are inherited.


pkgId: ae38c69acc65dc170bb87678b362e5e3dc8512b6032ccd1678a99686b28f6b0c
name: perl-MooseX-Types-Path-Class
arch: noarch
version: 0.09
epoch: 0
release: 28.fc44
summary: A Path::Class type library for Moose
url: https://metacpan.org/release/MooseX-Types-Path-Class
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-Path-Class-0.09-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-Path-Class-0.09-28.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::Types::Path::Class creates common Moose types, coercions and option
  specifications useful for dealing with Path::Class objects as Moose attributes.

  Coercions (see Moose::Util::TypeConstraints) are made from both 'Str' and
  'ArrayRef' to both Path::Class::Dir and Path::Class::File objects.  If you
  have MooseX::Getopt installed, the Getopt option type ("=s") will be added
  for both Path::Class::Dir and Path::Class::File.


pkgId: a0d6a54f68918393e415fb74ca74517b7331fae041cf927c069723313ba362ef
name: perl-MooseX-Types-Path-Tiny
arch: noarch
version: 0.012
epoch: 0
release: 27.fc44
summary: Path::Tiny types and coercions for Moose
url: https://metacpan.org/release/MooseX-Types-Path-Tiny
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-Path-Tiny-0.012-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-Path-Tiny-0.012-27.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides Path::Tiny types for Moose. It handles two important
  types of coercion:

   * Coercing objects with overloaded stringification

   * Coercing to absolute paths

  It also can check to ensure that files or directories exist.


pkgId: 1a7ee80f3017a2a7c6889c8d5ead25861d69d427d0b174bd6637ab67306bc8c9
name: perl-MooseX-Types-Perl
arch: noarch
version: 0.101344
epoch: 0
release: 10.fc44
summary: Moose types that check against Perl syntax
url: https://metacpan.org/release/MooseX-Types-Perl
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-Perl-0.101344-10.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-Perl-0.101344-10.fc44.noarch.rpm
checksum_type: sha256
description:
  This library provides Moose types for checking things (mostly strings)
  against syntax that is, or is a reasonable subset of, Perl syntax.


pkgId: ff3203cf293dbeae8fd00c84cd2a0d95cf34404f9f83e5d22d075ce0d07aa977
name: perl-MooseX-Types-Stringlike
arch: noarch
version: 0.003
epoch: 0
release: 34.fc44
summary: Moose type constraints for strings or string-like objects
url: https://metacpan.org/release/MooseX-Types-Stringlike
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-47.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-Stringlike-0.003-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-Stringlike-0.003-34.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a more general version of the Str type. If coercions are
  enabled, it will accept objects that overload stringification and coerces them
  into strings.


pkgId: 1a700348f2b0864abe6c3e45e2c1079af4b33f7bbc07389a7fdf64414b8ff2a1
name: perl-MooseX-Types-Structured
arch: noarch
version: 0.36
epoch: 0
release: 27.fc44
summary: Structured Type Constraints for Moose
url: https://metacpan.org/release/MooseX-Types-Structured
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-Structured-0.36-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-Structured-0.36-27.fc44.noarch.rpm
checksum_type: sha256
description:
  A structured type constraint is a standard container Moose type constraint,
  such as an ArrayRef or HashRef, which has been enhanced to allow you to
  explicitly name all the allowed type constraints inside the structure.


pkgId: f1f9d38825362c47c292f90665b1265dd0b09279a2c5bed8e90a39a36dca6238
name: perl-MooseX-Types-URI
arch: noarch
version: 0.10
epoch: 0
release: 3.fc44
summary: URI related types and coercions for Moose
url: https://metacpan.org/release/MooseX-Types-URI
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Types-URI-0.10-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Types-URI-0.10-3.fc44.noarch.rpm
checksum_type: sha256
description:
  This package provides Moose types for fun (and profit) with the URI classes.

  It has slightly DWIMier types than the the URI classes have due to
  implementation details, so the types should be more forgiving when
  ducktyping will work anyway (e.g. URI::WithBase does not inherit URI).


pkgId: f7714dd54494b943445750873fc4f10f944ff270c2000eb3543b34ca02963079
name: perl-MooseX-Util
arch: noarch
version: 0.006
epoch: 0
release: 26.fc44
summary: Moose::Util extensions
url: https://metacpan.org/release/MooseX-Util
rpm_license: LicenseRef-Callaway-LGPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-01.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Util-0.006-26.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Util-0.006-26.fc44.noarch.rpm
checksum_type: sha256
description:
  This Perl module handles all of the same functions that Moose::Util handles.
  In fact, most of the functions are simply re-exports from Moose::Util.
  However, we've re-implemented a number of the functions, for a variety of
  reasons.


pkgId: d6df37a8bafc9987f881edb54617bf14fd04d3342ef90c0f9e887b85095017f0
name: perl-MooseX-Workers
arch: noarch
version: 0.24
epoch: 0
release: 34.fc44
summary: Provides a simple sub-process management for asynchronous tasks
url: https://metacpan.org/release/MooseX-Workers
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MooseX-Workers-0.24-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MooseX-Workers-0.24-34.fc44.noarch.rpm
checksum_type: sha256
description:
  MooseX::Workers is a Role that provides easy delegation of long-running
  tasks into a managed child process. Process management is taken care of via
  POE and it's POE::Wheel::Run module.


pkgId: fe3900043c1ffd570aca49853a0b45e74a31a2586082e8044fcbb8399620a6a6
name: perl-Mouse
arch: x86_64
version: 2.6.1
epoch: 0
release: 2.fc44
summary: Moose minus the antlers
url: https://metacpan.org/release/Mouse
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mouse-2.6.1-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mouse-2.6.1-2.fc44.x86_64.rpm
checksum_type: sha256
description:
  Moose, a powerful metaobject-fueled extension of the Perl 5 object system,
  is wonderful.  (For more information on Moose, please see 'perldoc Moose'
  after installing the perl-Moose package.)

  Unfortunately, it's a little slow. Though significant progress has been
  made over the years, the compile time penalty is a non-starter for some
  applications.  Mouse aims to alleviate this by providing a subset of Moose's
  functionality, faster.


pkgId: a5c9c79a39da6d9d1e255054bbff209ffa094bc0c8402cd632c853c59e6cb5c5
name: perl-MouseX-ConfigFromFile
arch: noarch
version: 0.05
epoch: 0
release: 37.fc44
summary: An abstract Mouse role for setting attributes from a config file
url: https://metacpan.org/release/MouseX-ConfigFromFile
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MouseX-ConfigFromFile-0.05-37.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MouseX-ConfigFromFile-0.05-37.fc44.noarch.rpm
checksum_type: sha256
description:
  This is an abstract role that provides an alternate constructor for creating
  objects using parameters passed in from a configuration file. The actual
  implementation of reading the configuration file is left to concrete sub-roles.

  It declares an attribute configfile and a class method new_with_config, and
  requires that concrete roles derived from it implement the class method
  get_config_from_file.

  Attributes specified directly as arguments to new_with_config supersede those
  in the configfile.


pkgId: a784f88c83421b29367da26c51b1046a95db20beeaf4f0f245bed4b8f8bba6ab
name: perl-MouseX-Foreign
arch: noarch
version: 1.000
epoch: 0
release: 30.fc44
summary: Extends non-Mouse classes as well as Mouse classes
url: https://metacpan.org/release/MouseX-Foreign
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MouseX-Foreign-1.000-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MouseX-Foreign-1.000-30.fc44.noarch.rpm
checksum_type: sha256
description:
  MouseX::Foreign Perl module provides an ability for Mouse classes to extend
  any classes, including non-Mouse classes, including Moose classes.


pkgId: e3ce6805806a875a40a44c80543d9a49be03304ecc5fa810ca9cd62ec72d02f5
name: perl-MouseX-Getopt
arch: noarch
version: 0.38
epoch: 0
release: 30.fc44
summary: Mouse role for processing command line options
url: https://metacpan.org/release/MouseX-Getopt
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MouseX-Getopt-0.38-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MouseX-Getopt-0.38-30.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a Mouse role that provides an alternate constructor for creating
  objects using parameters passed in from the command line.


pkgId: 54c48bb762671e066fb16dc79842e62989f93247d913c7502d8e7a0957f7d90a
name: perl-MouseX-NativeTraits
arch: noarch
version: 1.09
epoch: 0
release: 29.fc44
summary: Extend your attribute interfaces for Mouse
url: https://metacpan.org/release/MouseX-NativeTraits
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MouseX-NativeTraits-1.09-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MouseX-NativeTraits-1.09-29.fc44.noarch.rpm
checksum_type: sha256
description:
  While Mouse attributes provide a way to name your accessors, readers,
  writers, clearers and predicates, MouseX::NativeTraits provides commonly
  used attribute helper methods for more specific types of data.


pkgId: 44d1b6d111990c221e097ea7bdaabd9d627c4a4f16ae515af858f137bb29f1de
name: perl-MouseX-SimpleConfig
arch: noarch
version: 0.11
epoch: 0
release: 39.fc44
summary: A Mouse role for setting attributes from a simple configfile
url: https://metacpan.org/release/MouseX-SimpleConfig
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-36.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MouseX-SimpleConfig-0.11-39.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MouseX-SimpleConfig-0.11-39.fc44.noarch.rpm
checksum_type: sha256
description:
  This role loads simple configfiles to set object attributes. It is based on the
  abstract role MouseX::ConfigFromFile, and uses Config::Any to load your
  configfile. Config::Any will in turn support any of a variety of different
  config formats, detected by the file extension. See Config::Any for more
  details about supported formats.

  Like all MouseX::ConfigFromFile-derived configfile loaders, this module is
  automatically supported by the MouseX::Getopt role as well, which allows
  specifying -configfile on the command line.


pkgId: fe6c399ab2146994f905f1392a8d78acf82664246e641b68c82211e8a3857806
name: perl-MouseX-StrictConstructor
arch: noarch
version: 0.02
epoch: 0
release: 31.fc44
summary: Make your object constructors blow up on unknown attributes
url: https://metacpan.org/release/MouseX-StrictConstructor
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MouseX-StrictConstructor-0.02-31.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MouseX-StrictConstructor-0.02-31.fc44.noarch.rpm
checksum_type: sha256
description:
  Simply loading this module makes your constructors "strict". If your
  constructor is called with an attribute argument that your class does not
  declare, then it dies. This is a great way to catch small typos.


pkgId: 33a4f206c467a85be68ebdfc267074cefcc488141ff3818081d7d6c07b13c5ed
name: perl-MouseX-Types
arch: noarch
version: 0.06
epoch: 0
release: 41.fc44
summary: Organize your Mouse types in libraries
url: https://metacpan.org/release/MouseX-Types
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MouseX-Types-0.06-41.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MouseX-Types-0.06-41.fc44.noarch.rpm
checksum_type: sha256
description:
  Organize your Mouse types; much as MooseX::Types does for your Moose types.
  For more information, please see the MooseX::Types manpage.

  This library was split off from Mouse as of Mouse 0.15.


pkgId: 2a3bcb14327a9727a5c40e402bc98b89a922b58e3e35125d79ef063942b98999
name: perl-MouseX-Types-Path-Class
arch: noarch
version: 0.07
epoch: 0
release: 36.fc44
summary: A Path::Class type library for Mouse
url: https://metacpan.org/release/MouseX-Types-Path-Class
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MouseX-Types-Path-Class-0.07-36.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MouseX-Types-Path-Class-0.07-36.fc44.noarch.rpm
checksum_type: sha256
description:
  MouseX::Types::Path::Class creates common Mouse types, coercions and option
  specifications useful for dealing with Path::Class objects as Mouse attributes.

  Coercions (see Mouse::Util::TypeConstraints) are made from both Str and
  ArrayRef to both Path::Class::Dir and Path::Class::File objects. If you have
  MouseX::Getopt installed, the Getopt option type ("=s") will be added for both
  Path::Class::Dir and Path::Class::File.


pkgId: 231af3531602742ce5691712121ad58be98e259f68f65695e2806c7bdd08d6bc
name: perl-Mozilla-CA
arch: noarch
version: 20250602
epoch: 0
release: 3.fc44
summary: Mozilla's CA certificate bundle in PEM format
url: https://metacpan.org/release/Mozilla-CA
rpm_license: MPL-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mozilla-CA-20250602-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mozilla-CA-20250602-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Mozilla::CA provides a path to ca-certificates copy of Mozilla's bundle of
  certificate authority certificates in a form that can be consumed by modules
  and libraries based on OpenSSL.


pkgId: 4703ac2f13322bb937db8390bc83fc312841c3067674442d6efbc8df008ded5d
name: perl-Mozilla-PublicSuffix
arch: noarch
version: 1.0.7
epoch: 0
release: 4.fc44
summary: Get a domain name's public suffix via the Mozilla Public Suffix List
url: https://metacpan.org/release/Mozilla-PublicSuffix
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Mozilla-PublicSuffix-1.0.7-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Mozilla-PublicSuffix-1.0.7-4.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a single function that returns the public suffix of a
  domain name by referencing a parsed copy of Mozilla's Public Suffix List.
  From the official website at http://publicsuffix.org/


pkgId: 3ae8c5c5dcdf70526aac3ea3811d99d561c9df89a38601279cd8cafdf4e89a50
name: perl-MusicBrainz-DiscID
arch: x86_64
version: 0.06
epoch: 0
release: 25.fc44
summary: Perl interface for the MusicBrainz libdiscid library
url: https://metacpan.org/release/MusicBrainz-DiscID
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.rdu3.fedoraproject.org
rpm_sourcerpm: perl-MusicBrainz-DiscID-0.06-25.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-MusicBrainz-DiscID-0.06-25.fc44.x86_64.rpm
checksum_type: sha256
description:
  MusicBrainz::DiscID is a class to calculate a MusicBrainz DiscID from an
  audio CD in the drive. The coding style is slightly different to the C
  interface to libdiscid, because it makes use of perl's Object Oriented
  functionality.


pkgId: 992102a71ee2c69cbf0f65016eb4d2179a99006b1b2e972c110a9ce2cd530327
name: perl-NDBM_File
arch: x86_64
version: 1.18
epoch: 0
release: 522.fc44
summary: Tied access to ndbm files
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-5.42.0-522.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-NDBM_File-1.18-522.fc44.x86_64.rpm
checksum_type: sha256
description:
  NDBM_File establishes a connection between a Perl hash variable and a file in
  ndbm format. You can manipulate the data in the file just as if it were in
  a Perl hash, but when your program exits, the data will remain in the file, to
  be used the next time your program runs.


pkgId: 68df1927c8630541fd8eed342e5180800d51ab97a5bbd057ea3c35b96f1aa3e5
name: perl-NEXT
arch: noarch
version: 0.69
epoch: 0
release: 522.fc44
summary: Pseudo-class that allows method redispatch
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-5.42.0-522.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-NEXT-0.69-522.fc44.noarch.rpm
checksum_type: sha256
description:
  The NEXT module adds a pseudo-class named "NEXT" to any program that uses it.
  If a method "m" calls "$self->NEXT::m()", the call to "m" is redispatched as
  if the calling method had not originally been found.


pkgId: 86614e91c9a2c71fecf7cc2468771dc098f720895c8036ccbea1fba4b0915ff3
name: perl-NKF
arch: x86_64
version: 2.1.4
epoch: 1
release: 38.fc44
summary: Perl extension for Network Kanji Filter
url: http://nkf.osdn.jp/
rpm_license: Zlib
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.rdu3.fedoraproject.org
rpm_sourcerpm: nkf-2.1.4-38.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-NKF-2.1.4-38.fc44.x86_64.rpm
checksum_type: sha256
description:
  This is a Perl Extension version of nkf (Network Kanji Filter).
  It converts the last argument and return converted result.
  Conversion details are specified by flags before the last argument.


pkgId: 8c648b759b1b32355fe98fccd9e6f1583d96f0146c8d5343de6f6f79eb3ce31e
name: perl-NNTPClient
arch: noarch
version: 0.37
epoch: 0
release: 28.fc44
summary: Perl 5 module to talk to NNTP (RFC977) server
url: https://metacpan.org/release/NNTPClient
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-35.rdu3.fedoraproject.org
rpm_sourcerpm: perl-NNTPClient-0.37-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-NNTPClient-0.37-28.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements a client interface to NNTP, enabling a Perl 5
  application to talk to NNTP servers. It uses the Object Oriented
  Programming interface.


pkgId: 3af9575cc77677aab2ee628f8712784392f815ed57ab403a64b5f28f4ac4ad03
name: perl-NTLM
arch: noarch
version: 1.09
epoch: 0
release: 42.fc44
summary: NTLM Perl module
url: https://metacpan.org/release/NTLM
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-27.rdu3.fedoraproject.org
rpm_sourcerpm: perl-NTLM-1.09-42.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-NTLM-1.09-42.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides methods to use NTLM authentication.  It can be used
  as an authenticate method with the Mail::IMAPClient module to perform
  the challenge/response mechanism for NTLM connections or it can be used
  on its own for NTLM authentication with other protocols (eg. HTTP).


pkgId: cb82ed461f08db7ce791bf0a8085ae6de16b9ece9819e519ed9846a87c3a8819
name: perl-Nagios-Plugin-WWW-Mechanize
arch: noarch
version: 0.13
epoch: 0
release: 46.fc44
summary: Login to a web page as a user and get data as a Nagios plugin
url: https://metacpan.org/release/Nagios-Plugin-WWW-Mechanize
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Nagios-Plugin-WWW-Mechanize-0.13-46.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Nagios-Plugin-WWW-Mechanize-0.13-46.fc44.noarch.rpm
checksum_type: sha256
description:
  This module ties Monitoring::Plugin with WWW::Mechanize so that there's less
  code in your perl script and the most common work is done for you.


pkgId: 77d08a83fa56534f273ec343678b6fb97ed6065a2ba98a19a3e6363a2aef4f8e
name: perl-Net
arch: noarch
version: 1.04
epoch: 0
release: 522.fc44
summary: By-name interface to Perl built-in network resolver
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-5.42.0-522.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-1.04-522.fc44.noarch.rpm
checksum_type: sha256
description:
  This package provide object-oriented interface to Perl built-in gethost*(),
  getnet*(), getproto*(), and getserv*() functions.


pkgId: e9027222084a663de87d68e8b47e411dde16959a62b0fa5fb41e192d8bb826e1
name: perl-Net-AMQP
arch: noarch
version: 0.06
epoch: 0
release: 20.fc44
summary: Advanced Message Queue Protocol (de)serialization and representation
url: https://metacpan.org/release/Net-AMQP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-AMQP-0.06-20.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-AMQP-0.06-20.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements the frame (de)serialization and representation of
  the Advanced Message Queue Protocol (http://www.amqp.org/). It is to be
  used in conjunction with client or server software that does the actual
  TCP/IP communication.


pkgId: c5cc03c50df872bb2b4bbdb63ffeb83561b7d46b99cf116a19832779e4eda402
name: perl-Net-ARP
arch: x86_64
version: 1.0.12
epoch: 0
release: 16.fc44
summary: Create and Send ARP Packets
url: https://metacpan.org/release/Net-ARP
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-ARP-1.0.12-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-ARP-1.0.12-16.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module is a Perl extension to create and send ARP packets and lookup
  local or remote mac addresses. You do not need to install any additional
  libraries like Libnet to compile this extension. It uses kernel header files
  to create the packets.


pkgId: 105b571b4d7edd8ef56d27d8797bfaddf02f808ba42c4666aec3d77983dbc8c1
name: perl-Net-ASN
arch: noarch
version: 1.08
epoch: 0
release: 4.fc44
summary: Perl extension for manipulating autonomous system numbers
url: https://metacpan.org/dist/Net-ASN
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-ASN-1.08-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-ASN-1.08-4.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::ASN provides functions for parsing autonomous system numbers (ASNs) as
  defined in RFC 1771 and extended by RFC 4893, also converting between
  formats discussed in RFC 5396.


pkgId: 44104c16db019991795fbdebe5590de3c205e78f4aefd422d0a0e83aa7a422f5
name: perl-Net-Amazon
arch: noarch
version: 0.62
epoch: 0
release: 36.fc44
summary: Framework for accessing amazon.com via REST
url: https://metacpan.org/release/Net-Amazon
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Amazon-0.62-36.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Amazon-0.62-36.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::Amazon provides an object-oriented interface to amazon.com's REST
  interface. This way it's possible to create applications using Amazon's vast
  amount of data via a functional interface, without having to worry about the
  underlying communication mechanism.


pkgId: 4528095cdc2faf039c64a64eb0bed0af6a945318918095ce71f8fa0cc4508e58
name: perl-Net-Amazon-EC2-Metadata
arch: noarch
version: 0.10
epoch: 0
release: 42.fc44
summary: Retrieves data from EC2 Metadata service
url: https://metacpan.org/release/Net-Amazon-EC2-Metadata
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Amazon-EC2-Metadata-0.10-42.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Amazon-EC2-Metadata-0.10-42.fc44.noarch.rpm
checksum_type: sha256
description:
  This module queries Amazon's Elastic Compute Cloud Metadata service.
  It also fetches 'user_data' which follows the same API but is often no
  considered part of the metadata service by Amazons documentation. The
  module also ships with a command line tool ec2meta that provides the same
  data.


pkgId: 1813528af1897ebdbadcda231e3115c5b68baa4e1dca36611e4008b17ba82ec9
name: perl-Net-Amazon-S3
arch: noarch
version: 0.992
epoch: 0
release: 2.fc44
summary: Use the Amazon Simple Storage Service (S3)
url: https://metacpan.org/release/Net-Amazon-S3
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND ADSL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Amazon-S3-0.992-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Amazon-S3-0.992-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This module provides a Perlish interface to Amazon S3. From the
  developer blurb: "Amazon S3 is storage for the Internet. It is designed
  to make web-scale computing easier for developers. Amazon S3 provides a
  simple web services interface that can be used to store and retrieve any
  amount of data, at any time, from anywhere on the web. It gives any
  developer access to the same highly scalable, reliable, fast,
  inexpensive data storage infrastructure that Amazon uses to run its own
  global network of web sites. The service aims to maximize benefits of
  scale and to pass those benefits on to developers".

  To find out more about S3, please visit <http://s3.amazonaws.com/>.


pkgId: bc638ce807fa6d88ddd61bd3dc227b1c0d8ff0f86ae0ce062e82409e91d17db3
name: perl-Net-Appliance-Session
arch: noarch
version: 4.300005
epoch: 0
release: 21.fc44
summary: Run command-line sessions to network appliances
url: https://metacpan.org/release/Net-Appliance-Session
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Appliance-Session-4.300005-21.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Appliance-Session-4.300005-21.fc44.noarch.rpm
checksum_type: sha256
description:
  Use this module to establish an interactive command-line session with a
  network appliance. There is special support for moving into "privileged"
  mode and "configure" mode, along with the ability to send commands to the
  connected device and retrieve returned output.


pkgId: dfdd1baef12950d3e5793dfb4eaa7dde788c6c554419c2600358ccbcf4446d50
name: perl-Net-Async-HTTP
arch: noarch
version: 0.49
epoch: 0
release: 9.fc44
summary: Use HTTP with IO::Async
url: https://metacpan.org/dist/Net-Async-HTTP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Async-HTTP-0.49-9.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Async-HTTP-0.49-9.fc44.noarch.rpm
checksum_type: sha256
description:
  This object class implements an asynchronous HTTP user agent. It sends
  requests to servers, returning Future instances to yield responses when
  they are received. The object supports multiple concurrent connections to
  servers, and allows multiple requests in the pipeline to any one
  connection. Normally, only one such object will be needed per program to
  support any number of requests.


pkgId: 34600b1b5802104d11c37263ec0e1c3dce53fc483e3a4e9034fc9dd85d06989e
name: perl-Net-Async-HTTP-Server
arch: noarch
version: 0.15
epoch: 0
release: 3.fc44
summary: Serve HTTP with IO::Async
url: https://metacpan.org/dist/Net-Async-HTTP-Server
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-36.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Async-HTTP-Server-0.15-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Async-HTTP-Server-0.15-3.fc44.noarch.rpm
checksum_type: sha256
description:
  This module allows a program to respond asynchronously to HTTP requests, as
  part of a program based on IO::Async. An object in this class listens on a
  single port and invokes the on_request callback or subclass method whenever
  an HTTP request is received, allowing the program to respond to it.


pkgId: f55a7a0b706ee706db9a5f3f4a8a6435c2a060ba828801b0cfb5979394403855
name: perl-Net-Async-WebSocket
arch: noarch
version: 0.14
epoch: 0
release: 4.fc44
summary: Use WebSockets with IO::Async
url: https://metacpan.org/dist/Net-Async-WebSocket
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Async-WebSocket-0.14-4.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Async-WebSocket-0.14-4.fc44.noarch.rpm
checksum_type: sha256
description:
  This distribution provides modules that implement the WebSocket protocol,
  and allows either servers or clients to be written based on IO::Async.


pkgId: 044e819a1764de3b2daefe31b6567af8dc35d5c9ed7b3600d1cec28b73323dab
name: perl-Net-BGP
arch: noarch
version: 0.18
epoch: 0
release: 12.fc44
summary: Perl module for object-oriented API to the BGP protocol
url: https://metacpan.org/release/Net-BGP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-15.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-BGP-0.18-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-BGP-0.18-12.fc44.noarch.rpm
checksum_type: sha256
description:
  An implementation of the BGP-4 inter-domain routing protocol as Perl module.
  It encapsulates all of the functionality needed to establish and maintain a
  BGP peering session and exchange routing update information with the peer.
  It aims to provide a simple API to the BGP protocol for the purposes of
  automation, logging, monitoring, testing, and similar tasks using the power
  and flexibility of Perl. The module does not implement the functionality of
  a RIB (Routing Information Base) nor does it modify the kernel routing table
  of the host system. However, such operations could be implemented using the
  API provided by the module.


pkgId: 987364df95645ec7e4db45061abc833f12ce76e56404a31e47c55ac74d367da8
name: perl-Net-CIDR
arch: noarch
version: 0.27
epoch: 0
release: 2.fc44
summary: Manipulate IPv4/IPv6 netblocks in CIDR notation
url: https://metacpan.org/dist/Net-CIDR
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-CIDR-0.27-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-CIDR-0.27-2.fc44.noarch.rpm
checksum_type: sha256
description:
  The Net::CIDR package contains functions that manipulate lists of IP netblocks
  expressed in CIDR notation. The Net::CIDR functions handle both IPv4 and IPv6
  addresses.


pkgId: d791e28f53c3541af05c502e7722d28d2c629451c53b4d02aa86460caa79d218
name: perl-Net-CIDR-Lite
arch: noarch
version: 0.22
epoch: 0
release: 14.fc44
summary: Perl extension for merging IPv4 or IPv6 CIDR addresses
url: https://metacpan.org/release/Net-CIDR-Lite
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-CIDR-Lite-0.22-14.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-CIDR-Lite-0.22-14.fc44.noarch.rpm
checksum_type: sha256
description:
  Faster alternative to Net::CIDR when merging a large number of CIDR address
  ranges. Works for IPv4 and IPv6 addresses.


pkgId: 8a4cc97a17223256dd14729277605411f1eef65ff53fce9bc186ea70b8853e9e
name: perl-Net-CLI-Interact
arch: noarch
version: 2.400002
epoch: 0
release: 7.fc44
summary: Toolkit for CLI Automation
url: https://metacpan.org/release/Net-CLI-Interact
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-CLI-Interact-2.400002-7.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-CLI-Interact-2.400002-7.fc44.noarch.rpm
checksum_type: sha256
description:
  Automating command line interface (CLI) interactions is not a new idea, but
  can be tricky to implement. This module aims to provide a simple and
  manageable interface to CLI interactions, supporting:


pkgId: 90edc09142446846ce7d108ffec2acfdd264ffb511e8330fbfe10c364b8f8714
name: perl-Net-CUPS
arch: x86_64
version: 0.64
epoch: 0
release: 32.fc44
summary: Perl bindings to the CUPS C API Interface
url: https://metacpan.org/release/Net-CUPS
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-CUPS-0.64-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-CUPS-0.64-32.fc44.x86_64.rpm
checksum_type: sha256
description:
  Net::CUPS is an interface to the Common Unix Printing System API.  If you feel
  an urge to control CUPS servers via Perl, this is a good way to do it :)


pkgId: 848abf418cc9bc11c5280434c4368ae8287713bc2609a7487d296186a9051f6c
name: perl-Net-DBus
arch: x86_64
version: 1.2.0
epoch: 0
release: 21.fc44
summary: Use and provide DBus services
url: https://metacpan.org/release/Net-DBus
rpm_license: GPL-2.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-DBus-1.2.0-21.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-DBus-1.2.0-21.fc44.x86_64.rpm
checksum_type: sha256
description:
  Net::DBus provides a Perl API for the DBus message system. The DBus Perl
  interface is currently operating against the 0.33 development version of
  DBus, but should work with later versions too, providing the API changes
  have not been too drastic.


pkgId: fe34f3b602a1bcb27d0cdb51dc0d4d677db78cfaf2149006440964a37e4738ff
name: perl-Net-DBus-GLib
arch: x86_64
version: 0.33.0
epoch: 0
release: 52.fc44
summary: Perl extension for the DBus GLib bindings
url: https://metacpan.org/release/Net-DBus-GLib
rpm_license: GPL-2.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-DBus-GLib-0.33.0-52.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-DBus-GLib-0.33.0-52.fc44.x86_64.rpm
checksum_type: sha256
description:
  Net::DBus::GLib provides an extension to the Net::DBus module allowing
  integration with the GLib mainloop. To integrate with the main loop, simply
  get a connection to the bus via the methods in Net::DBus::GLib rather than
  the usual Net::DBus module. That's it - every other API remains the same.


pkgId: e7768b666bc55fd9b26cc21ae485c06eb73f9b6393b9925a4e00275c67efc104
name: perl-Net-DHCP
arch: noarch
version: 0.700
epoch: 0
release: 12.fc44
summary: Set of classes for basic handling of DHCP packets
url: https://metacpan.org/release/Net-DHCP
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-DHCP-0.700-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-DHCP-0.700-12.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::DHCP is a DHCP set of classes designed to handle basic DHCP
  handling. It can be used to develop either client, server or relays.


pkgId: 231bd5c64bbf662c85faf2478d8c64f94dcac469318478ce5e9b2fc17d2fa04d
name: perl-Net-DNS
arch: noarch
version: 1.53
epoch: 0
release: 2.fc44
summary: DNS resolver modules for Perl
url: https://www.net-dns.org
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-DNS-1.53-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-DNS-1.53-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::DNS is a collection of Perl modules that act as a Domain Name System
  (DNS) resolver. It allows the programmer to perform DNS queries that are
  beyond the capabilities of gethostbyname and gethostbyaddr.

  The programmer should be somewhat familiar with the format of a DNS packet and
  its various sections. See RFC 1035 or DNS and BIND (Albitz & Liu) for details.


pkgId: 5af10709a4d107209133e5f79328d03f8904675d230404d9122ac4a104fb9cd1
name: perl-Net-DNS-Paranoid
arch: noarch
version: 0.09
epoch: 0
release: 6.fc44
summary: Paranoid DNS resolver
url: https://metacpan.org/dist/Net-DNS-Paranoid/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-DNS-Paranoid-0.09-6.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-DNS-Paranoid-0.09-6.fc44.noarch.rpm
checksum_type: sha256
description:
  This is a wrapper module for Net::DNS.

  This module detects IP address / host names for internal servers.


pkgId: 66cf363349c0af348645b70c28c254f19b90f3f56011dbbc7b514741c2827139
name: perl-Net-DNS-Resolver-Mock
arch: noarch
version: 1.20230216
epoch: 0
release: 8.fc44
summary: Mock a DNS Resolver object for testing
url: https://metacpan.org/release/Net-DNS-Resolver-Mock
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-DNS-Resolver-Mock-1.20230216-8.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-DNS-Resolver-Mock-1.20230216-8.fc44.noarch.rpm
checksum_type: sha256
description:
  A subclass of Net::DNS::Resolver which parses a zonefile for it's data
  source. Primarily for use in testing.


pkgId: e3b0a9f6c7da6bb665d681ca70aa5543a4e5ea7fcac24a794b5ffcabd128b770
name: perl-Net-DNS-Resolver-Mock-tests
arch: noarch
version: 1.20230216
epoch: 0
release: 8.fc44
summary: Tests for perl-Net-DNS-Resolver-Mock
url: https://metacpan.org/release/Net-DNS-Resolver-Mock
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-DNS-Resolver-Mock-1.20230216-8.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-DNS-Resolver-Mock-tests-1.20230216-8.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Net-DNS-Resolver-Mock. Execute them
  with "/usr/libexec/perl-Net-DNS-Resolver-Mock/test".


pkgId: b45477280e890f8fee6be7b28a6ed966c2a4d318bc7692a73565f17d5915c87d
name: perl-Net-DNS-Resolver-Programmable
arch: noarch
version: 0.009
epoch: 0
release: 24.fc44
summary: Programmable DNS resolver class for offline emulation of DNS
url: https://metacpan.org/release/Net-DNS-Resolver-Programmable
rpm_license: GPL-2.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-43.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-DNS-Resolver-Programmable-0.009-24.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-DNS-Resolver-Programmable-0.009-24.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::DNS::Resolver::Programmable is a Net::DNS::Resolver descendant class
  that allows a virtual DNS to be emulated instead of querying the real DNS.
  A set of static DNS records may be supplied, or arbitrary code may be
  specified as a means for retrieving DNS records, or even generating them
  on the fly.


pkgId: 29f36fe3d51508fef01a38b95b7cd6674c134f963842aa64061a6f16a886c2e6
name: perl-Net-DNS-SEC
arch: x86_64
version: 1.27
epoch: 0
release: 1.fc44
summary: DNSSEC modules for Perl
url: https://metacpan.org/release/Net-DNS-SEC
rpm_license: HPND-MIT-disclaimer
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-DNS-SEC-1.27-1.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-DNS-SEC-1.27-1.fc44.x86_64.rpm
checksum_type: sha256
description:
  Net::DNS::SEC is installed as an extension to an existing Net::DNS
  installation providing packages to support DNSSEC as specified in
  RFC4033, RFC4034, RFC4035 and related documents.

  It also provides support for SIG0 which is useful for dynamic updates.

  It implements cryptographic signature generation and verification functions
  using RSA, DSA, ECDSA, and Edwards curve algorithms.


pkgId: 7a6f91f1480a3f5470fb8087e31620390bec9ebf3ed5e89c5a9080c2750c4b91
name: perl-Net-Daemon
arch: noarch
version: 0.49
epoch: 0
release: 17.fc44
summary: Perl extension for portable daemons
url: https://metacpan.org/release/Net-Daemon
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-06.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Daemon-0.49-17.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Daemon-0.49-17.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::Daemon is an abstract base class for implementing portable server
  applications in a very simple way. The module is designed for Perl 5.006 and
  ithreads (and higher), but can work with fork() and Perl 5.004.

  The Net::Daemon class offers methods for the most common tasks a daemon
  needs: Starting up, logging, accepting clients, authorization, restricting
  its own environment for security and doing the true work. You only have to
  override those methods that aren't appropriate for you, but typically
  inheriting will safe you a lot of work anyways.


pkgId: 39198daf657d3770da16d1d370be775d87ff43f896f294c6d47849bb3e98575a
name: perl-Net-Domain-TLD
arch: noarch
version: 1.75
epoch: 0
release: 28.fc44
summary: Work with TLD names
url: https://metacpan.org/release/Net-Domain-TLD
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Domain-TLD-1.75-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Domain-TLD-1.75-28.fc44.noarch.rpm
checksum_type: sha256
description:
  The purpose of this module is to provide user with current list of
  available top level domain names including new ICANN additions and ccTLDs.


pkgId: 13ee68e4aabe35be4f8d39d87d904b87faf18eb963110a2129994526f6cf8cbb
name: perl-Net-FTP-AutoReconnect-tests
arch: noarch
version: 0.3
epoch: 0
release: 46.fc44
summary: Tests for perl-Net-FTP-AutoReconnect
url: https://metacpan.org/release/Net-FTP-AutoReconnect
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-36.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-FTP-AutoReconnect-0.3-46.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-FTP-AutoReconnect-tests-0.3-46.fc44.noarch.rpm
checksum_type: sha256
description:
  Tests from perl-Net-FTP-AutoReconnect. Execute them
  with "/usr/libexec/perl-Net-FTP-AutoReconnect/test".


pkgId: 9457f7f475285b306ce39d20a2fec9b981fa3cd2dd6901a81065be84a6afcbdc
name: perl-Net-FTP-RetrHandle
arch: noarch
version: 0.2
epoch: 0
release: 45.fc44
summary: File reading interface for reading files on a remote FTP server
url: https://metacpan.org/release/Net-FTP-RetrHandle
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-FTP-RetrHandle-0.2-45.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-FTP-RetrHandle-0.2-45.fc44.noarch.rpm
checksum_type: sha256
description:
  This Perl module provides a file reading interface for reading all or parts of
  files located on a remote FTP server, including emulation of seek and support
  for downloading only the parts of the file requested.

  Support for skipping the beginning of the file is implemented with the FTP REST
  command, which starts a retrieval at any point in the file. Support for
  skipping the end of the file is implemented with the FTP ABOR command, which
  stops the transfer. With these two commands and some careful tracking of the
  current file position, we're able to reliably emulate a seek/read pair, and get
  only the parts of the file that are actually read.

  This was originally designed for use with Archive::Zip; it's reliable enough
  that the table of contents and individual files can be extracted from a remote
  ZIP archive without downloading the whole thing.

  An interface compatible with IO::Handle is provided, along with a tie-based
  interface.


pkgId: d131f85557473d3f2d578fe0846004b1f1ca8dfaac116dcbd6f8af155191ff87
name: perl-Net-FTPSSL
arch: noarch
version: 0.42
epoch: 0
release: 20.fc44
summary: Perl module for FTP over SSL/TLS
url: https://metacpan.org/release/Net-FTPSSL
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-FTPSSL-0.42-20.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-FTPSSL-0.42-20.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::FTPSSL is a class implementing a simple FTP client over a Secure
  Sockets Layer (SSL) or Transport Layer Security (TLS) connection written in
  Perl as described in RFC959 and RFC2228. It will use TLS by default.


pkgId: a41bdcb1bc31753e50bc3dada26f66edd9cb252d8bf6ec4c5f391a8b36d0e7f8
name: perl-Net-FTPServer
arch: noarch
version: 1.125
epoch: 0
release: 34.fc44
summary: Secure, extensible and configurable Perl FTP server
url: https://metacpan.org/release/Net-FTPServer
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-FTPServer-1.125-34.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-FTPServer-1.125-34.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::FTPServer is a secure, extensible and configurable FTP server
  written in Perl.

  This package contains the Perl modules. Install the perl-ftpd package for
  the server executables.


pkgId: 6de8c0e3f04af87c0c9dd173b44d8ad10a0deb0b95df3b19509e13acae3c61cd
name: perl-Net-GPSD
arch: noarch
version: 0.39
epoch: 0
release: 43.fc44
summary: Provides an object client interface to the gpsd server daemon
url: https://metacpan.org/release/Net-GPSD
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-GPSD-0.39-43.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-GPSD-0.39-43.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::GPSD provides an object client interface to the gpsd server daemon.
  gpsd is an open source GPS daemon from http://gpsd.berlios.de/.


pkgId: 24851b46ab74bbe2fc01a957d3a25d1c7b8ed1ba4d33c1d9914c57f575e557bd
name: perl-Net-HTTP
arch: noarch
version: 6.24
epoch: 0
release: 2.fc44
summary: Low-level HTTP connection (client)
url: https://metacpan.org/release/Net-HTTP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-HTTP-6.24-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-HTTP-6.24-2.fc44.noarch.rpm
checksum_type: sha256
description:
  The Net::HTTP class is a low-level HTTP client. An instance of the
  Net::HTTP class represents a connection to an HTTP server. The HTTP
  protocol is described in RFC 2616. The Net::HTTP class supports HTTP/1.0
  and HTTP/1.1.


pkgId: 042f6fbd9a84ae505a3e16cf8977919dc17c5cc92f9e68970fb28d751405202c
name: perl-Net-IDN-Encode
arch: x86_64
version: 2.500
epoch: 0
release: 27.fc44
summary: Internationalizing Domain Names in Applications (IDNA)
url: https://metacpan.org/release/Net-IDN-Encode
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-IDN-Encode-2.500-27.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IDN-Encode-2.500-27.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module provides an easy-to-use interface for encoding and decoding
  Internationalized Domain Names (IDNs).


pkgId: 5bef3175ead3ee1af58dd95f00506dc6208402cbd5283789994c58e94a9842eb
name: perl-Net-IDN-Nameprep
arch: noarch
version: 1.102
epoch: 0
release: 32.fc44
summary: Stringprep Profile for Internationalized Domain Names (RFC 3491)
url: https://metacpan.org/release/Net-IDN-Nameprep
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-19.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-IDN-Nameprep-1.102-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IDN-Nameprep-1.102-32.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements the nameprep specification, which describes how to
  prepare internationalized domain name (IDN) labels in order to increase the
  likelihood that name input and name comparison work in ways that make sense
  for typical users throughout the world. Nameprep is a profile of the
  stringprep protocol and is used as part of a suite of on-the-wire protocols
  for internationalizing the Domain Name System (DNS).


pkgId: d64947f0a4510ba470d79886878d25c8073fc8eff4fe8911db0bc06bef8d1eb9
name: perl-Net-IDN-PP
arch: noarch
version: 0.02
epoch: 0
release: 2.fc44
summary: Pure-Perl implementation of the IDN Punycode algorithm
url: https://metacpan.org/dist/Net-IDN-PP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-IDN-PP-0.02-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IDN-PP-0.02-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::IDN::PP is a pure Perl IDN encoder/decoder. The decode() method takes
  an "A-label" and decodes it, and encode() takes a "U-label" and encodes it.


pkgId: 58c93ad18cd9dd33bd9f1a983f52783501779670740e626178cffbf62c7b56dd
name: perl-Net-IMAP-Client
arch: noarch
version: 0.9511
epoch: 0
release: 2.fc44
summary: IMAP client library for Perl
url: https://metacpan.org/release/Net-IMAP-Client
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-IMAP-Client-0.9511-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IMAP-Client-0.9511-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::IMAP::Client provides methods to access an IMAP server. It aims to
  provide a simple and clean API, while employing a rigorous parser for IMAP
  responses in order to create Perl data structures from them. The code is
  simple, clean and extensible.


pkgId: c0e818043bcf85cf500e2af2de2ab4971b5bc7959d00c3116fa811c07b192cdf
name: perl-Net-IP
arch: noarch
version: 1.26
epoch: 0
release: 37.fc44
summary: Perl module for manipulation of IPv4 and IPv6 addresses
url: https://metacpan.org/release/Net-IP
rpm_license: HPND AND (GPL-1.0-or-later OR Artistic-1.0-Perl)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-IP-1.26-37.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IP-1.26-37.fc44.noarch.rpm
checksum_type: sha256
description:
  This is the Net::IP module, designed to allow easy manipulation of IPv4 and
  IPv6 addresses.

  Two applications using the Net::IP module are included: ipcount, an IP address
  mini-calculator, which can calculate the number of IP addresses in a prefix or
  all the prefixes contained in a given range; and iptab, which prints out a
  handy IP "cheat sheet".


pkgId: 934936558418de138127df71b75496150f0dfa9a52b9f12a686eff53e52ed0b7
name: perl-Net-IP-CMatch
arch: x86_64
version: 0.02
epoch: 0
release: 61.fc44
summary: Efficiently match IP addresses against IP ranges with C
url: https://metacpan.org/release/Net-IP-CMatch
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-IP-CMatch-0.02-61.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IP-CMatch-0.02-61.fc44.x86_64.rpm
checksum_type: sha256
description:
  Net::IP::CMatch is based upon, and does the same thing as Net::IP::Match. The
  unconditionally exported subroutine 'match_ip' determines if the IP to match
  (first argument) matches any of the subsequent IP arguments. Match arguments
  may be absolute quads, as '127.0.0.1', or contain mask bits as
  '111.245.76.248/29'. A true return value indicates a match. It was written in
  C, rather than a macro, preprocessed through perl's source filter mechanism
  (as is Net::IP::Match), so that the IP arguments could be traditional perl
  scalars. The C code is lean and mean (IMHO).


pkgId: 6c0892672c2e52430a29bf511ef87b19521313a17634e8f7f60b469b31defb96
name: perl-Net-IP-Match-Regexp
arch: noarch
version: 1.01
epoch: 0
release: 41.fc44
summary: Efficiently match IP addresses against ranges
url: https://metacpan.org/release/Net-IP-Match-Regexp
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-IP-Match-Regexp-1.01-41.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IP-Match-Regexp-1.01-41.fc44.noarch.rpm
checksum_type: sha256
description:
  This module allows you to check an IP address against one or more IP
  ranges. It employs Perl's highly optimized regular expression engine to do
  the hard work, so it is very fast. It is optimized for speed by doing the
  match against a regexp which implicitly checks the broadest IP ranges
  first. An advantage is that the regexp can be computed and stored in
  advance (in source code, in a database table, etc) and reused, saving much
  time if the IP ranges don't change too often. The match can optionally
  report a value (e.g. a network name) instead of just a boolean, which makes
  module useful for mapping IP ranges to names or codes or anything else.


pkgId: d6081afdb7385bd9cfb464e15ef7255b7439e624d4be3d05dd036a1a7d8f4e0b
name: perl-Net-IP-Minimal
arch: noarch
version: 0.06
epoch: 0
release: 33.fc44
summary: Minimal functions from Net::IP
url: https://metacpan.org/release/Net-IP-Minimal
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-IP-Minimal-0.06-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IP-Minimal-0.06-33.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::IP is very feature complete, but I found I was only using three of its
  functions and it uses quite a bit of memory.


pkgId: f7f552df3b0d13f016a1f45b76e057d297f67d74d034e7e38a9c07092d942658
name: perl-Net-IPv4Addr
arch: noarch
version: 0.10
epoch: 0
release: 51.fc44
summary: Perl extension for manipulating IPv4 addresses
url: https://metacpan.org/release/Net-IPv4Addr
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-IPv4Addr-0.10-51.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IPv4Addr-0.10-51.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::IPv4Addr provides functions for parsing IPv4 addresses both in traditional
  address/netmask format and in the new CIDR format. There are also methods for
  calculating the network and broadcast address and also to see check if a given
  address is in a specific network.


pkgId: 36f995993006d0ecd4e94c77d55531f81d350b9f61a1cc91c60feba01938e21f
name: perl-Net-IPv6Addr
arch: noarch
version: 1.02
epoch: 0
release: 14.fc44
summary: Perl module to check validity of IPv6 addresses
url: https://metacpan.org/release/Net-IPv6Addr
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-IPv6Addr-1.02-14.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IPv6Addr-1.02-14.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::IPv6Addr checks strings for valid IPv6 addresses, as specified in
  RFC1884. You throw possible addresses at it, it either accepts them or throws
  an exception.


pkgId: b9b0026229993cfa6cfe7d4daf9738398edaefe96f9745b516480512badec78b
name: perl-Net-Jabber
arch: noarch
version: 2.0
epoch: 0
release: 57.fc44
summary: Jabber Perl Library
url: https://metacpan.org/release/Net-Jabber
rpm_license: ( GPL-1.0-or-later OR Artistic-1.0-Perl ) OR LGPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Jabber-2.0-57.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Jabber-2.0-57.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::Jabber provides a Perl user with access to the Jabber Instant
  Messaging protocol.

  For more information about Jabber visit:

      http://www.jabber.org


pkgId: d3a5051ed320c5f650dbecbaccbff9e1514bd1528304d8a67d5870793184ffab
name: perl-Net-LDAP-DSML
arch: noarch
version: 0.68
epoch: 1
release: 17.fc44
summary: DSML Writer for Net::LDAP
url: https://metacpan.org/release/perl-ldap
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-LDAP-0.68-17.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-LDAP-DSML-0.68-17.fc44.noarch.rpm
checksum_type: sha256
description:
  Directory Service Markup Language (DSML) is the XML standard for representing
  directory service information in XML. At the moment this Perl module only
  writes DSML entry and schema entities. Reading DSML entities is a future
  project.


pkgId: f4b920516487b13caf67ff458a5550f1b3a057e4576e9cbd30abdb5cc69c08c7
name: perl-Net-LDAP-Server
arch: noarch
version: 0.43
epoch: 0
release: 29.fc44
summary: Net::LDAP::Server Perl module
url: https://metacpan.org/release/Net-LDAP-Server
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-LDAP-Server-0.43-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-LDAP-Server-0.43-29.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::LDAP::Server provides the protocol handling for an LDAP server. You
  can subclass it and implement the methods you need. Then you just
  instantiate your subclass and call its C<handle> method to establish a
  connection with the client.


pkgId: ff18ed3999827cb10a202eb52f7d3a5b5611fa042c8d64d697c34f07e398c662
name: perl-Net-LibIDN
arch: x86_64
version: 0.12
epoch: 0
release: 55.fc44
summary: Perl bindings for GNU LibIDN
url: https://metacpan.org/release/Net-LibIDN
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-LibIDN-0.12-55.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-LibIDN-0.12-55.fc44.x86_64.rpm
checksum_type: sha256
description:
  Provides perl bindings for GNU Libidn, a C library for handling
  Internationalized Domain Names according to IDNA (RFC 3490), in
  a way very much inspired by Turbo Fredriksson's PHP-IDN.


pkgId: cf19d76c3afb38d2e86d092cb65e774704e6047ab6ab4f854978552a5b107199
name: perl-Net-LibIDN2
arch: x86_64
version: 1.02
epoch: 0
release: 12.fc44
summary: Perl binding for GNU Libidn2
url: https://metacpan.org/release/Net-LibIDN2
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-LibIDN2-1.02-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-LibIDN2-1.02-12.fc44.x86_64.rpm
checksum_type: sha256
description:
  This Perl module provides bindings for GNU Libidn2, a C library for handling
  internationalized domain names according to IDNA 2008 (RFC 5890, RFC 5891,
  RFC 5892, RFC 5893).


pkgId: 731c5e29f8c93867390ca4cbccb5e37cda1fd4fb5006ece5133136b4c226b625
name: perl-Net-MQTT-Simple
arch: noarch
version: 1.33
epoch: 0
release: 2.fc44
summary: Minimal MQTT version 3 interface
url: https://metacpan.org/release/Net-MQTT-Simple
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-MQTT-Simple-1.33-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-MQTT-Simple-1.33-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This module consists of only one file and has no dependencies except core
  Perl modules, making it suitable for embedded installations where CPAN
  installers are unavailable and resources are limited. Only basic MQTT
  functionality is provided.


pkgId: ce8252c78de7114f164ece9315e4a516ea6703d395558360c22e5836220b9176
name: perl-Net-NBName
arch: noarch
version: 0.26
epoch: 0
release: 55.fc44
summary: NetBIOS Name Service Requests
url: https://metacpan.org/release/Net-NBName
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-NBName-0.26-55.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-NBName-0.26-55.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::NBName is a class that allows you to perform simple NetBIOS Name
  Service Requests in your Perl code. It performs these NetBIOS operations
  over TCP/IP using Perl's built-in socket support.


pkgId: 7d72f793ed1c9ce9819a7cbb2bbd17d9b2a8b86d86c039c04883e10d097eb45a
name: perl-Net-Netmask
arch: noarch
version: 2.0003
epoch: 0
release: 3.fc44
summary: Perl module for manipulating and looking up IP network blocks
url: https://metacpan.org/release/Net-Netmask
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-31.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Netmask-2.0003-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Netmask-2.0003-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::Netmask parses and understands IPv4 and IPv6 CIDR blocks (see
  <https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing> for more
  information on CIDR blocks). There are also functions to insert a network
  block into a table and then later look up network blocks by an IP address
  using that table.


pkgId: 9978556ac30451f156fa9102447be477d9911c09b235fefeffd06675fa8ac9c2
name: perl-Net-OAuth
arch: noarch
version: 0.31
epoch: 0
release: 3.fc44
summary: OAuth protocol support library for Perl
url: https://metacpan.org/release/Net-OAuth
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-OAuth-0.31-3.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-OAuth-0.31-3.fc44.noarch.rpm
checksum_type: sha256
description:
  Perl implementation of OAuth, an open protocol to allow secure API
  authentication in a simple and standard method from desktop and web
  applications. In practical terms, a mechanism for a Consumer to request
  protected resources from a Service Provider on behalf of a user.


pkgId: 2bc06696607361a09656e9e0703c76bdff451455be55eabe0b0a03441d1d2583
name: perl-Net-OpenID-Common
arch: noarch
version: 1.20
epoch: 0
release: 29.fc44
summary: Libraries shared between Net::OpenID::Consumer and Net::OpenID::Server
url: https://metacpan.org/release/Net-OpenID-Common
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-22.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-OpenID-Common-1.20-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-OpenID-Common-1.20-29.fc44.noarch.rpm
checksum_type: sha256
description:
  The Consumer and Server implementations share a few libraries which live
  with this module. This module is here largely to hold the version number
  and this documentation, though it also incorporates some utility functions
  inherited from previous versions of Net::OpenID::Consumer.


pkgId: 25e9b3f85bcac2ede334459504a180028e5a3466c7f9f56cb4867841c1436a0b
name: perl-Net-OpenID-Consumer
arch: noarch
version: 1.18
epoch: 0
release: 29.fc44
summary: Library for consumers of OpenID identities
url: https://metacpan.org/release/Net-OpenID-Consumer
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND LicenseRef-Fedora-Public-Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-OpenID-Consumer-1.18-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-OpenID-Consumer-1.18-29.fc44.noarch.rpm
checksum_type: sha256
description:
  This is the Perl API for (the consumer half of) OpenID, a distributed
  identity system based on proving you own a URL, which is then your
  identity.


pkgId: 2dba316c7d044a3d44a1a3588d47e215bfe815c04ebaa052495c4677cc12bf69
name: perl-Net-OpenID-Server
arch: noarch
version: 1.09
epoch: 0
release: 32.fc44
summary: Library for building your own OpenID server/provider
url: https://metacpan.org/release/Net-OpenID-Server
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND LicenseRef-Fedora-Public-Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-OpenID-Server-1.09-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-OpenID-Server-1.09-32.fc44.noarch.rpm
checksum_type: sha256
description:
  This is the Perl API for (the server half of) OpenID, a distributed
  identity system based on proving you own a URL, which is then your
  identity.


pkgId: 605d0f390cf6067f31b25ce8957a176a081d88fb9589000643a47725b5a49b43
name: perl-Net-POP3S
arch: noarch
version: 0.12
epoch: 0
release: 16.fc44
summary: SSL/STARTTLS support for Net::POP3
url: https://metacpan.org/release/Net-POP3S
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-POP3S-0.12-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-POP3S-0.12-16.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements a wrapper for Net::POP3, enabling over-SSL/STARTTLS
  support. This module inherits all the methods from Net::POP3. You may use
  all the friendly options that came bundled with Net::POP3. You can control
  the SSL usage with the options of new() constructor method. 'doSSL' option
  is the switch, and, If you would like to control detailed SSL settings, you
  can set SSL_* options that are brought from IO::Socket::SSL. Please see the
  document of IO::Socket::SSL about these options detail.


pkgId: 6ab1f4903d2fba05a0cf329e5c1ed0a9670fc11ca813f1e1586bf6eced7cffed
name: perl-Net-Patricia
arch: x86_64
version: 1.24
epoch: 0
release: 2.fc44
summary: Patricia Trie perl module for fast IP address lookups
url: https://metacpan.org/release/Net-Patricia
rpm_license: GPL-2.0-or-later AND LicenseRef-Callaway-BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Patricia-1.24-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Patricia-1.24-2.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module uses a Patricia Trie data structure to quickly perform IP
  address prefix matching for applications such as IP subnet, network or
  routing table lookups.  The data structure is based on a radix tree using a
  radix of two, so sometimes you see patricia implementations called "radix"
  as well.  The term "Trie" is derived from the word "retrieval" but is
  pronounced like "try".  Patricia stands for "Practical Algorithm to
  Retrieve Information Coded as Alphanumeric", and was first suggested for
  routing table lookups by Van Jacobsen.  Patricia Trie performance
  characteristics are well-known as it has been employed for routing table
  lookups within the BSD kernel since the 4.3 Reno release.


pkgId: 8f9fe1f8a6a839d1cb20cf47a02b736f25eab8d923423858b914fe22f9218fcc
name: perl-Net-Pcap-Easy
arch: noarch
version: 1.4210
epoch: 0
release: 33.fc44
summary: Convenience functions to make Net::Pcap easier to use
url: https://metacpan.org/release/Net-Pcap-Easy
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Pcap-Easy-1.4210-33.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Pcap-Easy-1.4210-33.fc44.noarch.rpm
checksum_type: sha256
description:
  This module is little more than a collection of macros and convenience
  functions. Net::Pcap does all the real work (of lifting libpcap into
  perl anyway).


pkgId: 1b7006c528f0548e4fb54f402620d1f0d9e81590f9d4d24189f1eb56ffbe60b7
name: perl-Net-Ping-External
arch: noarch
version: 0.15
epoch: 0
release: 35.fc44
summary: Cross-platform interface to ICMP "ping" utilities
url: https://metacpan.org/release/Net-Ping-External
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Ping-External-0.15-35.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Ping-External-0.15-35.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::Ping::External is a module which interfaces with the "ping" command on
  many systems. It presently provides a single function, ping(), that takes
  in a hostname and (optionally) a timeout and returns true if the host is
  alive, and false otherwise. Unless you have the ability (and willingness)
  to run your scripts as the superuser on your system, this module will
  probably provide more accurate results than Net::Ping will.


pkgId: 06261333a8212bc15c903aaf29629a71a93a55781e8568d1b7009cde523f47ff
name: perl-Net-Random
arch: noarch
version: 2.33
epoch: 0
release: 2.fc44
summary: A module gets random data from online sources
url: https://metacpan.org/release/Net-Random
rpm_license: GPL-2.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Random-2.33-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Random-2.33-2.fc44.noarch.rpm
checksum_type: sha256
description:
  This module can get random data from online sources such as websites.

  This module is unsupported, unmaintained, obsolete, and DEPRECATED.
  It is recommended to switch to using Crypt::URandom.


pkgId: 528246f98bd27d329fe014f41d3ad628f3370d7761e3ce79997cfc635d081433
name: perl-Net-RawIP
arch: x86_64
version: 0.25
epoch: 0
release: 55.fc44
summary: Perl extension for manipulating raw IP packets using libpcap
url: https://metacpan.org/release/Net-RawIP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-RawIP-0.25-55.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-RawIP-0.25-55.fc44.x86_64.rpm
checksum_type: sha256
description:
  This package provides a Perl class  which can be used for creating,
  manipulating and sending raw IP packets with optional features for
  manipulating Ethernet headers.


pkgId: bc9734efbf125c879bc546b08b50f68a12be616d0b8b16c30be9840d1fb3859e
name: perl-Net-SFTP
arch: noarch
version: 0.12
epoch: 0
release: 23.fc44
summary: Secure File Transfer Protocol client
url: https://metacpan.org/release/Net-SFTP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-SFTP-0.12-23.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SFTP-0.12-23.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::SFTP is a pure-Perl implementation of the Secure File Transfer
  Protocol (SFTP) - file transfer built on top of the SSH2 protocol.
  Net::SFTP uses Net::SSH::Perl to build a secure, encrypted tunnel through
  which files can be transferred and managed. It provides a subset of the
  commands listed in the SSH File Transfer Protocol IETF draft, which can be
  found at http://www.openssh.com/txt/draft-ietf-secsh-filexfer-00.txt.


pkgId: 2de021ad7aa917b2cb962ace0ca46f9f9050dcb005043269a335ed3605a4526d
name: perl-Net-SFTP-Foreign
arch: noarch
version: 1.93
epoch: 0
release: 16.fc44
summary: SSH File Transfer Protocol client
url: https://metacpan.org/release/Net-SFTP-Foreign
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-SFTP-Foreign-1.93-16.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SFTP-Foreign-1.93-16.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::SFTP::Foreign is a Perl client for the SFTP version 3 as defined in the SSH
  File Transfer Protocol IETF draft, draft-ietf-secsh-filexfer-02.txt, included on
  this package distribution, on the rfc directory.

  Net::SFTP::Foreign uses any compatible ssh command installed on the system (for
  instance, OpenSSH ssh) to establish the secure connection to the remote server.

  A wrapper module Net::SFTP::Foreign::Compat is also provided for compatibility
  with Net::SFTP.


pkgId: 5d128a7a1bf77fba0e1ec42caf012474b0b6fbdcfb785ffc56ac355f53199cf9
name: perl-Net-SMTPS
arch: noarch
version: 0.10
epoch: 0
release: 18.fc44
summary: SSL/STARTTLS support for Net::SMTP
url: https://metacpan.org/release/Net-SMTPS
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-SMTPS-0.10-18.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SMTPS-0.10-18.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements a wrapper for Net::SMTP, enabling over-SSL/STARTTLS
  support. This module inherits all the methods from Net::SMTP. You may use
  all the friendly options that came bundled with Net::SMTP. You can control
  the SSL usage with the options of new() constructor method. 'doSSL' option
  is the switch, and, If you would like to control detailed SSL settings, you
  can set SSL_* options that are brought from IO::Socket::SSL. Please see the
  document of IO::Socket::SSL about these options detail.


pkgId: 90baa30b86485f702e11cf568df0b634158177b85da2dcbdddb1e226a4e5f5a0
name: perl-Net-SNMP
arch: noarch
version: 6.0.1
epoch: 0
release: 45.fc44
summary: Object oriented interface to SNMP
url: https://metacpan.org/release/Net-SNMP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-SNMP-6.0.1-45.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SNMP-6.0.1-45.fc44.noarch.rpm
checksum_type: sha256
description:
  The Net::SNMP module implements an object oriented interface to the
  Simple Network Management Protocol.  Perl applications can use the
  module to retrieve or update information on a remote host using the
  SNMP protocol.  The module supports SNMP version-1, SNMP version-2c
  (Community-Based SNMPv2), and SNMP version-3.  The Net::SNMP module
  assumes that the user has a basic understanding of the Simple Network
  Management Protocol and related network management concepts.


pkgId: 7a82c2f2f3a5396a9272cdf72218b2ae655b389672373234ca1fe161179fe24f
name: perl-Net-SSH
arch: noarch
version: 0.09
epoch: 0
release: 48.fc44
summary: Perl extension for secure shell
url: https://metacpan.org/release/Net-SSH
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-SSH-0.09-48.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSH-0.09-48.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to ssh.  It is a simple
  wrapper around the system `ssh' command.  For an all-perl
  implementation that does not require the system `ssh' command, see
  Net::SSH::Perl.


pkgId: f61401b60e16ad38998c9072d6c5a8ffe092baf9b1b83a6243e006b05ce69161
name: perl-Net-SSH-Perl
arch: x86_64
version: 2.144
epoch: 0
release: 2.fc44
summary: SSH (Secure Shell) client
url: https://metacpan.org/release/Net-SSH-Perl
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-SSH-Perl-2.144-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSH-Perl-2.144-2.fc44.x86_64.rpm
checksum_type: sha256
description:
  Net::SSH::Perl is a mostly-Perl module implementing an SSH (Secure Shell)
  client. It is compatible with both the SSH-1 and SSH-2 protocols.


pkgId: c6738c3114530b31731fd1f99cb82094d09343702b9f4357cb18a98004c0e23f
name: perl-Net-SSH2
arch: x86_64
version: 0.74
epoch: 0
release: 5.fc44
summary: Support for the SSH 2 protocol via libSSH2
url: https://metacpan.org/release/Net-SSH2
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-SSH2-0.74-5.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSH2-0.74-5.fc44.x86_64.rpm
checksum_type: sha256
description:
  Net::SSH2 is a perl interface to the libssh2 (http://www.libssh2.org)
  library. It supports the SSH2 protocol (there is no support for SSH1) with
  all of the key exchanges, ciphers, and compression of libssh2.


pkgId: f06df9873941e497a1cd3bf5c13c9f3f0a94cadaa055684cd358c82afd2a1092
name: perl-Net-SSLGlue
arch: noarch
version: 1.058
epoch: 0
release: 28.fc44
summary: Add/extend SSL support for common perl modules
url: https://metacpan.org/release/Net-SSLGlue
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-13.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-SSLGlue-1.058-28.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSLGlue-1.058-28.fc44.noarch.rpm
checksum_type: sha256
description:
  Some commonly used perl modules don't have SSL support at all, even if the
  protocol would support it. Others have SSL support, but most of them don't
  do proper checking of the servers certificate.

  The Net::SSLGlue::* modules try to add SSL support or proper certificate to
  these modules. Currently is support for the following modules available:

  - Net::SMTP - add SSL from beginning or using STARTTLS
  - Net::LDAP - add proper certificate checking
  - LWP - add proper certificate checking


pkgId: 21ac409aaa96d6fcd8a05d138291308d53a238c45fe2079573ec4f510762d38f
name: perl-Net-SSLeay
arch: x86_64
version: 1.94
epoch: 0
release: 12.fc44
summary: Perl extension for using OpenSSL
url: https://metacpan.org/release/Net-SSLeay
rpm_license: Artistic-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-SSLeay-1.94-12.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSLeay-1.94-12.fc44.x86_64.rpm
checksum_type: sha256
description:
  This module offers some high level convenience functions for accessing
  web pages on SSL servers (for symmetry, same API is offered for
  accessing http servers, too), a sslcat() function for writing your own
  clients, and finally access to the SSL API of SSLeay/OpenSSL package
  so you can write servers or clients for more complicated applications.


pkgId: d37a63fd8f790be479ec04697298f9c80b497fe10d95d6a195e06a2ae6cbda07
name: perl-Net-Server
arch: noarch
version: 2.014
epoch: 0
release: 10.fc44
summary: Extensible, general Perl server engine
url: https://metacpan.org/release/Net-Server
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Server-2.014-10.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Server-2.014-10.fc44.noarch.rpm
checksum_type: sha256
description:
  An extensible, class oriented module written in perl and intended to
  be the back end layer of internet protocol servers.


pkgId: 6f891c1f52bb3fd571728ba4d21636c03ec15ca1d0f605e88b7d8889ebb9a3ff
name: perl-Net-Server-Coro
arch: noarch
version: 1.3
epoch: 0
release: 32.fc44
summary: Co-operative multithreaded server using Coro
url: https://metacpan.org/release/Net-Server-Coro
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Server-Coro-1.3-32.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Server-Coro-1.3-32.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::Server::Coro implements multithreaded server for the Net::Server
  architecture, using Coro and Coro::Socket to make all reads and writes non-
  blocking. Additionally, it supports non-blocking SSL negotiation.


pkgId: 9e4b05d207e177c841b37eba958295e929da11706842fa51928dad52a3d0de76
name: perl-Net-Server-SS-PreFork
arch: noarch
version: 0.05
epoch: 0
release: 44.fc44
summary: Hot-deployable variant of Net::Server::PreFork
url: https://metacpan.org/release/Net-Server-SS-PreFork
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-20.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Server-SS-PreFork-0.05-44.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Server-SS-PreFork-0.05-44.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::Server::SS::PreFork is a Net::Server personality, extending
  Net::Server::PreFork. It can be run by the start_server script of
  Server::Starter.


pkgId: 718bd75865093cc8de0bd22cd0586454de3e0a5d198adce9bccae4a971782fc9
name: perl-Net-Statsd
arch: noarch
version: 0.12
epoch: 0
release: 29.fc44
summary: Sends statistics to the stats daemon over UDP
url: https://metacpan.org/release/Net-Statsd
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Statsd-0.12-29.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Statsd-0.12-29.fc44.noarch.rpm
checksum_type: sha256
description:
  This module implements a client for a statsd statistics collection server, such
  as the one in use at Etsy.com.

  You want to use this module to track statistics in your Perl application, such
  as how many times a certain event occurs (user logins in a web application, or
  database queries issued), or you want to time and then graph how long certain
  events take, like database queries execution time or time to download a certain
  file, etc.


pkgId: 9a6e24a259596c02680b7503c149ada257e7128949baa357afad3db16567a6a6
name: perl-Net-Statsd-Server
arch: noarch
version: 0.20
epoch: 0
release: 30.fc44
summary: Library for the Perl port of Flickr/Etsy's statsd metrics daemon
url: https://metacpan.org/release/Net-Statsd-Server
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-23.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Statsd-Server-0.20-30.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Statsd-Server-0.20-30.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::Statsd::Server is the server component of statsd. It implements a daemon
  that listens on a given host/port for incoming UDP packets and dispatches them
  to whatever you want, including Graphite or your console.  Look into the
  Net::Statsd::Server::Backend::* name space to know all the possibilities, or
  write a back-end yourself.


pkgId: a42bd5b0fad678479b2deb782289cac26b4926a59469a57fea784c65217aacda
name: perl-Net-Stomp
arch: noarch
version: 0.62
epoch: 0
release: 5.fc44
summary: Stomp client module for Perl
url: https://metacpan.org/release/Net-Stomp
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Stomp-0.62-5.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Stomp-0.62-5.fc44.noarch.rpm
checksum_type: sha256
description:
  This module allows you to write a Stomp client. Stomp, the Streaming Text
  Orientated Messaging Protocol, is a simple and easy to implement protocol
  for working with Message Orientated Middleware.

  Net::Stomp can be used to communicate with Apache ActiveMQ, an
  enterprise-level Java Message Service 1.1 (JMS) message broker.


pkgId: ed23796782eaf01b1cc1456c9f2cbc2cb280e5fb955a2a40c885ca3dd74e06fc
name: perl-Net-Telnet
arch: noarch
version: 3.05
epoch: 0
release: 14.fc44
summary: Interact with TELNET port or other TCP ports
url: https://metacpan.org/release/Net-Telnet
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-41.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Telnet-3.05-14.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Telnet-3.05-14.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::Telnet allows you to make client connections to a TCP port and do
  network I/O, especially to a port using the TELNET protocol. Simple I/O
  methods such as print, get, and getline are provided. More sophisticated
  interactive features are provided because connecting to a TELNET port
  ultimately means communicating with a program designed for human interaction.
  These interactive features include the ability to specify a time-out and to
  wait for patterns to appear in the input stream, such as the prompt from a
  shell. IPv6 support is available when using perl 5.14 or later.


pkgId: 2e3ecdb4fca5ecf2d8e4a1208170318425874cfe117c31bc5bce2788ac12c4c4
name: perl-Net-Whois-Raw
arch: noarch
version: 2.99.042
epoch: 0
release: 2.fc44
summary: Get Whois information for domains
url: https://metacpan.org/release/Net-Whois-Raw
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.rdu3.fedoraproject.org
rpm_sourcerpm: perl-Net-Whois-Raw-2.99.042-2.fc44.src.rpm
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Whois-Raw-2.99.042-2.fc44.noarch.rpm
checksum_type: sha256
description:
  Net::Whois::Raw queries WHOIS servers about domains. The module supports
  recursive WHOIS queries. Also queries via HTTP is supported for some TLDs.


