intel-e1000e-kmp-default-2.1.4_3.0.13_0.27-2.1.x86_64
[99 KiB] |
Changelog
by sbahling@suse.de (2012-09-11):
- Inital SUSE PLDP build of automatic source pull from e1000.sf.net
Pulled from http://ignum.dl.sourceforge.net/project/e1000/e1000e%20stable/2.1.4/e1000e-2.1.4.tar.gz
- Release README:
ChangeLog for e1000e-2.1.4
* 82577/8/9 - increase MSE threshold to avoid unexpected link drop
* 82571 Tx Data Corruption during Tx hang recovery
* 82571 serdes link instability if auto-negotiation fails - RH bug #771366
* 82571 serdes link issue - RH #840642 and SF #346
* Enable EEE on 82579/i217 only when link partner is capable of EEE
* DoS while TSO enabled caused by link partner with small MSS
* Program the correct register for ITR when using MSI-X on 82574
* Test that 82577/82578/82579/i217 PHY is accessible otherwise driver can fail
to load
* remove use of the unnecessary IP payload checksum to allow concurrent use of receive hashing offload and jumbo frames
* implement mdi-mdix setting supporton 82577/9
* use more informative logging macros when netdev not yet registered
* compile failure on 2.6.37+ kernels with CFLAGS_EXTRA="-DE1000E_NO_NAPI"
* bug in bit shift when setting SMBus frequency on i217
* Upstream commit 80be3129d7152fe73b7d5db4595e2f4267497f24 - e1000e: add transmit timestamping support
* Upstream commit 59aed95263bdd0e2b48eb9be5a94346d2d4abf90 - e1000e: Remove special case for 82573/82574 ASPM L1 disablement
* Upstream commit d4a4206ebbaf48b55803a7eb34e330530d83a889 - e1000e: Disable ASPM L1 on 82574
* Upstream commit 727c356f4d799b53f94cf8fe43e19d64482348c7 - e1000e: Fix default interrupt throttle rate not set in NIC HW
* Upstream commit 569a3aff70e880588fe4b3f1622ac60abbeb4a28 - e1000e: MSI interrupt test failed, using legacy interrupt
|